Extended Transformed Stress Space for Geomaterials and Its Application
Publication: Journal of Engineering Mechanics
Volume 133, Issue 10
Abstract
Because the three-dimensional strength of soil, rock, and concrete is influenced nonlinearly by the hydrostatic pressure and Lode’s angle, the failure surface is irregular in stress space, especially in the large stress range. Based on Lade’s criterion, exponential failure function in coordinate , and the concept of original transformed stress space, an extended transformed stress space and its corresponding transformed stress tensors are proposed in this paper. Compared with original transformed stress space, the extended one would be suitable to the large stress range. Processing test results in extended transformed stress space, the unified stress-strain relationship for a certain geomaterial can be easily obtained from the test results. The validity of extended transformed stress space is confirmed by test results of soil, rock, and concrete. Based on extended transformed stress space and the Modified Cam-Clay Model, a new constitutive model is also proposed in this paper, which can be used to predict three-dimensional stress-strain relationship for soils in the large stress range. The capacity of this model is demonstrated using triaxial test results of Toyoura sand with different stress paths in the large stress range.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This study was supported by National Natural Science Foundation of China, NSFC (Nos. 10672010 and 50479001)
References
Ahadi, A., and Krenk, S. (2000). “Characteristic state plasticity for granular materials. II: Model calibration and results.” Int. J. Solids Struct., 37, 6361–6380.
Colmenares, L. B., and Zoback, M. D. (2002). “A statistical evaluation of intact rock failure criteria constrained by polyaxial test data for five different rocks.” Int. J. Rock Mech. Min. Sci., 39, 695–729.
Guo, Z. H. (1997). Strength and deformation of concrete, Tsinghua University Press, Beijing.
Lade, P. V. (1977). “Elastoplastic stress-strain theory for cohesionless soil with curved yield surface.” Int. J. Solids Struct., 13, 1019–1035.
Lade, P. V., and Duncan, J. M. (1975). “Elastoplastic stress-strain theory for cohesionless soil.” J. Geotech. Engrg. Div., 101(10), 1037–1053.
Lade, P. V., and Kim, M. K. (1995). “Single hardening constitutive model for soil, rock and concrete.” Int. J. Solids Struct., 32(14), 1963–1978.
Lade, P. V., and Musante, H. M. (1978). “Three-dimensional behavior of remolded clay.” J. Geotech. Engrg. Div., 104(2), 193–209.
Launay, P., and Gachon, H. (1970). “Strain and ultimate strength of concrete under triaxial stresses.” ACI Special Publication, SP-34(1), 269–282.
Lee, K. L., and Seed, H. B. (1967). “Drained strength characteristics of sands.” J. Soil Mech. and Found. Div., 93(6), 117–141.
Liu, M. C., et al. (2003). “Large scale triaxial test study on deformation and strength characteristics of rockfill materials.” Chinese J. Rock Mech. and Engrg., Wuhan, 22(7), 1104–1111.
Matsuoka, H., and Nakai, T. (1974). “Stress-deformation and strength characteristics of soil under three different principal stresses.” Proc., JSCE, 232, 59–70.
Matsuoka, H., Yao, Y. P., and Sun, D. A. (1999). “The Cam-Clay model revised by the SMP criterion.” Soils Found., 39(1), 81–95.
Mills, L. L., and Zimmerman, R. M. (1970). “Compressive strength of plain concrete under multiaxial loading conditions.” ACI J., 67(10), 802–807.
Nakai, T. (1989). “An isotropic hardening elastoplastic model for sand considering the stress path dependency in the three-dimensional stress.” Soils Found., 29(1), 119–137.
Schofield, A. N., and Wroth, C. P. (1968). Critical state soil mechanics, McGraw-Hill, London.
Sun, D. A., et al. (2001). “A transformed stress based on extended SMP criterion and its application to elastoplastic model for geomaterials.” Proc., JSCE, 680, 211–224.
Wroth, C. P., and Houlsby, G. T. (1985). “Soil mechanics-property characterization and analysis procedures.” Proc., 11th Int. Conf. on Soil Mechanics, and Foundation Engineering, ISSMFE, Vol. 1, San Francisco, Calif., 1–55.
Yao, Y. P., et al. (2002). “A simple 3-D constitutive model for both clay and sand.” Chinese J. Geotech. Eng., 24(2), 240–246.
Yao, Y. P., Matsuoka, H., and Sun, D. A. (1999). “A unified elastoplastic model for clay and sand with SMP criterion.” Proc., 8th Australia-New Zealand Conf. on Geomechanics, Vol. 2, Hohart, 997–1003.
Yao, Y. P., and Sun, D. A. (2000). “Application of Lade’s criterion to Cam-Clay model.” J. Eng. Mech., 126(1), 112–119.
Yao, Y. P., and Sun, D. A., (2001). “Closure to ‘Application of Lade’s criterion to Cam-Clay model.’” J. Eng. Mech., 127(6), 631–633.
Yao, Y. P., Sun, D. A., and Luo, T., (2004). “A critical state model for sands dependant on stress and density.” Int. J. Numer. Analyt. Meth. Geomech., 28, 323–337.
Information & Authors
Information
Published In
Copyright
© 2007 ASCE.
History
Received: Jan 24, 2006
Accepted: Apr 11, 2007
Published online: Oct 1, 2007
Published in print: Oct 2007
Notes
Note. Associate Editor: Yunping Xi
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.