Shape Optimization of a Solid of Revolution
Publication: Journal of Engineering Mechanics
Volume 109, Issue 1
Abstract
Shape optimal design of an elastic solid of revolution under multiple constraints is treated. As a specific example, a device that seals a gun bore and transmits high in‐bore pressure to shear loading on the projectile, is considered. The design objective is minimum weight, with constraints on stress throughout the body, tractions on one surface of the boundary, and dimensions of the body. Methods of the calculus of variations and functional analysis are used to transform the variation of a functional over a variable region as a functional over a fixed region. An adjoint variable method of operator theory is then used to reduce this variation to an explicit function of only design variations. The resulting sensitivity coefficients are used in an iterative optimization algorithm. Numerical results are presented and show that the algorithm is stable and efficient.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bhavikatti, S. S., and Ramakrishnan, C. V., “Optimum Design of Fillets in Flat and Round Torsion Bars,” Journal of Design Engineering Division, ASME, Paper No. 77‐DET‐45, 1977.
2.
Bryson, A. E., Jr., and Ho, Y. C., Applied Optimal Control, Ginn and Co., Waltham, Mass., 1969.
3.
Chun, Y. W., and Haug, E. J., “Two‐Dimensional Optimal Design,” Technical Report No. 38, Division of Materials Engineering, University of Iowa, Iowa City, Iowa, Jan., 1978.
4.
Chun, Y. W., and Haug, E. J., “Two‐Dimensional Shape Optimal Design,” International Journal for Numerical Methods in Engineering, Vol. 13, No. 2, 1978, pp. 311–336.
5.
Coberly, R., “Interior Ballistics,” Technical Notes 9310‐TS, Rock Island Arsenal, Rock Island, Ill., 1954.
6.
Francavilla, A., Ramakrishnan, C. V., and Zienkiewicz, O. C., “Optimization of Shape to Minimize Stress Concentration,” Journal of Strain Analysis, Vol. 10, No. 2, 1975, pp. 63–70.
7.
Haug, E. J., Jr., “Engineering Design Handbook: Computer Aided Design of Mechanical Systems,” Vol. 1, AMC Pamphlet No. 706‐192, U.S. Army Materiel Command, Washington, D.C., July, 1973.
8.
Haug, E. J., and Arora, J. S., Applied Optimal Design, Wiley‐Interscience, New York, N.Y., 1979.
9.
Haug, E. J., Jr., and Arora, J. S., “Computer Aided Design of Mechanical Systems,” Engineering Design Handbook, Vol. 2, AMCP 706‐193, U.S. Army Materiel Command, Washington, D.C., 1977.
10.
Haug, E. J., Jr., Arora, J. S., and Matsui, K., “A Steepest Descent Method for Optimization Theory of Mechanical Systems,” Journal of Optimization Theory and Application, Vol. 19, No. 3, 1976, pp. 401–424.
11.
Kristensen, E. S., and Madsen, N. F., “On the Optimum Shape of Fillets in Plates Subjected to Multiple In‐Plane Loading Cases,” International Journal for Numerical Methods in Engineering, Vol. 10, 1976, pp. 1007–1019.
12.
Ramakrishnan, C. V., and Francavilla, A., “Structural Shape Optimization Using Penalty Functions,” Journal of Structural Mechanics, Vol. 3, No. 4, 1974–75, pp. 403–422.
13.
Timoshenko, S. P., and Goodier, J. N., Theory of Elasticity, 3rd ed., McGraw‐Hill Book Co., Inc., New York, N.Y., 1970.
14.
Tvergaard, V., “On the Optimum Shape of a Fillet in a Flat Bar with Restrictions,” Optimization in Structural Design, A. Sawcyuk and Z. Mroz, eds., IUTAM Symposium, Springer‐Verlag, 1975, pp. 181–195.
Information & Authors
Information
Published In
Copyright
Copyright © 1983 ASCE.
History
Published online: Feb 1, 1983
Published in print: Feb 1983
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.