Size Effect in Compression Fracture: Splitting Crack Band Propagation
Publication: Journal of Engineering Mechanics
Volume 123, Issue 2
Abstract
A simplified fracture-mechanics-based model of compression failure of centrically or eccentrically loaded quasi-brittle columns is presented and the size effect on the nominal strength of a column is predicted. Failure is modeled as propagation of a band of axial splitting cracks in a direction orthogonal or inclined with respect to the column axis. The maximum load is calculated from the condition that the energy released from the column due to crack band advance be equal to the energy consumed by the splitting cracks. The axial stress transmitted across the crack band is determined as the critical stress for buckling of the microslabs of material between the axial splitting cracks, and the work on the microslabs during postbuckling deflections is taken into account. The critical postbuckling deflection of the microslabs is determined from a compatibility condition. Under the assumption of small enough material inhomogeneities, the spacing s of the splitting cracks is calculated by minimizing the failure load and is found to decrease with structure size D as D−1/5. The size effect on the nominal strength of geometrically similar columns is found to disappear asymptotically for small sizes D, and to asymptotically approach the power law D−2/5 for large sizes D (where D= cross section dimension). However, when the material inhomogeneities are so large that they preclude the decrease of s with increasing D, the asymptotic size effect changes to D−1/2. The size effect intensifies with increasing slenderness of the column, which is explained by the fact that a more slender column stores more strain energy. The predicted size effect describes quite well previous tests at Northwestern University of reduced-scale tied reinforced concrete columns of different sizes (with size range 1:4) and different slenderness (ranging from 19 to 53). Finally, a simple modification is pointed out for the case of shear loading of concrete, in which a system of parallel tensile cracks in the diagonal compression direction develops before the maximum compressive stress is reached.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Ashby, M. F., and Hallam, S. D.(1986). “The failure of brittle solids containing small cracks under compressive stress states.”Acta Metall. Mat., 34(3), 497–510.
2.
Batto, R. A., and Schulson, E. M.(1993). “On the ductile-to-brittle transition in ice under compression.”Acta Metall. Mat., 41(7), 2219–2225.
3.
Bažant, Z. P. (1967). “Stability of continuum and compression strength.”Bull. RILEM, 39, 99–112, Paris (in French).
4.
Bažant, Z. P. (1968). “Effect of folding of reinforcing fibers on the elastic moduli and strength of composite materials.”Mekhanika Polimerov, 4, 314–321, Riga (in Russian).
5.
Bažant, Z. P. (1994). “Size effect in tensile and compressive quasibrittle failures.”Size effect in concrete structures, Proc., Japan Concrete Inst. Int. Workshop, Tohoku Univ., Sendai, Japan, H. Mihashi, H. Okamura, and Z. P. Bažant, eds., FN Spon, London, 161–180.
6.
Bažant, Z. P. (1996). “Fracturing truss model: explanation of size effect mechanism in shear failure of reinforced concrete.”Rep. 96-3/603f, Dept. of Civ. Engrg., Northwestern Univ., Evanston, Ill. [J. Engrg. Mech., ASCE, 123(2)].
7.
Bažant, Z. P., and Cedolin, L. (1991). Stability of structures: elastic, inelastic, fracture and damage theories. Oxford University Press, New York, N.Y.
8.
Bažant, Z. P., and Kwon, Y. W. (1994). “Failure of slender and stocky reinforced concrete columns: tests of size effect.”Mat. and Struct., 27, 79–90, Paris.
9.
Bažant, Z. P., Lin, F.-B., and Lippmann, H.(1993). “Fracture energy release and size effect in borehole breakout.”Int. J. Num. and Anal. Methods in Geomech., 17, 1–14.
10.
Bažant, Z. P., and Ožbolt, J.(1992). “Compression failure of quasibrittle material: nonlocal microplane model.”J. Engrg. Mech., ASCE, 118(3), 540–556.
11.
