Triaxial Testing of Naturally Cemented Carbonate Soil
Publication: Journal of Geotechnical Engineering
Volume 119, Issue 9
Abstract
Cemented carbonate (calcarenite) soils obtained from the North West Shelf of Australia were subjected to conventional and stress‐path triaxial tests. Natural calcarenite specimens were found to have wide variations of dry density and degree of cementation. These variations complicate interpretation of the test data, and need to be taken into account. To achieve this, it is suggested that tensile tests be performed on off‐cuts to estimate the degree of cementation. The responses of the natural calcarenite samples were found to be similar to other cemented and structured soils. Stress‐path tests were performed to investigate the shape of the yield locus. An elastic region was identified in which the shear modulus is constant and the bulk modulus varies linearly with mean effective stress. The cementation was found to increase the shear modulus and size of the yield locus, but to have little effect on the volumetric response.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Airey, D. W., and Fahey, M. (1991). “Cyclic response of calcareous soil from the North‐West Shelf of Australia.” Geotechnique, 41(1), 101–122.
2.
Allman, M. A., and Poulos, H. G. (1988). “Stress‐strain behavior of an artificially cemented calcareous soil.” Engrg. for Calcareous Sediments: Proc. Int. Conf. on Calcareous Sediments, Inst. of Engrs., Australia, 1, 51–60.
3.
Bieniawski, Z. T., and Hawkes, I. (1978). Suggested methods for determining tensile strength of rock materials. Int. J. Rock Mech. & Min. Sci., 15(3), 99–103.
4.
Carter, J. P., Johnston, I. W., Fahey, M., Chapman, G. A., Novello, E. A., and Kaggwa, W. S. (1988). “Triaxial testing of North Rankin calcarenite.” Engrg. for Calcareous Sediments: Proc. Int. Conf. on Calcareous Sediments, 2, 515–530.
5.
Clough, G. W., Sitar, N., and Bachus, R. C. (1981). “Cemented sands under static loading.” J. Geotech. Engrg., ASCE, 107(6), 799–817.
6.
Coop, M. (1990). “The mechanics of carbonate sand.” Geotechnique, 40(4), 607–626.
7.
Datta, M., Gulhati, S. K., and Rao, G. V. (1980). “Crushing and shear behavior of calcareous sands.” Geotech '80, 1, 217–222.
8.
Farmer, I. W. (1983). Engineering behaviour of rocks. Chapman and Hall, London, England.
9.
Houlsby, G. T., Evans, K. M., and Sweeney, M. A. (1988). “End bearing capacity of model piles in layered carbonate soils.” Engrg. for Calcareous Sediments: Proc. Int. Conf. on Calcareous Sediments, 1, 209–214.
10.
Huang, J. T., and Airey, D. W. (1991). “The Manufacture of Cemented Carbonate Sands.” Res. Rep. R623, School of Civil and Mining Engrg., Sydney University, Sydney, Australia.
11.
Ishihara, K., and Okada, S. (1978). “Yielding of overconsolidated sand and liquefaction model under cyclic stress.” Soils and Foundations, 18(1), 57–72.
12.
Leroueil, S., and Vaughan, P. R. (1990). “The general and congruent effects of structure in natural soils and weak rocks.” Geotechnique, 40(3), 467–488.
13.
McLelland, B. (1988). “Calcareous sediments: an engineering enigma.” Proc. Int. Conf. on Calcareous Sediments, 2, 777–786.
14.
Nyland, G. (1988). “Detailed engineering geological investigation of North Rankin: A platform site.” Eng. for Calcareous Sediments, Inst. of Engrs., Australia, 2.
15.
Price, G. (1988). “Fabric of calcareous sediments at North Rankin: A north west shelf.” Proc. Int. Conf. on Calcareous Sediments, 2, 565–576.
16.
Schofield, A. N., and Wroth, C. P. (1968). Critical state soil mechanics. McGraw‐Hill, London, England.
17.
Scholz, C. H. (1968). “Microfracturing and the inelastic deformation of rock in compression.” J. Geophys. Res., 73, 1417–1432.
18.
Semple, R. M. (1988). “The mechanical properties of carbonate soils.” Proc. Int. Conf. on Calcareous Sediments, 2, 807–836.
19.
Vaughan, P. R. (1988). “Characterising the Mechanical Properties of in‐situ residual soil.” Proc. 2nd Int. Conf. on Geomechanics in Tropical Soils, 2, 469–487.
Information & Authors
Information
Published In
Copyright
Copyright © 1993 American Society of Civil Engineers.
History
Received: Mar 23, 1992
Published online: Sep 1, 1993
Published in print: Sep 1993
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.