Composite Infinite Element for Modeling Unbounded Saturated‐soil Media
Publication: Journal of Geotechnical Engineering
Volume 115, Issue 11
Abstract
This paper discusses the development of a mapped‐type compositeinfinite element for modeling the response of unbounded saturated‐soil media. The coordinate ascent mapping technique that uses conventional shape functions and the Gauss‐Legendre integration scheme is used for the formulation. The constructed element preserves the compatibility between the variations in effective stress and pore pressure. This compatibility is a basic requirement for the accurate numerical modeling of saturated media. The accuracy of the element has been evaluated by comparing the numerical solutions of problems involving unbounded media with the corresponding analytical solutions. The effects of both the remoteness of the truncated boundary and the location of the infinite element coupling to the finite elements on the solution accuracy has been investigated. It is observed that accurate numerical responses of unbounded media can be obtained by using infinite elements at a much lesser computational effort than the conventional finite‐element methods in which unbounded media are represented by large mesh configurations.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Abel, J. F., and Shephard, M. S. (1979). “An algorithm for multipoint constraints in finite element analyses.” Int. J. Num. Methods Eng., 11, 464–467.
2.
Banerjee, P. K., and Butterfield, R. (1981). Boundary element methods in engineering science. McGraw‐Hill Book Co., New York, N.Y.
3.
Bettess, P. (1977). “Infinite elements.” Int. J. Numer. Methods. Eng., 11, 53–64.
4.
Biot, M. A. (1941). “General theory of three‐dimensional consolidation.” J. Appl. Phys., 12, 155–164.
5.
Brebbia, C., and Walker, S. (1980). Boundary element techniques in engineering, Newnes Butterworths, London, England.
6.
Chiarella, C., and Booker, J. R. (1975). “The time settlement behaviour of a rigid die resting on a deep clay layer.” Q. J. Mech. Appl. Math., 28, 317–328.
7.
Christian, J. T. (1977). “Two and three dimensional consolidation.” Numerical Methods in Geotechnical Engineering, C. S. Desai and J. T. Christian, eds., McGraw‐Hill Book Company, New York, N.Y., 399–426.
8.
Curnier, A. (1983). “A static infinite element.” Int. J. Numer. Methods. Eng., 19, 1479–1488.
9.
Ghaboussi, J., and Wilson, E. L. (1972). “Variational formulation of dynamics of fluid‐saturated porous elastic solids.” J. Engrg. Mech. Div., ASCE, 98, 947–963.
10.
Ghaboussi, J., and Wilson, E. L. (1973). “Flow of compressible fluids in porous elastic media.” Int. J. Numer. Methods. Eng., 5, 419–442.
11.
Kumar, P. (1984). “Static infinite element formulation.” J. Struct. Engrg., ASCE, 111, 2355–2372.
12.
Lynn, P. P., and Hadid, H. A. (1981). “Infinite elements with type decay.” Int. J. Numer. Methods. Eng., 17, 347–355.
13.
Marquez, J. M. C., and Owen, D. R. J. (1984). “Infinite elements in quasi‐static materially non‐linear problems.” Comput. Struct., 18, 739–751.
14.
McNamee, J., and Gibson, R. E. (1960a). “Displacement functions and linear transforms applied to diffusion through porous elastic media.” Q. J. Mech. Appl. Math., 13, 98–111.
15.
McNamee, J., and Gibson, R. E. (1960b). “Plane strain and axisymmetric problems of the consolidation of a semi‐infinite clay stratum.” Q. J. Mech. Appl. Math., 13, 210–227.
16.
Rajapakse, R. K. N. D., and Karasudhi, P. (1985). “Elastostatic infinite elements for layered halfspaces.” J. Engrg. Mech., ASCE, 111, 1144–1158.
17.
Rajapakse, R. K. N. D., and Karasudhi, P. (1986). “An efficient elastodynamic infinite element.” Int. J. Solids Struct., 22, 643–657.
18.
Sandhu, R. S., and Wilson, E. L. (1969). “Finite element analysis of seepage in elastic media.” J. Engrg. Mech. Div., ASCE, 95(3), 641–652.
19.
Schrefler, B. A., and Simoni, L. (1987). “Non‐isothermal consolidation of unbounded porous media using mapped infinite elements.” Comm. Appl. Numer. Meth., 3, 445–452.
20.
Selvadurai, A. P. S., and Gopal, K. R. (1986). “Consolidation analysis of the screw plate test.” Proc. 39th Canadian Geotech. Conference, Ottawa, Canada, 167–178.
21.
Simoni, L., and Schreffler, B. A. (1987). “Mapped infinite elements in soil consolidation.” Int. J. Numer. Methods Eng., 24, 513–527.
22.
Timoshenko, S., and Goodier, J. N. (1970). Theory of elasticity. McGraw‐Hill Book Co., New York, N.Y.
23.
Zienkiewicz, O. C., Kelly, D. W., and Bettess, P. (1977). “The coupling of the finite element method and boundary solution procedures.” Int. J. Numer. Methods Eng., 11, 355–375.
24.
Zienkiewicz, O. C., et al. (1981). “Numerical methods for unbounded field problems and a new infinite element formulation.” ASME Winter Annual Meeting, The Appl. Mech. Div., Washington, D.C., 115–148.
25.
Zienkiewicz, O. C., Emson, C., and Bettess, P. (1983). “A novel boundary infinite element.” Int. J. Numer. Methods. Eng., 19, 393–404.
Information & Authors
Information
Published In
Journal of Geotechnical Engineering
Volume 115 • Issue 11 • November 1989
Pages: 1633 - 1646
Copyright
Copyright © 1989 ASCE.
History
Published online: Nov 1, 1989
Published in print: Nov 1989
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.