Flexural Strength of Square Spread Footing
Publication: Journal of Structural Engineering
Volume 109, Issue 8
Abstract
The collapse load of a reinforced concrete square spread footing under column load is derived by using the theory of plasticity. Several upper bound solutions corresponding to different yield line patterns are obtained. Since the footing slab is rigidly connected to the column end, only the so‐called rigid collapse modes are considered. The solution having the lowest collapse load gives a bending moment at the face of the column equal to that used in American practice. Lower bound solutions are also developed which together with the upper bound solutions show where the exact solution might be. The influence of nonuniform soil pressure under the footing slab upon its carrying capacity is also investigated. A comparison between the theoretical results and existing test data indicates the average measured collapse load is higher than the least upper bound which may partly be attributed to the change in contact pressure, especially near failure. It also proves the bending moment used in some foreign design codes and text books is on the unsafe side.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Dieterle, H., “Fur Bemessung von Fundamentplatten ohne Schubbewehrung,” Beton und Stahlbetonbau, Heft 2, Feb., 1978, pp. 29–37.
2.
Eveyangsky, A. M., Reinforced Concrete Structures, Moscow, Russia, 1965.
3.
Ferguson, P. M., Reinforced Concrete Fundamentals, John Wiley and Sons, Inc., New York, N.Y., 1979.
4.
Hillerborg, A., Strip Method of Design, a Viewpoint Publication, London, England, 1975.
5.
Kondo, Y., et al., Reinforced Concrete Design, People's Science Publications, Tokyo, Japan, 1976.
6.
Levanov, N. M., and Suvolky, D. G., Reinforced Concrete Structures, Moscow, Russia, 1965.
7.
Meyerhof, G. G., and Rao, K. S. S., “Collapse Load of Reinforced Concrete Footings,” Journal of the Structural Division, ASCE, Vol. 100, No. ST5, Proc. Paper 10531, May, 1974, pp. 1001–1018.
8.
Richart, F. E., “Reinforced Concrete Wall and Column Footings,” Journal of the American Concrete Institute, Proceedings, Vol. 45, Part 1, Oct., 1948, pp. 97–127 (Part 2, Nov., 1948, pp. 237–260).
9.
Soil Mechanics and Foundation Engineering, Tianjin University, China Architectural Industry Publishing House, Beijing, China, 1978.
10.
Wada, B., “New Structural Design Practice,” Reinforced Concrete, Gakuge Publishing House, Tokyo, Japan, 1976.
Information & Authors
Information
Published In
Copyright
Copyright © 1983 ASCE.
History
Published online: Aug 1, 1983
Published in print: Aug 1983
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.