Numeric-Analytic Form of the Adomian Decomposition Method for Two-Point Boundary Value Problems in Nonlinear Mechanics
Publication: Journal of Engineering Mechanics
Volume 133, Issue 10
Abstract
A new numeric-analytic technique is developed for two-point nonlinear boundary-value problems (BVPs) of engineering interest. The analytic part of the method is based on a conventional Adomian decomposition method (ADM). However, given a discretization of the one-dimensional domain, the present algorithm applies the ADM, repetitively over successive intervals and exploits a shooting algorithm to solve the BVPs. Apart from a very high rate of convergence as the discretization is made finer, yet another significant advantage of the method is that it provides the solution in a piecewise functional form and one can finally arrive at a continuous form of the global solution. The procedure is used to study planar, large-deflection (Elastica) problem of a cantilever beam subjected to a transverse, concentrated load, at its free end. Moreover the elastoplastic behavior of a cantilever is also studied. Comparisons with exact solutions as well as with results via a few other competing algorithms demonstrate the remarkable accuracy of the proposed method.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
D. Roy would like to express his appreciation for the numerical work done by Mr. Anubhab Roy, a summer research trainee, funded by the Jawaharlal Nehru Centre for Advanced Scientific Research, Bangalore, India.
References
Adomian, G. (1994). Solving frontier problems of physics: The decomposition method, Kluwer Academic, Dordrecht, The Netherlands.
Archer, R. R. (1957). “Stability limits for a clamped spherical shell segment under uniform pressure.” Q. Appl. Math., 15, 355–366.
Babolian, E., and Javadi, Sh. (2004). “New method for calculating Adomian polynomials.” Appl. Math. Comput., 153, 253–259.
Biazar, J., Babolian, E., Nouri, A., and Islam, R. (2003). “An alternate algorithm for computing Adomian polynomials in special cases.” Appl. Math. Comput., 138(2–3), 523–529.
Cherrualut, Y. (1989). “Convergence of Adomian’s method.” Kybernetes, 18, 31–38.
Cherrualut, Y., and Adomian, G. (1993). “Decomposition methods: A new proof of convergence.” Math. Comput. Modell., 18(12), 103–106.
Crespo da Silva, M. R. M., Zaretzky, C. L., and Hodges, D. H. (1991). “Effects of approximations on the static and dynamic response of a cantilever with a tip mass.” Int. J. Solids Struct., 27(5), 565–583.
Gabet, L. (1994). “The theoretical foundation of the adomian method.” Comput. Math. Appl., 27 (12), 41–52.
Gao, D. Y. (2000). “Finite deformation beam models and triality theory in dynamical postbuckling analysis.” Int. J. Non-Linear Mech., 35, 103–131.
Ghosh, S., Roy, A., and Roy, D. (2007). “An adaptation of adomian decomposition for numeric-analytic integration of strongly nonlinear and chaotic oscillators.” Comput. Methods Appl. Mech. Eng., 196, 1133–1153.
Horgan, C. O., Saccomandi, G., and Sgura, I. (2002). “A two-point boundary-value problem for the axial shear of hardening isotropic incompressible nonlinearly elastic materials.” SIAM J. Appl. Math., 62(5), 1712–1727.
Irvine, H. M., and Sinclair, G. B. (1976). “The suspended elastic cable under the action of concentrated vertical loads.” Int. J. Solids Struct., 12(4), 309–317.
Jiao, Y. C., Yamaoto, C., Dang, Y., Hao, Y. (2002). “An after treatment technique for improving the accuracy of adomian’s decomposition method.” Comput. Math. Appl., 43, 783–798.
Liu, W. K., Jun, S., and Zhang, Y. F. (1995). “Reproducing kernel particle methods.” Int. J. Numer. Methods Fluids, 20, 1081–1106.
Mattiasson, K. (1981). “Numerical results from large deflection beam and frame problems analyzed by means of elliptic integrals.” Int. J. Numer. Methods Eng., 16, 145–153.
Pai, P. F., and Palazotto, A. N. (1996). “Large-deformation analysis of flexible beams.” Int. J. Solids Struct., 33(9), 1335–1353.
Pollandt, R. (1997). “Solving nonlinear differential equations of mechanics with the boundary element method and radial basis functions.” Int. J. Numer. Methods Eng., 40, 61–73.
Ramachandra, L. S., and Roy, D. (2001). “A new method for nonlinear two-point boundary value problems in solid mechanics.” ASME J. Appl. Mech., 68, 776–786.
Plaut, R. H., Suherman, S., Dillard, D. A., Williams, B. E., and Watson, L. T. (1998). “Deflections and buckling of a bent elastica in contact with a flat surface.” Int. J. Solids Struct., 36(8) 1209–1229.
Roy, D. (2001). “A new numeric-analytical principle for nonlinear deterministic and stochastic dynamical systems.” Proc. R. Soc. London, Ser. A, 457, 539–566.
Schimdt, R., and Da Deppo, D. (1974). “A new approach to the analysis of shells, plates and membranes with finite deflections.” Int. J. Non-Linear Mech., 9, 409–419.
Turvey, G. J. (1978). “Large deflection of tapered annular plates by dynamic relaxation.” J. Engrg. Mech. Div., 104(2), 351–366.
Venkatarangan, S. N., and Rajalakshmi, K. (1995). “A modification of adomian’s solution for nonlinear oscillatory systems.” Comput. Math. Appl., 29(6), 67–73.
Yu, T. X., and Johnson, W. (1982). “The Plastica: The large elastic-plastic deflection of a strut.” Int. J. Non-Linear Mech., 17, 195–209.
Wazwaz, A. M. (2000). “A new algorithm for calculating Adomian polynomials for nonlinear operators.” Appl. Math. Comput., 111, 53–69.
Information & Authors
Information
Published In
Copyright
© 2007 ASCE.
History
Received: Apr 24, 2006
Accepted: Mar 7, 2007
Published online: Oct 1, 2007
Published in print: Oct 2007
Notes
Note. Associate Editor: Arif Masud
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.