Bažant, Z. P., and Xiang, Y. (1994). “Compression failure of quasibrittle materials and size effect.”AMD Symp. Ser. ASME Appl. Mech. Div., 185, Damage mechanics in composites, ASME Winter Annual Meeting, Chicago, D. H. Allen and J. W. Ju, eds., 143–148.
12.
Bieniawski, Z. T.(1974). “Estimating the strength of rock materials.”J. S. Afr. Inst. Min. Metal, 74, 312–320.
13.
Biot, M. A. (1965). Mechanics of incremental deformations. John Wiley & Sons, Inc., New York, N.Y.
14.
Blanks, R. F., and McNamara, C. C.(1935). “Mass concrete tests in large cylinders.”J. Am. Concrete Inst., 31, 280–303.
15.
Carter, B. C.(1992). “Size and stress gradient effects on fracture around cavities.”Rock Mech. and Rock Engrg., 25(3), 167–186.
16.
Carter, B. C., Lajtai, E. Z., and Yuan, Y.(1992). “Tensile fracture from circular cavities loaded in compression.”Int. J. Fracture, 57, 221–236.
17.
Cotterell, B.(1972). “Brittle fracture in compression.”Int. J. Fracture Mech., 8(2), 195–208.
18.
Cotterell, B., and Rice, J. R.(1980). “Slightly curved or kinked cracks.”Int. J. Fracture, 16, 155–169.
19.
Droz, P., and Bažant, Z. P. (1989). “Nonlocal analysis of stable states and stable paths of propagation of damage shear bands.”Cracking and damage, Proc., France-U.S. Workshop, Cachan, France, J. Mazars and Z. P. Bažant, eds., Elsevier, London, 183–207.
20.
Fairhurst, C., and Cornet, F. (1981). “Rock fracture and fragmentation.”Rock mechanics: from research to application. Proc., 22nd U.S. Symp. on Rock Mech., H. H. Einstein, ed., MIT Press, Cambridge, Mass., 21–46.
21.
Gonnermann, H. F.(1925). “Effect of size and shape of test specimen on compressive strength of concrete.”Proc., ASTM, ASTM, Philadelphia, Pa., 25, 237–250.
22.
Haimson, B. C., and Herrick, C. G. (1985). “In-site stress calculation from borehole breakout experimental studies.”Research and engineering applications in rock masses. Proc., 26th U.S. Symp. on Rock Mech., E. Ashworth, ed., A. A. Balkema, Rotterdam, The Netherlands, 1207–1218.
23.
Hoek, E., and Bieniawski, Z. J.(1965). “Brittle fracture propagation in rock under compression.”Int. J. Fracture Mech., 1, 137–155.
24.
Horii, H., and Nemat-Nasser, S.(1982). “Compression-induced nonplanar crack extension with application to splitting, exfoliation and rockburst.”J. Geophys. Res., 87, 6806–6821.
25.
Horii, H., and Nemat-Nasser, S.(1986). “Brittle failure in compression, splitting, faulting and brittle-ductile transition.”Phil. Trans. Royal Soc., Royal Society, London, 319(1549), 337–374.
26.
Hsu, T. T. C.(1985). “Softened truss model theory for shear and torsion.”ACI Struct. J., 85(6), 624–635.
27.
Hsu, T. T. C. (1993). Unified theory of reinforced concrete. CRC Press, Inc., Boca Raton, Fla.
28.
Ingraffea, A. R. (1977). “Discrete fracture propagation in rock: laboratory tests and finite element analysis,” PhD dissertation, Univ. of Colorado, Boulder.
29.
Ingraffea, A. R., and Heuzé, F. E.(1980). “Finite element models for rock fracture mechanics.”Int. J. Numer. and Anal. Meth. in Geomech., 4, 25.
30.
Jishan, X., and Xixi, H.(1990). “Size effect on the strength of a concrete member.”Engrg. Fracture Mech., 35, 687–696.
31.
Kachanov, M.(1982). “A microcrack model of rock inelasticity—part I. Frictional sliding on microcracks.”Mech. of Mat., 1, 19–41.
