Hydraulic Friction Factors for Pipe Flow
Publication: Journal of Irrigation and Drainage Engineering
Volume 114, Issue 2
Abstract
Hydraulic friction loss in pipelines directly affects pipe and pump sizing, as well as the hydraulic balance of networks. All friction head‐loss equations have an uncertainty in the estimation of pipe interior surface roughness. When a single resistance coefficient based only on the pipe material is used, different equations may give significantly different estimates of frictional head losses depending on pipe size and water flow rate. In complex pipe network systems, minor differences in equations or coefficients may accumulate and result in vastly different predicted head losses or flow rates in individual pipes. This study presents mathematical relationships and nomographs to relate the friction factors of three widely used pipe friction equations and to determine the magnitude of the differences in calculated head losses. Friction factors are developed to be used with the Hazen‐Williams and the Manning equations for PVC and cast‐iron pipes that give similar calculated head losses to those of the Darcy‐Weisbach equation. The variation of the friction factors with diameter and flow conditions is presented, and computer implementation of the variable friction factors is discussed.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Addink, J. W., et al. (1983). “Design and operation of sprinkler systems.” Design and operation of farm irrigation systems, M. E. Jensen, ed., American Society of Agricultural Engineers, St. Joseph, Mo.
2.
Anderson, C. B. (1967). “Mechanics of fluids.” Standard Handbook for mechanical engineers, T. Baumeister, ed., 7th Ed., McGraw‐Hill, Inc., New York, N.Y.
3.
Committee on Pipeline Planning. (1975). Pipeline design for water and wastewater, ASCE, New York, N.Y.
4.
Giles, R. V. (1962). Fluid mechanics and hydraulics, 2nd Ed. McGraw‐Hill, Inc., New York, N.Y.
5.
Hansen, V. E., Israelsen, O. W., and Stringham, G. E. (1979). Irrigation principles and practices, 4th Ed., John Wiley and Sons, Inc., New York, N.Y.
6.
Heermann, D. F., and Kohl, R. A. (1983). “Fluid dynamics of sprinkler systems.” Design and operation of farm irrigation systems, M. E. Jensen, ed., American Society of Agricultural Engineers, St. Joseph, Mo.
7.
Hughes, T. C., and Jeppson, R. W. (1978). “Hydraulic friction loss in small diameter plastic pipelines.” Water Resour. Bull., 14(5), 1159–1166.
8.
Jeppson, R. W. (1976). Analysis of flow in pipe networks. Ann Arbor Science Publishers, Inc., Ann Arbor, Mich.
9.
Karmeli, D., Gadish, Y., and Meyers, S. (1968). “Design of optimal water distribution networks.” J. Pipeline Div., ASCE, 94(1), 1–10.
10.
Keller, J. (1965). “Selection of economical pipe sizes for sprinkler irrigation systems.” Trans. ASAE, 8(2), 186–190.
11.
King, H. W. (1954). “Pipes.” Handbook of hydraulics, E. F. Brater, ed., 4th Ed., McGraw‐Hill, Inc., New York, N.Y.
12.
Lee, F. S. Y. (1959). “Pipe‐flow formulas compared by nomograph.” Civ. Engrg., ASCE, 29(11), 60–61.
13.
Mandry, J. E. (1967). “Design of pipe distribution systems for sprinkler projects.” J. Irrig. and Drain. Engrg., ASCE, 93(3), 243–257.
14.
Nelson, S. B. (1976). “Water engineering.” Standard handbook for civil engineers, F. S. Merritt, ed., 2nd Ed., McGraw‐Hill Company, Inc., New York, N.Y.
Information & Authors
Information
Published In
Journal of Irrigation and Drainage Engineering
Volume 114 • Issue 2 • May 1988
Pages: 311 - 323
Copyright
Copyright © 1988 ASCE.
History
Published online: May 1, 1988
Published in print: May 1988
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.