On Mechanical Degradation of Reinforced Concrete Affected by Alkali-Silica Reaction
Publication: Journal of Engineering Mechanics
Volume 134, Issue 8
Abstract
In this paper a constitutive relation is developed for reinforced concrete subjected to a continuing alkali-silica reaction. The chemo-mechanical interaction is described within the framework of chemo-plasticity. The formulation invokes the assumption that the formation of expansive phases results in degradation of mechanical properties of the material. The approach employs a constitutive model for reinforced concrete, as recently developed by the writers. An extensive numerical analysis is conducted examining the effect of the reaction on mechanical characteristics in axial compression/tension for different reinforcement intensities. Some of the key results are compared with the available experimental data.
Get full access to this article
View all available purchase options and get full access to this article.
References
Ahmed, T., Burley, E., and Rigden, S. (1998). “The static and fatigue strength of reinforced concrete beams affected by alkali-silica reaction.” ACI Mater. J., 95, 376–388.
Atkins, P. W. (1994). Physical chemistry, 5th Ed., Oxford University Press, Oxford, U.K.
Bangert, F., Kuhl, D., and Meschke, G. (2004). “Chemo-hygro-mechanical modelling and numerical simulation of concrete deterioration caused by alkali-silica reaction.” Int. J. Numer. Analyt. Meth. Geomech., 28, 689–714.
Bažant, Z. P., and Steffens, A. (2000). “Mathematical model for kinetics of alkali-silica reaction in concrete.” Cem. Concr. Res., 30, 419–428.
Bažant, Z. P., Zi, G., and Meyer, Ch. (2000). “Fracture mechanics of ASR in concretes with waste glass particles of different sizes.” J. Eng. Mech., 126(3), 226–232.
Capra, B., and Bournazel, J.-P. (1998). “Modeling of induced mechanical effects of alkali-aggregate reactions.” Cem. Concr. Res., 28, 251–260.
Capra, B., and Sellier, A. (2003). “Orthotropic modelling of alkali-aggregate reaction in concrete structures: Numerical simulations.” Mech. Mater., 35, 817–830.
Charlwood, R. G., and Solymar, Z. V. (1994). “A review of AAR in dams.” Dam Eng., 5, 31–62.
Clark, L. A. (1991). “Modeling the structural effects of alkali-silica reactions on reinforced concrete.” ACI Mater. J., 88, 271–277.
Comité EuroInternational du Beton (CEB/FIP). (1993). “CEB-FIP model code 90 (final version).” Bull. d’Information No. 213-214, Lausanne, Switzerland.
Fan, S., and Hanson, J. M. (1998a). “Effect of alkali-silica reaction expansion and cracking on structural behavior of reinforced concrete beams.” ACI Struct. J., 95, 498–505.
Fan, S., and Hanson, J. M. (1998b). “Length expansion and cracking of plain and reinforced concrete prisms due to alkali-silica reaction.” ACI Mater. J., 95, 480–487.
Gravel, C. (2001). “Contribution á l’etudé des mécanismes des réactions alkalis-granulats.” Thése de Doctorat, Univ. de Sherbrooke, Quebec.
Hill, R. (1963). “Elastic properties of reinforced solids: Some theoretical properties.” J. Mech. Phys. Solids, 11, 357–372.
Hobbs, D. W. (1978). “Expansion of concrete due to alkali-silica reaction: An explanation.” Mag. Concrete Res., 30(105), 215–220.
Hobbs, D. W. (1981). “The alkali-silica reaction—A model for predicting expansion in mortar.” Mag. Concrete Res., 33(117), 208–220.
Hobbs, D. W. (1988). Alkali-silica reaction in concrete, Thomas Telford, London.
Huang, M., and Pietruszczak, S. (1996). “Numerical analysis of concrete structures subjected to alkali-aggregate reaction.” Mech. Cohesive-Frict. Mater., 1, 305–319.
Huang, M., and Pietruszczak, S. (1999). “Modelling of thermomechanical effects of alkali-silica reaction.” J. Eng. Mech., 125(4), 476–485.
ICAAR. (1996). Proc., 10th Int. Conf. on Alkali-Aggregate Reaction in Concrete, Melbourne, Australia
ICAAR. (2000). Proc., 11th Int. Conf. on Alkali-Aggregate Reaction in Concrete, Quebec.