32.
Kemeny, J. M., and Cook, N. G. W.(1987). “Crack models for the failure of rock under compression.”Proc., 2nd Int. Conf. on Constitutive Laws for Engrg. Mat., C. S. Desai et al., eds., Elsevier Science Publishing Co., Inc., New York, N.Y., 2, 879–887.
33.
Kemeny, J. M., and Cook, N. G. W. (1991). “Micromechanics of deformation in rock.”Toughening mechanisms in quasibrittle materials, S. P. Shah et al., eds., Kluwer, Dordrecht, The Netherlands, 155–188.
34.
Kendall, K. (1978). “Complexities of compression failure.”Proc., Royal Soc., Royal Society, London, A(361), 245–263.
35.
Marti, P.(1989). “Size effect on double punch tests on concrete cylinders.”ACI Mat. J., 86(6), 597–601.
36.
Murakami, Y. (1987). Stress intensity factors handbook. Pergamon Press, Inc., Tarrytown, N.Y.
37.
Nemat-Nasser, S., and Obata, M.(1988). “A microcrack model of dilatancy in brittle material.”ASME J. Appl. Mech., 55, 24–35.
38.
Nesetova, V., and Lajtai, E. Z.(1973). “Fracture from compressive stress concentration around elastic flaws.”Int. J. Rock Mech. and Min. Sci., 10, 265–284.
39.
Palmer, A. C., and Sanderson, T. J. O. (1991). “Fractal crushing of ice and brittle solids.”Proc., Royal Soc., Royal Society, London, A(443), 469–477.
40.
Paul, B. (1968). “Macroscopic criteria for plastic flow and brittle fracture.”Fracture, an advanced treatise, H. Liebowitz, ed., 2, chapter 4.
41.
Sammis, C. G., and Ashby, M. F.(1986). “The failure of brittle porous solids under compressive stress state.”Acta Metall. Mat., 34(3), 511–526.
42.
Schulson, E. M., and Nickolayev, O. Y. (1995). “Failure of columnar saline ice under biaxial compression: failure envelopes and the brittle-to-ductile transition.”J. Geophys. Res., 100(B11), 22383–22400.
43.
Shetty, D. K., Rosenfield, A. R., and Duckworth, W. H.(1986). “Mixed mode fracture of ceramics in diametrical compression.”J. Am. Ceram. Soc., 69(6), 437–443.
44.
Steif, P. S.(1984). “Crack extension under compressive loading.”Engrg. Frac. Mech., 20, 463–473.
45.
Tada, H., Paris, P. C., and Irwin, G. R. (1985). The stress analysis of cracks handbook, 2nd Ed., Paris Productions, Inc., St. Louis, Mo.
46.
van Mier, J. G. M. (1986). “Multiaxial strain-softening of concrete.”Mat. and Struct., 19, 179–200, Paris.
47.
Wittmann, F. H., and Zaitsev, Y. V. (1981). “Crack propagation and fracture of composite materials such as concrete.”Proc., 5th Int. Conf. on Fracture (ICF5).
48.
Yuan, Y. Y., Lajtai, E. Z., and Ayari, M. L.(1993). “Fracture nucleation from a compression-parallel finite-width elliptical flaw.”Int. J. Rock Mech. and Min. Sci., 30(7), 873–876.
49.
Zaitsev, Y. V. (1985). “Inelastic properties of solids with random cracks.”Mechanics of geomaterials, Z. P. Bažant, ed., John Wiley & Sons, Inc., New York, N.Y., 89–128.
50.
Zaitsev, Y. V., and Wittmann, F. H. (1981). “Simulation of crack propagation and failure of concrete.”Mat. and Struct., 14, 357–365, Paris.
Information & Authors
Information
Published In
Journal of Engineering Mechanics
Volume 123 • Issue 2 • February 1997
Pages: 162 - 172
Copyright
Copyright © 1997 American Society of Civil Engineers.
History
Published online: Feb 1, 1997
Published in print: Feb 1997
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.