Decontamination of Radionuclides from Concrete by Microwave Heating. II: Computations
This article is a reply.
VIEW THE ORIGINAL ARTICLEPublication: Journal of Engineering Mechanics
Volume 129, Issue 7
Abstract
Based on a mathematical model developed in the preceding Part I of this study, a numerical analysis of the process of decontamination of radionuclides from concrete by microwave heating is conducted. The aim is to determine the required microwave power and predict whether and when the contaminated surface layer of concrete spalls off. As customary, the finite element method is used for the stress and fracture analysis. However, as a departure from previous studies, the finite volume method is adopted to treat the heat and moisture transfer, in order to prevent spurious numerical oscillations that plagued the finite element response at moving sharp interface between the saturated and unsaturated concrete, and to deal accurately with the jumps in permeability and in sorption isotherm slope across the interface. The effects of wall thickness, reinforcing bars, microwave frequency, and power are studied numerically. As a byproduct of this analysis, the mechanism of spalling of rapidly heated concrete is clarified.
Get full access to this article
View all available purchase options and get full access to this article.
References
Ahmed, G. N., and Hurst, J. P.(1997). “Coupled heat and mass transport phenomena in siliceous aggregate concrete slabs subjected to fire.” Fire Mater., 21, 161–168.
Bažant, Z. P. (1984). “Microplane model for strain controlled inelastic behavior.” Mechanics of engineering materials, C. S. Desai and R. H. Gallagher, eds., Chap. 3, Wiley, London, 45–59.
Bažant, Z. P. (1997). “Analysis of pore pressure, thermal stress and fracture in rapidly heated concrete.” Proc., Int. Workshop on Fire Performance of High-Strength Concrete, NIST Special Publication 919, L. T. Phan et al., eds., National Institute of Standards and Technology, Gaithersburg, Md., 155–164.
Bažant, Z. P. (2002). Scaling of structural strength, Hermes-Penton, London.
Bažant, Z. P., Caner, F. C., Carol, I., Adley, M. D., and Akers, S. A.(2000). “Microplane model M4 for concrete I: Formulation with work-conjugate deviatoric stress.” J. Eng. Mech., 126(9), 944–953.
Bažant, Z. P., and Kaplan, M. F. (1996). Concrete at high temperatures, Longman, London.
Bažant, Z. P., and Ožbolt, J.(1990). “Nonlocal microplane model for fracture, damage and size effect in structures.” J. Eng. Mech., 116(11), 2484–2504.
Bažant, Z. P., and Ožbolt, J.(1992). “Compression failure of quasi-brittle material: Nonlocal microplane model.” J. Eng. Mech., 118(3), 540–556.
Bažant, Z. P., and Prat, P. C.(1988). “Microplane model for brittle plastic material: I. Theory.” J. Eng. Mech., 114(10), 1672–1688.
Bažant, Z. P., and Thonguthai, W.(1978). “Pore pressure and drying of concrete at high temperature.” J. Eng. Mech. Div., Am. Soc. Civ. Eng., 104(5), 1059–1079.
Bažant, Z. P., and Thonguthai, W.(1979). “Pore pressure in heated concrete walls: Theoretical prediction.” Mag. Concrete Res., 31(107), 67–76.
Bažant, Z. P., Xiang, Y., and Prat, P. C.(1996). “Microplane model for concrete. I. Stress–strain boundaries and finite strain.” J. Eng. Mech., 122(3), 245–254;
IBID123(3), E411–E411.
Bažant, Z. P., and Zi, G.(2003). “Decontamination of radionuclides from concrete by microwave heating. I: Theory.” J. Eng. Mech., 129(7), 777–784.
Caner, F. C., and Bažant, Z. P.(2000). “Microplane model M4 for concrete II: Algorithm and calibration.” J. Eng. Mech., 126(9), 954–961.
Carol, I., and Bažant, Z. P.(1997). “Damage and plasticity in microplane theory.” Int. J. Solids Struct., 34(29), 3807–3835.