Jones, A. E. K., and Clark, L. A. (1996). “The effects of restraint on ASR expansion of reinforced concrete.” Mag. Concrete Res., 48(174), 1–13.
Larive, C. (1998). “Apports combinés de l’expérimentation et de la modélisation á la comprehension de l’alcali reaction et de ses effets mécaniques.” Monograph LPC, OA 28, Laboratoires des Ponts et Chaussées, Paris.
Léger, P., Côté, P., and Tinawi, R. (1996). “Finite-element analysis of concrete swelling due to alkali-aggregate reactions in dams.” Comput. Struct., 60(4), 601–611.
Mohammed, T. U., Hamada, H., and Yamaji, T. (2003). “Alkali-silica reaction-induced strains over concrete surface and steel bars in concrete.” ACI Mater. J., 100, 133–142.
Monette, L. J., Gardner, N. J., and Grattan-Bellew, P. E. (2002). “Residual strength of reinforced concrete beams damaged by alkali-silica reaction—Examination of damage rating index method.” ACI Mater. J., 99, 42–50.
Multon, S., Seignol, J.-F., and Toutlemonde, F. (2005). “Structural behavior of concrete beams affected by alkali-silica reaction.” ACI Mater. J., 102, 67–76.
Multon, S., and Toutlemonde, F. (2006). “Effect of applied stresses on alkali-silica reaction-induced expansions.” Cem. Concr. Res., 36, 912–920.
Nielson, A. (1994). “Development of alkali-silica reactions in concrete structures with time.” Cem. Concr. Res., 24, 83–85.
Pietruszczak, S. (1996). “On the mechanical behaviour of concrete subjected to alkali-aggregate reaction.” Comput. Struct., 58(6), 1093–1097.
Pietruszczak, S., and Gocevski, V. (2002). “On rehabilitation of concrete structures affected by alkali-silica reaction.” Int. J. Comp. Civil and Struct. Eng., 1(3), 182–197.
Pietruszczak, S., Jiang, J., and Mirza, F. A. (1988). “An elastoplastic constitutive model for concrete.” Int. J. Solids Struct., 24(7), 705–722.
Pietruszczak, S., and Winnicki, A. (2003). “Constitutive model for concrete with embedded sets of reinforcement.” J. Eng. Mech., 129(7), 725–738.
Pleau, R., Berube, M. A., Pigeon, M., Fournier, B., and Raphael, S. (1989). “Mechanical behaviour of concrete affected by ASR.” Proc., 8th Int. Conf. on Alkali-Aggregate Reaction, Kyoto, Japan, 721–726.
Poole, A. B. (1992). “Introduction to alkali-aggregate reaction in concrete.” The alkali-silica reaction in concrete, R. N. Swamy, ed., Van Nostrand–Reinhold, New York, 8–75.
Saouma, V., and Perotti, L. (2006). “Constitutive model for alkali-aggregate reaction.” ACI Mater. J., 103, 194–202.
Special issue on “Alkali-aggregate reactivity in Canada.” (2000). Can. J. Civ. Eng., 27(2), 167–388.
Steffens, A., Li, K., and Coussy, O. (2003). “Aging approach to water effect on alkali-silica reaction degradation of structures.” J. Eng. Mech., 129(1), 50–59.
Swamy, R. N., and Al-Asali, M. M. (1988). “Engineering properties of concrete affected by alkali-silica reaction.” ACI Mater. J., 85, 367–374.
Swamy, R. N., and Al-Asali, M. M. (1989). “Effect of alkali-silica reaction on the structural behavior of reinforced concrete beams.” ACI Struct. J., 86, 451–459.
Ulm, F.-J., Coussy, O., Li, K., and Larive, C. (2000). “Thermo-chemo-mechanics of ASR expansion in concrete structures.” J. Eng. Mech., 126(3), 233–242.
Wung, C. J., and Dvorak, G. J. (1985). “Strain-space plasticity analysis of fibrous composites.” Int. J. Plast., 1(2), 125–139.
Information & Authors
Information
Published In
Copyright
© 2008 ASCE.
History
Received: Sep 30, 2005
Accepted: Jan 3, 2008
Published online: Aug 1, 2008
Published in print: Aug 2008
Notes
Note. Associate Editor: Christian Hellmich
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.