Coupled Creep and Seepage Model for Hybrid Media
Publication: Journal of Engineering Mechanics
Volume 134, Issue 3
Abstract
The permeability coefficient of a rock mass depends mainly on the aperture of the joint and the porosity of the block, which may alter with time when creep of the rock mass is taken into account. Therefore, a coupled creep and seepage model for hybrid media is proposed in this paper. Large-scale and strongly permeable joints are simulated according to their spatial distributions, while other discontinuities are treated as equivalent continuum. Based on the fundamental mechanism of creep effects on the permeability of the rock mass, together with empirical equations for hydraulic conductivity, coupled creep and seepage equations for filled joints, rough joints, and equivalent continuum are proposed. By application of these equations, governing equations for the coupled creep and seepage model are deduced. A simplified numerical solution is proposed to solve the coupled creep and seepage model. The coupled model is shown to simulate the evolvement of seepage, deformation, and stress field in a gravity dam. By comparing the results derived by coupled and uncoupled models, it is concluded that the coupling between creep and seepage should be taken into account when performing engineering design of large dams.
Get full access to this article
View all available purchase options and get full access to this article.
References
Barenblatt, G. I., Zheltov, I. P., and Kochina, I. N. (1960). “Basic concepts in the theory of seepage of homogeneous liquids in fissured rocks.” J. Appl. Math. Mech., 24(5), 1286–1303.
Barton, N., Bandis, S., and Bakhtar, K. (1985). “Strength deformation and conductivity coupling of rock joints.” Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 22(3), 121–140.
Chai, J., Li, S., and Wu, Q. (2004). “Multilevel fracture network for coupled seepage and stress fields in rock mass.” Commun. Numer. Methods Eng., 20, 63–74.
Fan, G. Q. (1993). Rheological mechanics in rock engineering, Coal Industry Press, Peking (in Chinese).
Jaeger, C. (1963). “The Malpasset report.” Int. Water Power Dam Constr., 15(2), 55–61.
Jiao, Y., and Hudson, J. A. (1995). “The fully coupled model for rock engineering system.” Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 32(5), 491–512.
Lai, D. (2005). “The influence of geological defects on evolution and variation of concrete dams.” Ph.D. dissertation, Hohai Univ., Qinliang Hill, Nanjing, China.
Lai, Y. M., Wu, Z., and Zhu, Y. (1998). “Nonlinear analysis for the coupled problem of temperature seepage and stress fields in cold-region tunnels.” Tunnel. Underground Space Tech., 3(4), 435–440.
Louis, C. (1974). Rock hydraulics in rock mechanics, Elsevier, New York.
Noorishad, J. (1982). “A finite-element method for coupled stress and flow analysis in fractured rock mass.” Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 11(6), 867–868.
Oda, M. (1986). “An equivalent continuum model for coupled stress and fluid flow analysis in jointed rock masses.” Water Resour. Res., 22(13), 1854–1865.
Ohnishi, Y., and Kabayashi, A. (1993). “Thermal–hydraulic–mechanical coupling analysis of rock mass.” Comprehensive rock engineering, Chap. 7, J. A. Hudson, ed., Pergamon, New York, 191–208.
Ohnishi, Y., Shibata, H., and Kabayashi, A. (1985). “Development of finite-element code for analysis of coupled thermohydromechanical behaviors of saturated–unsaturated medium.” Proc., Int. Symp. on Coupled Processes Affecting the Performance of a Nuclear Waste Repository.
Romm, E. S. (1966). Flow characteristics of fractured rocks, Nedra, Moscow.
Ru, N. (1986). “Analysis on right abutment slip of Meishan multiarch dam.” J. Hydraul. Eng., (4), 22–29 (in Chinese).
Shen, Z., Xu, Z., and Luo, C. (2000). “Coupled analysis of viscoelasticity stress field and seepage field of the Three Gorges dam’s foundation.” Chin. J. Eng. Mech., 17(1), 105–113.
Tao, T. (1993). “Characteristics of fluid flow in filled joints.” J. Nanjing Hydraul. Res. Inst., (1), 23–32.
Wu, Y. Q., and Zhang, Z. Y. (1995). An introduction to rock mass hydraulics, Southwest Jiaotong University Press, Chengdu, China (in Chinese).
Information & Authors
Information
Published In
Copyright
© 2008 ASCE.
History
Received: Sep 12, 2005
Accepted: Apr 10, 2007
Published online: Mar 1, 2008
Published in print: Mar 2008
Notes
Note. Associate Editor: Yunping Xi
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.