Development and Geometric Similarity of Alluvial Deltas
This article has a reply.
VIEW THE REPLYPublication: Journal of Hydraulic Engineering
Volume 127, Issue 1
Abstract
Movable bed experiments from a flume into a basin were conducted to study the development of alluvial deltas. The experimental setup was aimed at the bed-load mode. Results showed that the development of the delta can be divided into three stages. In the first stage, the delta progressed mainly in its length, and a successfully derived equation described the shape of the delta in this stage. In the second stage, the delta developed mainly in its width. The length, width, front thickness, and central thickness of the delta were used to scale the geometric similarity. The plane geometry of deltas can be described using Gaussian functions. Transverse and longitudinal profiles fit the hyperbolic and linear function, respectively. The length, width, and thickness of the delta deposition at the end of the second stage have their own maximum values, Rc, Bm, and Zf, respectively, for each case. The total volume V of sediment deposition could be simply related to these maximum values by V = αRcBmZf + β with shape parameters α and β around 0.178 and 174. The third stage was characterized by the interactions between the delta development and stream-channel variations. The ratios of the delta slope to the channel slope were closely related to the occurrence condition of the stream channel. Finally, the temporal variations of stream channels were investigated qualitatively.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Albertson, M. L., Dai, Y. B., Jensen, R. A., and Rouse, H. ( 1950). “Diffusion of submerged jets.” Trans. ASCE, 115, 639.
2.
Ashida, K., Sawai, K., and Shieh, C. L. ( 1987). “A study on the delta formation process in a laterally wide basin-laboratory study of delta formation caused by bed load.” Annu., Dias. Prev. Res. Inst., 30, B-2, 475–491 (in Japanese).
3.
Ashida, K., Sawai, K., and Shieh, C. L. ( 1988). “A study on the delta formation process in a laterally wide basin-laboratory study of the influence on the delta formation process associated with suspended load and longshore current.” Annu., Dias. Prev. Res. Inst., 31, B-2, 477–487 (in Japanese).
4.
Ashida, K., Sawai, K., and Shieh, C. L. ( 1989). “A study on the delta formation process in a laterally wide basin-simulation of the development of delta with/without channels on its plain.” Annu., Dias. Prev. Res. Inst., 32, B-2, 553–570 (in Japanese).
5.
Chang, H. H. (1982). “Fluvial hydraulics of deltas and alluvial fans.”J. Hydr. Div., ASCE, 108(11), 1282–1295.
6.
Iwagaki, Y. ( 1956). “Hydrodynamical study on critical tractive force.” Trans. JSCE, Tokyo, 41, 1–21 (in Japanese).
7.
Joshi, P. B. (1982). “Hydrodynamics of tidal jets.”J. Wtrwy., Port., Coast., and Oc. Div., ASCE, 108(3), 239–253.
8.
Long, Y. Q., and Qian, N. ( 1986). “Erosion and transportation of sediment in the Yellow River Basin.” Int. J. Sediment Res., 1(1), 2–38.
9.
Parker, G., Paola, C., Whipple, K. X., and Mohrig, D. (1998). “Alluvial fans formed by channelized fluvial and sheet flow. I: Theory.”J. Hydr. Engrg., ASCE, 124(10), 985–995.
10.
Tanaka, H., Suga, K., Takayama, H., and Hatori, S. ( 1987). “Formation of sand bar in front of a river mouth.” Proc., 31st Japanese Conf. on Hydr., 737–742 (in Japanese).
11.
Wright, L. D., and Coleman, J. M. ( 1974). “Mississippi river mouth processes: Effluent dynamics and morphologic development.” J. Geol., 82, 751–778.
Information & Authors
Information
Published In
History
Received: Apr 24, 2000
Published online: Jan 1, 2001
Published in print: Jan 2001
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.