Model Prediction of Cyclic Response of Soils
Publication: Journal of Geotechnical Engineering
Volume 116, Issue 7
Abstract
A new elastoplastic model has been developed for predicting the stress path, the stress/strain response, and the shear strength of soils under cyclic loading. The model utilizes multiyield surfaces and a combination of isotropic and kinematic hardening. The model is similar to that of Prevost (1978) but introduces several new concepts. A theoretical expression is derived for the permanent volumetric strain, which occurs during undrained cyclic loading, that reflects the anisotropic behavior of the soil. Theoretical derivations are also presented to show that during undrained cyclic loading the elastic bulk modulus is constant and that the Skempton pore‐water pressure coefficient, associated with each yield surface, does not vary from its initial value. These relationships considerably simplify the task of predicting the response of the soils under cyclic loading. Experimental verification of the model predictions for the stress path, stress/strain curve, and shear strength of a very loose sand are presented, together with the model predictions for a kaolin clay using published data.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Baladi, G. Y., and Rohani, B. (1979). “Elastic‐plastic model for saturated sand.” J. Geotech. Engrg. Div., ASCE, 105(4), 465–480.
2.
Castro, G., and Poulos, H. G. (1976). “Factors affecting liquefaction and cyclic mobility.” Annual Convention and Exposition, ASCE, Oct., 105–138.
3.
Chang, C. S., and Whitman, R. V. (1988). “Drained permanent deformation of sand due to cyclic loading.” J. Geotech. Engrg., ASCE, 114(10), 1164–1180.
4.
Dafalias, Y. F., and Herrmann, L. R. (1982). “A bounding surface formulation of soil plasticity.” Soils under cyclic and transient loading, G. N. Pande and Zienkiewicz, eds., John Wiley and Sons, Ltd., Chichester, England.
5.
Egan, J. A., and Sangrey, D. A. (1978). “Critical state model for cyclic load pore pressure.” Proc. Specialty Conf. Earthquake Engrg. Soil Dyn., American Society of Civil Engineers, 1, 410–424.
6.
Hardin, B. O., and Black, W. L. (1966). “Sand stiffness under various triaxial stresses.” J. Soil Mech. and Found. Engrg., ASCE, 92(2), 27–42.
7.
Kovacs, R. D., and Holtz, W. D. (1981). An introduction to geotechnical engineering. Prentice Hall, Englewood Cliffs, N.J., 512–518.
8.
Lade, P. V., and Duncan, J. M. (1975). “Elastoplastic stress‐strain theory for cohesionless soil.” J. Geotech. Engrg. Div., ASCE, 101, 1031–1053.
9.
Lambe, T. W., and Whitman, R. V. (1969). Soil mechanics. John Wiley and Sons, Inc., New York, N.Y.
10.
Liou, C. P., Streeter, V. L., and Richart, F. E., Jr. (1976). “A numerical model for liquefaction.” Annual Convention and Exposition, ASCE, Oct., 313–358.
11.
Mroz, Z., Norris, V. A., and Zienkiewicz, O. C. (1979). “An application of an anisotropic hardening model in the analysis of elasto‐plastic deformation of soils.” Geotechnique, 29(1), 1–34.
12.
Mroz, A., Norris, V. A., and Zienkiewicz, O. C. (1981). “An isotropic critical state model for soils subject to cyclic loading.” Geotechnique, 31(4), 451–469.
13.
Phillips, A., and Weng, G. H. (1975). “An undrained study of an experimentally verified law.” J. Appl. Mech., 42(2), 375–378.
14.
Prevost, J. H. (1978). “Plasticity theory for soil stress‐strain behavior.” J. Engrg. Mech., 104(5), 1177–1193.
15.
Prevost, J. H., and Hughes, T. J. R. (1978). “Mathematical modeling of cyclic soil behavior.” Proc. Specialty Conf. Earthquake Engrg. Soil Dyn., American Society of Civil Engineers, 1.
16.
Roscoe, K. H., and Burland, J. B. (1968). “On generalized stress/strain behavior of wet clay.” Engineering plasticity, J. Heyman and F. A. Leckis, eds., Cambridge University Press, Cambridge, England, 535–600.
17.
Roscoe, K. H. (1975). “The influence of strains in soil mechanics.” Milestones in soil mechanics—The first ten rankine lectures, Thomas Telford Ltd., The Institution of Civil Engineers, 263–281.
18.
Rowe, P. W. (1962). “The stress‐dilatancy relation for static equilibrium of an assembly of particles in contact.” Proc., Royal Memorial Symp., R. H. G. Parry, ed., G. T. Foulis, Oxfordshire, England, 500–527.
19.
Rowe, P. W. (1972). “Stress‐strain relationship for particulate materials in equilibrium.” Proc., Specialty Conf. on the performance of Earth Supported Structures, Purdue University, Lafayette, Ind., 327–359.
20.
Sandler, I. S., DiMaggio, F. L., and Baladi, G. Y. (1976). “Generalized cap model for geologic materials.” J. Geotech. Engrg., ASCE, 102(7), 683–699.
21.
Valanis, K. C., and Read, H. E. (1982). “A new endochronic plasticity model for soils.” Soil mechanics—Transient and cyclic loads, G. N. Pande and O. C. Zienkiewicz, eds., John Wiley and Sons, Inc., New York, N.Y.
Information & Authors
Information
Published In
Copyright
Copyright © 1990 ASCE.
History
Published online: Jul 1, 1990
Published in print: Jul 1990
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.