Single‐Span Deep Beams
Publication: Journal of Structural Engineering
Volume 109, Issue 3
Abstract
The multiple Fourier technique is used to compare the stress fields in single span deep beams due to uniform loading at the top edge and at the bottom edge. The method involves the superposition of three stress functions. The first stress function is used to satisfy the boundary conditions on the upper and lower edges of the beam. The second and third stress functions are used to satisfy the boundary conditions on the vertical edges of the beam. This approach allows to satisfy all the required boundary conditions. Contour maps of the stress field reveal the existence of regions of pure tension and pure compression. These regions indicate proneness to spalling, bursting or crushing.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Archer, F. A., and Kitchen, E. M., “Stresses in Single Span Deep Beams,” Australian Journal of Applied Science, Vol. 7, No. 4, 1956, pp. 314–326.
2.
Chow, L., “Stress in Deep Beams,” thesis presented to Cornell University, at Ithaca, N.Y., in 1951, in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
3.
Conway, H. D., Chow, L., and Morgan, G. W., “Analysis of Deep Beams,” Journal of Applied Mechanics, ASME, Vol. 18, No. 2, June, 1951, pp. 163–172.
4.
Chow, L., Conway, H. D., and Winter, G., “Stresses in Deep Beams,” Transactions, Vol. 118, 1953, pp. 686–708.
5.
“Design of Deep Girders,” Portland Cement Association, Pamphlet No. ST 66, Concrete Information, Structural Bureau, Chicago, Ill.
6.
Dischinger, F., “Beitrag zur Theorie der Halbscheibe und des wandartigen Trāgers,” Publications, International Association for Bridge and Structural Engineering, Zurich, Switzerland, Vol. 1, 1932, pp. 69–93.
7.
Geer, E., “Stresses in Deep Beams,” Journal of the American Concrete Institute, Vol. 31, No. 7, 1960, pp. 651–661.
8.
Girkmann, K., “Flächentragwerke,” 5th edition, Springer‐Verlag, Vienna, Austria, 1959, p. 84.
9.
Guzmán, A. M., Luisoni, C. J., “Sobre la viga simplemente apoyada de gran altura. Teoria y experimentatión,” Ciencia y Téncia, Buenos Aires, Argentina, Vol. 114, No. 576, 1950.
10.
Holmes, M., and Mason, P. M., “Stresses in Deep Beams,” Building Science, Vol. 7, 1972, pp. 225–232.
11.
Little, R. W., Elasticity, Prentice Hall Inc., Englewood Cliffs, New Jersey, 1973, pp. 116.
12.
Pickett, G., “Application of the Fourier Method to the Solution of Certain Boundary Problems in the Theory of Elasticity,” Journal of Applied Mechanics, II, 1944, pp. 176–182.
13.
Schleeh, W., “Die statisch unbestimmt gestutzte durchlaufende Scheibe,” Bet. u. Stahlbet. Vol. 59, No. 3, pp. 49–56;
No. 4, pp. 91–94;
No. 5, pp. 111–119, 1964.
14.
Uhlmann, H. L., “The Theory of Girder Walls with Special Reference to Reinforced Concrete Design,” The Structural Engineer, Vol. XXX, No. 8, London, England, Aug., 1952, pp. 172–181.
Information & Authors
Information
Published In
Copyright
Copyright © 1983 ASCE.
History
Published online: Mar 1, 1983
Published in print: Mar 1983
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.