Biaxial Properties of Structural Steel under Nonproportional Loading
Publication: Journal of Engineering Mechanics
Volume 112, Issue 8
Abstract
Most research studies on inelastic material behavior of steel structures under earthquake ground motions are concentrated on general uniaxial cyclic loading conditions. Very limited attention has been given to the responses of structures subjected to multiaxial and nonproportional loading conditions. This study is concerned with the observations of experimental behaviors of structural steel subjected to biaxial nonproportional loading conditions. Six annealed A‐36 steel tubular specimens were tested under constant strain rate and room temperature using an MTS axial‐torsional testing system under prescribed strain paths. Results of three of the six tests are reported in this paper (the other three are primarily duplicates). Four important observations on the material characteristics are described and discussed. They are the initial plastic plateaus of structural steel under biaxial loading, the hardening behavior under multiaxial cyclic and nonproportional loading, the material memorial characteristics, and the effect of nonproportional loading.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Chang, K. C., “Behavior of Structural Steels Under Cyclic and Nonproportional Loading,” thesis submitted to the Faculty of the Graduate School of the State University of New York at Buffalo in partial fulfillment of the requirements for the Degree of Doctor of Philosophy, Feb., 1985.
2.
Cofie, N. G., “Cyclic Stress‐Strain and Moment‐Curvature Relationships for Steel Beams and Columns,” thesis submitted to the Department of Civil Engineering and the Committee of Graduate Studies of Stanford University in partial fulfillment of the requirement of the Degree of Doctor of Philosophy, June, 1983.
3.
Dafalias, Y. E., and Popov, E. P., “Plastic Internal Variables Formalism in Cyclic Plasticity,” J. Appl. Mech., Vol. 98, 1976, pp. 645–651.
4.
Hecker, S. S., “Experimental Studies of Yield Phenomena in Biaxial Loaded Metals,” Constitutive Equations in Viscoplasticity, AMD. Vol. 20, Dec., 1967, pp. 1–33.
5.
Krempl, E., “Cyclic Plasticity—Some Properties of The Hysteresis Curve of Structural Metals at Room Temperature,” Journal of Basic Engineering, Transactions, ASME, Vol. 93D, 1971, pp. 317–323.
6.
Lamba, H. S., “Axial and Torsional Cyclic Stress‐Strain Behavior,” thesis submitted to the Department of Theoretical and Applied Mechanics, University of Illinois, Illinois, Urbana, Ill., in 1974, in partial fulfillment of the requirements for the degree of Master of Science.
7.
Lamba, H. S., and Sidebottom, O. S., “Cyclic Plasticity for Nonproportional Paths: Part 1—Cyclic Hardening, Erasure of Memory, and Subsequent Strain Hardening Experiments,” Journal of Engineering Materials and Technology, Vol. 100, Jan., 1978, pp. 96–103.
8.
Liu, K. C., “Experimental Studies to Examine Elastic‐Plastic Behaviors of Metal Alloys Used in Nuclear Structures,” Constitutive Equations in Viscoplasticity, AMD., Vol. 20, Dec., 1976, pp. 35–56.
9.
Morrow, J. D., “Cyclic Plastic Strain Energy and Fatigue of Metals,” ASTM, STP No. 378, 1965.
10.
Mroz, A., “An Attempt to Describe the Behavior of Metals under Cyclic Loads Using a More General Work‐Hardening Model,” ACTA MECH., Vol. 17, 1969, pp. 199–212.
11.
Popov, E. P., and Petersson, H., “Cyclic Metal Plasticity: Experiments and Theory,” J. Eng. Mech. Div., ASCE, Vol. 104, No. EM6, Dec., 1978, pp. 1371–1388.
12.
Tseng, N. T., and Lee, G. C., “Simple Plasticity Model of Two‐Surface Type,” J. Eng. Mech., Vol. 109, No. 3, June, 1983, pp. 795–810.
Information & Authors
Information
Published In
Copyright
Copyright © 1986 ASCE.
History
Published online: Aug 1, 1986
Published in print: Aug 1986
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.