Axisymmetric Stress Analysis of a Thick Conical Shell with Varying Thickness under Nonuniform Internal Pressure
This article has been corrected.
VIEW CORRECTIONPublication: Journal of Engineering Mechanics
Volume 134, Issue 8
Abstract
A mathematical approach based on the perturbation theory has been used for axisymmetric stress analysis of a thick conical shell with varying thickness under nonuniform internal pressure. The equilibrium equations have been derived using the energy principle and considering the second-order shear deformation theory (SSDT), which includes shear deformation effects. This system of ordinary differential equations with variable coefficients has been solved analytically using the matched asymptotic expansion method of the perturbation theory. A comparison of the results with the finite-element method and the first-order shear deformation theory shows that the SSDT can predict the displacements and stresses of the shell for a wide range of thicknesses as well with less calculations than other analytical methods such as the Frobenius series method.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers would like to thank Professor K. Suzuki and Dr. M. J. Maghrebi for their kind cooperation.
References
Chang, C. H. (1967). “On the solution of conical shells of linearly varying thickness subjected to lateral normal loads.” Int. J. Solids Struct., 3(2), 177–190.
Chaudhry, H. R., et al. (1996). “Stresses and strains in the left ventricular wall approximated as a thick conical shell using large deformation theory.” J. Biol. Syst., 4(3), 353–372.
Correia, I. F. P., et al. (2003). “Analysis of laminated conical shell structures using higher order models.” Compos. Struct., 62(3–4), 383–390.
Cui, W., et al. (2001). “A simple and accurate solution for calculating stresses in conical shells.” Comput. Struct., 79(3), 265–279.
Eipakchi, H. R., et al. (2003). “Closed form solution for displacements of thick cylinders with varying thickness subjected to nonuniform internal pressure.” Struct. Eng. Mech., 16(6), 731–748.
McDonald, C. K., et al. (1973). “A second order solution of the nonlinear equations of conical shells.” Int. J. Non-Linear Mech., 8(1), 49–58.
Mirsky, I., et al. (1958). “Axially symmetric motions of thick cylindrical shells.” J. Appl. Mech., 25, 97–102.
Nayfeh, A. H. (1981). Introduction to perturbation techniques, Chap. 12, Wiley, New York.
Panferov, I. V. (1992). “Stresses in a transversely isotropic conical elastic pipe of constant thickness under a thermal load.” J. Appl. Math. Mech., 56(3), 410–415.
Raju, I. S., et al. (1974). “A conical shell finite element.” Comput. Struct., 4(4), 901–915.
Sundarasivarao, B. S. K., et al. (1991). “Deformation of varying thickness of conical shells subjected to axisymmetric loading with various end conditions.” Eng. Fract. Mech., 39(6), 1003–1010.
Suzuki, K., et al. (1982). “Axisymmetric vibrations of a vessel with variable thickness.” Bull. JSME, 25(208), 1591–1600.
Takahashi, S., et al. (1986). “Vibrations of conical shells with variable thickness.” Bull. JSME, 29(258), 4306–4311.
Tavares, S. A. (1999). “Thin conical shells with constant thickness and under axisymmetric load.” Comput. Struct., 60(6), 895–921.
Wylie, C. R. (1979). Differential equations, Chap. 5, McGraw-Hill, New York.
Information & Authors
Information
Published In
Copyright
© 2008 ASCE.
History
Received: Aug 24, 2006
Accepted: Jan 28, 2008
Published online: Aug 1, 2008
Published in print: Aug 2008
Notes
Note. Associate Editor: Bojan B. Guzina
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.