Creep Behavior of Hot-Mix Asphalt due to Heavy Vehicular Tire Loading
Publication: Journal of Engineering Mechanics
Volume 135, Issue 11
Abstract
The objective of this study is to characterize the creep behavior of hot-mix asphalt (HMA) at intermediate and at high temperatures . To accomplish this objective, a nonlinear time-hardening creep model, characterized through laboratory testing, was incorporated into a three-dimensional (3D) finite-element (FE) model, which was used to calculate permanent creep strains after applying repetitive vehicular loading cycles at the pavement surface. Two different tire configurations were simulated representing a typical dual-tire assembly and a newly introduced wide-base tire (dual-tire: 275/80R22.5 and wide-base tire: 455/55R22.5). Results of the 3D FE model were successfully verified against pavement response measurements in the field at the Virginia Smart Road. While the elastic or linear viscoelastic FE model may not simulate permanent deformation or shear creep strains after repetitions of vehicular loading, a nonlinear time-hardening creep model could predict primary rutting damage in HMA and shear creep strains at the edge of the tire imprint caused by different tire configurations.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The financial support provided by the Michelin Americas Research and Development Corporation is greatly appreciated. The writers acknowledge the technical assistance from the National Center for Super Computing Applications (NCSA) at the University of Illinois at Urbana-Champaign.
References
ABAQUS. (2005). ABAQUS/standard user’s manual version 6.5, Hibbit, Karlsson, & Sorenson, Pawtucket, R.I.
Al-Qadi, I. L., Loulizi, A., Elseifi, M. A., and Lahouar, S. (2004). “The Virginia Smart Road: The impact of pavement instrumentation on understanding pavement performance.” Electron. J. Assoc. Asph. Paving Technol., 73, 427–466.
Diefenderfer, B. K., Al-Qadi, I. L., and Diefenderfer, S. D., (2006). “Model to predict pavement temperature profile: Development and validation.” J. Transp. Eng., 132(2), 162–167.
Elseifi, M. A., Al-Qadi, I. L., and Yoo, P. J. (2006). “Viscoelastic modeling and field validation of flexible pavements.” J. Eng. Mech., 132(2), 172–178.
Fang, H., Haddock, J. E., White, T. D., and Hand, A. J. (2004). “On the characterization of flexible pavement rutting using creep model-based finite element analysis.” Finite Elem. Anal. Design, 41, 49–73.
Hua, J. (2000). “FEM modeling and analysis accelerated pavement testing devices and rutting.” Ph.D. thesis, Purdue Univ., West Lafayette, Ind.
Huang, H., and White, T. D. (1998). “Modeling and analysis of accelerated pavement tests.” Proc., 77th Annual Meeting Preprint, Transportation Research Record (CD-ROM), TRB, Washington, D.C.
Kraus, H. (1980). Creep analysis, Wiley, New York, 10–30.
Lai, J. S., and Anderson, D. (1973). “Irrecoverable and recoverable nonlinear visco-elastic properties of asphalt concrete.” Transportation Research Record. 468, Transportation Research Board, Washington, D.C., 73–88.
Long, F., and Monismith, C. L. (2002). “Use of nonlinear viscoelastic constitutive model for permanent deformation in asphalt concrete pavements.” Proc., 3rd Int. Symp. of 3D Finite Element for Pavement Analysis, Delft University of Technology, Delft, The Netherlands, 91–110.
Perl, M., Uzan, J., and Sides, A. (1983). “Visco-elasto-plastic constitutive law for a bituminous mixture under repeated loading.” Transportation Research Record. 911, Transportation Research Board, Washington, D.C., 20–26.
Sargand, S. (2002). “Three dimensional modeling of flexible pavement.” Final Rep. No. 14654, Ohio DOT, Columbus, Ohio.
Sousa, J. B., Weissman, S., Sackman, J., and Monismith, C. L. (1993). “A nonlinear elastic viscous with damage model to predict permanent deformation of asphalt concrete mixtures.” Transportation Research Record. 1384, Transportation Research Board, Washington, D.C., 80–93.
Yoo, P. J., Al-Qadi, I. L., Elseifi, M. A., and Janajreh, I. (2006). “Flexible pavement responses to different loading amplitudes considering layer interface conditions and lateral shear forces.” Int. J. Pavement Eng., 7-1, 73–86.
Information & Authors
Information
Published In
Copyright
© 2009 ASCE.
History
Received: Jan 23, 2007
Accepted: Jun 17, 2009
Published online: Oct 15, 2009
Published in print: Nov 2009
Notes
Note. Associate Editor: Dinesh R. Katti
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.