Acoustic Emission Source Location Using Lamb Wave Modes
Publication: Journal of Engineering Mechanics
Volume 123, Issue 2
Abstract
This paper describes the development of a technique based on acoustic emission (AE) technology that can be used for global nondestructive evaluation (NDE) of steel structures. This will also be useful for the subsequent local inspection used to further monitor cracking, defective connections, retrofit measures, and so forth. The dispersive nature of Lamb wave propagation in plates makes it possible to perform a linear source location of AE events based on the arrival of different frequency components (Lamb wave modes) of an AE event at a single transducer. Experiments on steel beams and plates in the laboratory explored the theory of wave propagation and digital signal processing needed to pursue this objective. Subsequent field investigation on a real bridge substantiated the applicability of this technique. This new technique could allow AE inspection to locate structural problems better, and with a reduced number of transducers.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bray, D. E., and Stanley, R. K. (1989). Nondestructive evaluation. McGraw-Hill Book Co., Inc., New York, N.Y.
2.
Carlyle, J. M. (1993a). “Acoustic emission monitoring of the I-10 Mississippi River bridge.”Rep. Prepared for U.S. Dept. of Transp., Fed. Hwy. Admin., Washington, D.C.
3.
Carlyle, J. M. (1993b). “Acoustic emission monitoring of the I-205 Willamette River bridge.”Rep. Prepared for U.S. Dept. of Transp., Fed. Hwy. Admin., Washington, D.C.
4.
Chase, S. (1995). “Bridges and highways.”SPIE Proc., Conf. on NDE of Aging Infrastructure, SPIE, Int. Soc. for Optical Engrs., Bellingham, Wash., 2456.
5.
Chen, H. L., Cheng, C. T., and Chen, S. E.(1992). “Determination of fracture parameters of mortar and concrete beams by using acoustic emission.”Mat. Evaluation, 50(7), 888–894.
6.
Doyle, J. F.(1987). “An experimental method for determining the location and time of initiation of an unknown dispersing pulse.”Experimental Mech., 27(3), 229–233.
7.
Egle, D. M., and Brown, A. E.(1975). “Consideration for the detection of acoustic emission waves in thin plates.”J. Acoustic Soc. of Am., 53, 591–597.
8.
Gong, Z., Nyborg, E. O., and Oommen, G.(1992). “Acoustic emission monitoring of steel railroad bridges.”Mat. Evaluation, 50(7), 883–887.
9.
Hartbower, P. E., and Stolarski, P. J., eds. (1996). Structural materials technology, an NDT conference. Technomic Publishing Co., Lancaster, Pa., 1–385.
10.
Jacobs, L. J. (1994). “Laser generation and detection of ultrasound in concrete.”Proc., ASCE Struct. Congr. XII, Baker and Goodno, eds., ASCE, New York, N.Y., 1328–1333. LabView for Windows—user's manual . (1993). National Instruments.
11.
Lamb, H. (1917). “On waves in an elastic plate.”Proc., Royal Soc. of London, Ser. A, 93, Royal Soc. of London, 114–128.
12.
Landis, E. N., and Shah, S. P.(1993). “Recovery of microcrack parameters in mortar using quantitative acoustic emission.”J. NDE, 12(4), 219–232.
13.
Maji, A. K., and Kratochvil, T. (1994). “Acoustic emissions, possibilities for monitoring bridges.” Scancella and Callahan, eds., Proc., Struct. Mat. Technol., NDT Conf., Technomic Publishing Co., Lancaster, Pa., 124–130.
14.
“Materials evaluation—special issue on acoustic emission.” (1992). 50(7), 826–894.
15.
Miller, R. K., and McIntire, P., eds. (1987). Nondestructive testing handbook, vol. 5—acoustic emission testing. ASNT, Columbus, Ohio.
16.
Pao, Y. H. (1978). Theory of acoustic emission, elastic waves and nondestructive testing of materials, 29. Y. H. Pao, ed., ASME, AMD, New York, N.Y.
17.
Prine, D. (1996). “Application of acoustic emission, strain gage, and optical sensors to moveable bridges.”Structural materials technology, an NDT conference, P. E. Hartbower and P. J. Stolarski, eds., Technomic Publishing Co., Lancaster, Pa., 329–334.
18.
Scancella, R. J., and Callahan, M. E., eds. (1994). Structural materials technology, an NDT conference. Technomic Publishing Co., Lancaster, Pa.
19.
Schwartz, M., and Shaw, L. (1975). Signal processing: discrete spectral analysis, detection and estimation. McGraw-Hill Book Co., Inc., New York, N.Y.
20.
Silano, L. G., ed. (1992). Bridge inspection and rehabilitation—a practical guide. Wiley-Interscience Publications, New York, N.Y.
21.
Suprenant, B., ed. (1990). “NDE of civil structures and materials.”Proc., Int. Conf., Univ. of Colorado Press, Boulder, Colo., 1–406.
22.
Ziola, S. M., and Gorman, M.(1991). “Source location in thin plates using cross-correlation.”J. Acoustic Soc. of Am., 90(5), 2551–2556.
Information & Authors
Information
Published In
Copyright
Copyright © 1997 American Society of Civil Engineers.
History
Published online: Feb 1, 1997
Published in print: Feb 1997
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.