Flexural Limit Design of Column Footings
Publication: Journal of Structural Engineering
Volume 111, Issue 11
Abstract
Flexural collapse loads of eccentrically loaded, individual column footings were investigated using Yield Line Theory. It was found that the cantilever failure mechanism recommended by the AC! Building Code does not give the lowest upper bound on the loads. Governing equations were derived for mechanisms that led to flexural collapse loads as low as one‐half those predicted by the cantilever mechanism for some column/footing combinations. Suggestions are given for a reasonably simple design procedure that should ameliorate the problem.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
“Building Code Requirements for Reinforced Concrete,” and Commentary thereon, ACI 318‐83, American Concrete Institute Committee 318, American Concrete Institute, Detroit, Mich., 1983.
2.
Fox, R. L., “Optimization Methods for Engineering Design,” Addison‐Wesley Publishing Co., Reading, Mass., 1971.
3.
Gesund, H., “Limit Design of Slabs for Concentrated Loads,” Journal of the Structural Division, ASCE, Proc. Vol. 107, No. ST9, Paper No. 16504, Sept., 1981, pp. 1839–1856.
4.
Gesund, H., “Flexural Limit Analysis of Concentrically Loaded Column Footings,” Journal of the American Concrete Institute, Proc. Vol. 80, No. 3, Title No. 80‐23, May–June, 1983, pp. 223–228.
5.
Johansen, K. W., “Yield Line Theory,” Cement and Concrete Association, London, England, 1962, 181 pp.
6.
Lenschow, R., and Sozen, M. A., “A Yield Criterion for Reinforced Concrete Slabs,” Journal of the American Concrete Institute, Proc. Vol. 64, No. 5, 1967, pp. 266–273.
7.
Mills, G. M., “A Partial Kinking Yield Criterion for Reinforced Concrete Slabs,” Magazine of Concrete Research, Vol. 27, No. 90, 1975, pp. 13–22.
8.
Sawczuk, A., and Jaeger, T., “Grenztragfahigkeitstheorie der Platten,” Springer Verlag, Berlin, Germany, 1963, 522 pp.
Information & Authors
Information
Published In
Copyright
Copyright © 1985 ASCE.
History
Published online: Nov 1, 1985
Published in print: Nov 1985
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.