Carol, I., Bažant, Z. P., and Prat, P. C.(1991). “Geometric damage tensor based on microplane model.” J. Eng. Mech., 117(10), 2429–2448.
Celia, M. A., Bouloutas, E. T., and Zarba, R. L.(1990). “A general mass-conservative numerical solution for the unsaturated flow equation.” Water Resour. Res., 26(7), 1483–1496.
Cheng, D. K. (1983). Field and wave electromagnetics, Addison–Wesley, London.
Eymard, R., Gallouët, T., and Herbin, R. (2000). “The fine volume methods.” Handbook of numerical analysis, P. G. Ciarbet and J. L. Lions, eds., North Holland, Amsterdam.
Eymard, R., Gallouët, T., Hilhorst, D., and Slimane, Y. N.(1998). “Finite volumes and nonlinear diffusion equations.” RAIRO-Mathematical Modelling and Numerical Analysis—Modélisation Mathématique et Analyse Numérique, 32(6), 747–761.
Harmathy, T. Z. (1965). “Effect of moisture on the fire endurance of building materials.” Moisture in Materials in Relation to Fire Tests. ASTM Special Technical Publication No. 385, American Society of Testing Materials, Philadelphia, 74–95.
Harmathy, T. Z.(1970). “Thermal properties of concrete at elevated temperatures.” J. Mater., 5(1), 47–74.
Harmathy, T. Z., and Allen, L. W.(1973). “Thermal properties of selected masonry unit concrete.” ACI J., 70(2), 132–142.
Jansen, D. C., and Shah, S. P.(1997). “Effect of length on compressive strain softening of concrete.” J. Eng. Mech., 123(1), 25–35.
Jirásek, M., and Bažant, Z. P. (2002). Inelastic analysis of structures, Vol. 735, Wiley, London.
Kraus, J. D. (1988). Antennas, MacGraw–Hill, New York.
Lagos, L. E., Li, W., and Ebadian, M. A.(1995). “Heat transfer within a concrete slab with a finite microwave heating source.” Int. J. Heat Mass Transf., 38(5), 887–897.
Li, W., Ebadian, M. A., White, T. L., and Grubb, R. G.(1993). “Heat transfer within a concrete slab applying the microwave decontamination process.” J. Heat Transf., 115, 42–50.
Mainguy, M., and Coussy, O.(2000). “Propagation fronts during calcium leaching and chloride penetration.” J. Eng. Mech., 126(3), 250–257.
Mainguy, M., Coussy, O., and Baroghel-Bouny, V.(2001a). “Role of air pressure in drying of weakly permeable materials.” J. Eng. Mech., 127(6), 582–592.
Mainguy, M., Ulm, F.-J., and Heukamp, F. H.(2001b). “Similarity properties of demineralization and degration of cracked porous materials.” Int. J. Solids Struct., 38, 7079–7100.
Ožbolt, J., and Bažant, Z. P.(1996). “Numerical smeared fracture analysis: Nonlocal microcrack interaction approach.” Int. J. Numer. Methods Eng., 39, 635–661.
Patankar, S. V. (1980). Numerical heat transfer and fluid mechanics, McGraw–Hill, New York.
Ulm, F.-J., Coussy, O., and Bažant, Z. P.(1999). “The “Chunnel” fire. I: Chemoplastic softening in rapidly heated concrete.” J. Eng. Mech., 125(3), 272–282.
White, T. L., Foster, D., Jr., Wilson, C. T., and Schaich, C. R. (1995). “Phase II microwave concrete decontamination results,” ORNL Rep. No. DE-AC05-84OR21400, Oak Ridge National Laboratory, Oak Ridge, Tenn.
Information & Authors
Information
Published In
Copyright
Copyright © 2003 American Society of Civil Engineers.
History
Received: Mar 12, 2002
Accepted: Oct 29, 2002
Published online: Jun 13, 2003
Published in print: Jul 2003
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.