Hydraulics of Tangential Vortex Intake for Urban Drainage
This article has a reply.
VIEW THE REPLYThis article has a reply.
VIEW THE REPLYPublication: Journal of Hydraulic Engineering
Volume 135, Issue 3
Abstract
A tangential vortex intake is a compact structure that can convey storm water efficiently as a swirling flow down a vortex dropshaft. It has been studied in physical models and successfully employed in urban drainage and hydroelectric plant applications, but a comprehensive account of the key flow characteristics has not been reported and a theoretical design guideline of a tangential intake is not available. In this study the hydraulics of tangential slot vortex intakes is investigated via extensive experiments. It is found that the flow in the tapering and downward sloping vortex inlet channel is strongly dependent on the geometry of the inlet and dropshaft. Under some conditions, hydraulic instability and overflow can occur, rendering the design ineffective. It is shown that the hydraulic stability depends on the discharge at which flow control shifts from upstream to downstream , as well as the free drainage discharge . A theoretical design criterion for stable flow is developed in terms of and as a function of the vortex inlet geometry. For a “stable” design, the flow in the tapering inlet evolves from supercritical flow to subcritical flow smoothly as the discharge increases. Fifteen different tangential vortex intake models are tested. The experimental observations are in excellent agreement with the theoretical prediction. The present study provides a general guideline for designing a tangential vortex intake that can convey the flow smoothly without unstable fluctuating flow associated with a hydraulic jump.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was engendered by a series of model studies of vortex flow intakes for the Drainage Service Department (DSD) of Hong Kong Special Administrative Region, China, and in part supported by the Hong Kong Research Grants Council (RGC HKU7143/06E). The assistance of Mr. Edward Lai in the experimental investigation is gratefully acknowledged. This paper was prepared during a research visit supported by the Alexander von Humboldt Foundation.
References
Arega, F., Lee, J. H. W., and Tang, H. W. (2008). “Hydraulic jet control for river junction design of Yuen Long Bypass Floodway, Hong Kong.” J. Hydraul. Eng., 134(1), 23–33.
Binnie, A. M., and Hookings, G. A. (1948). “Laboratory experiments on whirlpools.” Proc. R. Soc. London, Ser. A, 194(1038), 398–415.
Brooks, N. H., and Blackmer, W. H. (1962). “Vortex energy dissipator for San Diego ocean outfall—Laboratory investigations.” Rep. No. KH-R-5, W. M. Keck Laboratory of Hydraulics and Water Resources, California Institute of Technology, Pasadena, Calif.
Drainage Services Department (DSD). (2003). “Stormwater drainage master plan study in northern Hong Kong Island—Executive summary.” Agreement No. CE 91/95, The Government of Hong Kong Special Administrative Region, Drainage Services Department, Hong Kong.
Jain, S. C. (1984). “Tangential vortex-inlet.” J. Hydraul. Eng., 110(12), 1693–1699.
Jain, S. C., and Ettema, R. (1987). “Vortex-flow intakes.” Swirling flow problems at intakes, IAHR hydraulic structures design manual, J. Knauss, ed., Balkema, Rotterdam, The Netherlands, 125–137.
Jain, S. C., and Kennedy, J. F. (1983). “Vortex-flow drop structures for the Milwaukee metropolitan sewerage district inline storage system.” Rep. No. IIHR Rep. No. 264, Iowa Institute of Hydraulic Research, The Univ. of Iowa, Iowa City, Iowa.
Jevdjevich, V., and Levin, L. (1953). “Entrainment of air in flowing water and technical problems connected with it.” Proc., Minnesota International Hydraulics Convention, ASCE, St. Anthony Falls Hydralic Lab.
Lee, J. H. W., Chan, C. H. C., Kuang, C. P., Clark, P., Townsend, N., and Shiu, W. Y. (2008). “Hydraulic model study of the Tai Hang Tung storage scheme.” J. Hydraul. Res., 46(1), 11–23.
Lee, J. H. W., Yu, D., and Choi, D. K. W. (2006). “Physical hydraulic model tests for Lai Chi Kok transfer scheme—Intake structures.” Croucher Laboratory of Environmental Hydraulics, The Univ. of Hong Kong, Hong Kong.
Slisskii, S. M., Kuznetsov, E. B., and Akhmedov, T. K. (1980). “Multistage whirlpool shaft spillway.” Power Tech. and Eng.; formerly, Hydrotech. Constr., 14(9), 892–895.
Toda, K., and Inoue, K. (1999). “Hydraulic design of intake structures of deeply located underground tunnel systems.” Water Sci. Technol., 39(9), 137–144.
Vischer, D. L., and Hager, W. H. (1995). “Vortex drops.” in Energy dissipaters, IAHR hydraulic structures design manual 9, D. L. Vischer and W. H. Hager, eds., Balkema, Rotterdam, The Netherlands, 167–181.
Zhao, C. H., Zhu, D. Z., Sun, S. K., and Liu, Z. P. (2006). “Experimental study of flow in a vortex drop shaft.” J. Hydraul. Eng., 132(1), 61–68.
Information & Authors
Information
Published In
Copyright
© 2009 ASCE.
History
Received: Feb 25, 2008
Accepted: Aug 25, 2008
Published online: Mar 1, 2009
Published in print: Mar 2009
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.