Frequency Modeling of Open-Channel Flow
Publication: Journal of Hydraulic Engineering
Volume 130, Issue 8
Abstract
A good model is necessary to design automatic controllers for water distribution in an open-channel system. The frequency response of a canal governed by the Saint-Venant equations can be easily obtained in the uniform case. However, in realistic situations, open-channel systems are usually far from the uniform regime. This paper provides a new computational method to obtain a frequency domain model of the Saint-Venant equations linearized around any stationary regime (including backwater curves). The method computes the frequency response of the Saint-Venant transfer matrix, which can be used to design controllers with classical automatic control techniques. The precision and numerical efficiency of the proposed method compare favorably with classical numerical schemes (e.g., Runge–Kutta). The model is compared in nonuniform situations to the one given by a finite difference scheme applied to Saint-Venant equations (Preissmann scheme), first in the frequency domain, then in the time domain. The proposed scheme can be used, e.g., to validate finite difference schemes in the frequency domain.
Get full access to this article
View all available purchase options and get full access to this article.
References
Arnold, V. (1978). Ordinary differential equations, MIT Press, Cambridge, Mass.
Aström, K., and Wittenmark, B. (1990). Computer controlled systems: Theory and design, Prentice-Hall International Editions, London, 544.
Balogun, O., Hubbard, M., and DeVries, J.(1988). “Automatic control of canal flow using linear quadratic regulator theory.” J. Hydraul. Eng., 114(1), 75–102.
Barré de Saint-Venant, A. J. C.(1871a). “Théorie du mouvement non-permanent des eaux avec application aux crues des rivières et à l’introduction des marées dans leur lit.” Acad. Sci., Paris, C. R., 73, 148–154.
Barré de Saint-Venant, A. J. C.(1871b). “Théorie du mouvement non-permanent des eaux avec application aux crues des rivières et à l’introduction des marées dans leur lit.” Acad. Sci., Paris, C. R., 73, 237–240.
Baume, J., and Sau, J. (1997). “Study of irrigation canal dynamics for control purposes.” Int. Workshop RIC’97, 3–12.
Buyalski, C., Ehler, D., Falvey, H., Rogers, D., and Serfozo, E. (1991). “Canal systems automation manual, volume 1.” Proc., Int. Workshop on the Regulation of Irrigation Canals: State of the Art of Research and Applications, Cemagref, Montpellier, Technical Rep., U.S. Department of Interior, Bureau of Reclamation, Denver, 113.
Chow, V. (1988). Open-channel hydraulics, McGraw-Hill, New York, 680.
Constantinides, C., Kia-Koojoori, T., and Jacquot, R.(1976). “Stability of a feedback controlled distributed system by model representation.” Int. J. Syst. Sci., 7(9), 989–1003.
Corriga, G., Patta, F., Sanna, S., and Usai, G.(1979). “A mathematical model for open-channel networks.” Appl. Math. Model., 3, 51–54.
Cunge, J. A. (1966). “Etude d’un schéma de différences finies appliqué à l’intégration numérique d’un certain type d’équations hyperboliquesd’écoulement.” PhD thesis, Faculté des Sciences de Grenoble (in French).
Cunge, J., Holly, F., and Verwey, A. (1980). Practical aspects of computational river hydraulics, Pitman, New York.
Deltour, J.-L. (1995). “The canal de Provence dynamic regulation sys-tem: A safe and suitable process for operating water conveyance structures.” Proc., 1st Int. Conf. on Water Resources Engineering, ASCE, Reston, Va., 56–60.
Ermolin, Y.(1992). “Study of open-channel dynamics as controlled process.” J. Hydraul. Eng., 118(1), 59–72.
Garcia, A., Hubbard, M., and DeVries, J.(1992). “Open-channel transient flow control by discrete time LQR methods.” Automatica, 28(2), 255–264.
Hancu, S., and Dan, P.(1992). “Wave-motion stability in canals with automatic controllers.” J. Hydraul. Eng., 118(12), 1621–1638.
Litrico, X., and Fromion, V. (2002). “Infinite dimensional modelling of open-channel hydraulic systems for control purposes.” Proc., 41st Conf. on Decision and Control, IEEE, Piscataway, N.J., 1681–1686.
Ljung, L. (1987). System identification. Theory for the user, Prentice–Hall, Englewood Cliffs, N.J.
Malaterre, P.-O.(1998). “PILOTE: linear quadratic optimal controller for irrigation canals.” J. Irrig. Drain. Eng., 124(4), 187–194.
Malaterre, P.-O., and Baume, J.-P. (1997). “SIC 3.0, a simulation model for canal automation design.” Proc., Int. Workshop on the Regulation of Irrigation Canals RIC’97, Washington, D.C.
Plusquellec, H., Burt, C., and Wolter, H. (1994). “Modern water control in irrigation.” Proc., Int. Workshop of the Regulation of Irrigation Canals: State of the Art of Research and Applicaitons No. 246, Cemagref, Montpellier, Technical Rep., World Bank, Irrigation and Drainage Series.
Rogers, D., et al. (1995). “Canal systems automation manual, volume 2.” Technical Rep.: A Water Resources Technical Publication, U.S. Department of Interior, Bureau of Reclamation, Washington, D.C.
Schuurmans, J., Bosgra, O., and Brouwer, R.(1995). “Open-channel flow model approximation for controller design.” Appl. Math. Model., 19, 525–530.
Schuurmans, J., Clemmens, A. J., Dijkstra, S., Hof, A., and Brouwer, R.(1999). “Modeling of irrigation and drainage canals for controller design.” J. Irrig. Drain. Eng., 125(6), 338–344.
Shand, M. (1971). “Automatic downstream control systems for irrigation canals.” PhD thesis, Univ. of California, at Berkeley, Berkeley, Calif.
Stoer, J., and Burlisch, R. (1993). “Introduction to numerical analysis.” Texts in applied mathematics, 2nd Ed., Springer, New York.
Information & Authors
Information
Published In
Copyright
Copyright © 2004 American Society of Civil Engineers.
History
Received: Aug 8, 2002
Accepted: Dec 9, 2003
Published online: Jul 15, 2004
Published in print: Aug 2004
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.