Applicability of Equilibrium Isotherm Models for the Biosorptive Uptakes in Comparison to Activated Carbon-Based Adsorption
Publication: Journal of Environmental Engineering
Volume 132, Issue 12
Abstract
The adsorption isotherm models available in the literature have generally developed for sorption onto metallic surfaces or activated carbon-based sorbents. However, biosorptive uptakes involve interactions of biopolymer-based surfaces with different types of pollutants, which are quite different from metal surfaces or activated carbon. So, in the present study, 16 different types of adsorption isotherm models have been studied. For a ready reference both types of sorbents, i.e., a biosorbent and activated carbon have been employed. Results show that in general the accuracy of models to fit experimental data improves with the degree of freedom. The Fritz–Schluender model gives the most accurate fit to all experimental data in comparison to other models used both for activated carbon and the biosorbent. However, most widely used isotherm models, i.e., Langmuir and Freundlich, could be used to describe the sorption equilibrium of biosorptive processes with a fair degree of accuracy, owing to the mathematical ease in the use of these models. Trends of the applicability of various sorption equilibrium models to biosorptive uptakes are similar to those of activated carbon-based sorptions. Comprehensive equilibrium analysis has assisted in understanding the mechanistic aspects associated with different types of sorbents.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers are thankful to Dr. Peter Cornel, Institut WAR, Technische Universität Darmstadt, Germany, for his untiring attention in the experimental part of the study and constant encouragement throughout this project work. The writers are also thankful to the Germany Academic Exchange Service (DAAD) for financial support for carrying out part of the work.
References
Ahmad, S., Khalid, N., and Daud, M. (2002). “Adsorption studies of lead on lateritic minerals from aqueous media.” Sep. Sci. Technol., 37(2), 343–362.
Allen, S. J., McKay, G., and Khader, K. Y. H. (1988). “Multicomponent sorption isotherms of basic dyes onto peat.” Environ. Pollut., 52(1), 39–53.
Annadurai, G., Juang, R. S., and Lee, D. J. (2002). “Use of cellulose-based wastes for adsorption of dyes from aqueous solutions.” J. Hazard. Mater., 92(3), 263–274.
Banat, F., Al-Asheh, S., and Mohai, F. (2000). “Multimetal sorption by spent animal bones.” Sep. Sci. Technol., 37(2), 311–327.
Brunauer, S., Emmet, P. H., and Teller, E. (1938). “Adsorption of gases in multimolecular layers.” J. Am. Chem. Soc., 60(2), 309–319.
Chen, S. G., and Yang, R. T. (1994). “Theoretical basis for potential theory adsorption isotherms: The Dubinin–Radushkevich and Dubinin–Astakho equations.” Langmuir, 10(9), 4244–4249.
Choma, J., Mortka, W. B., Jaroniec, M., and Gilpin, R. K. (1933). “Studies of the structural heterogeneity of microporous carbon using liquid/solid adsorption isotherms.” Langmuir, 9, 2555–2561.
Choy, K. H. K., McKay, G., and Porter, J. F. (1999). “Adsorption of acid dyes from effluents using activated carbon.” Resour. Conserv. Recycl., 27(1-2), 57–71.
Cooney, D. O. (1999). Adsorption design for wastewater treatment, CRC, Boca Raton, Fla., 39–62.
Doong, S. J., and Yang, R. T. (1986). “Bulk separation of multicomponent of gas mixture by pressure swing adsorption: Pore surface diffusion and equilibrium models.” J. Am. Inst. Chem. Eng., 32(3), 397–410.
Dubinin, M. M., and Radushkevich, L. V. (1947). “Equation of the characteristic curve of activated charcoal.” Chem. Zentr., I, 875.
Faust, S. D., and Aly, O. M. (1987). Adsorption processes for water treatment, Butterworth, Stoneham, Mass., 1–23.
Freundlich, H., (1926). Colloidal and capillary chemistry, Methuen, London.
Fritz, W., and Schluender, E. U. (1974). “Simultaneous adsorption equilibria of organic solutes in dilute aqueous solution on activated carbon.” Ceram. Eng. Sci. Proc., 29(5), 1279–1282.
Fu, Y., and Viraraghavan, T. (1999). “Removal of Acid Blue 29 from an aqueous solution by fungus A. niger.” Proc., 31st Mid-Atlantic Hazardous and Industrial Wastes Conf., N. Nikolaidis, C. Erkey, and B. Smets, eds., Technomic, Lancaster, Pa., 510–514.
Fu, Y., and Viraraghavan, T. (2000). “Removal of a dye from and aqueous solution by the fungus Aspergillus niger.” Water Qual. Res. J. Canada, 35(1), 95–111.
Gadd, G. M., Eccles, H., and Hunt, S. (1986). “The uptake of heavy metals by fungi yeasts: The chemistry and physiology of the process and application for biotechnology.” Immobilization of ions by biosorption, Harwood, Chichester, U.K., 135–147.
Hall, C., Wales, D. S., and Keane, M. A. (2001). “Copper removal from aqueous systems: Biosorption by pseudomonas syringes.” Sep. Sci. Technol., 36(2), 223–240.
Ho, Y. S., and McKay, G. (1998). “Sorption of dye from aqueous solution by peat.” Chem. Eng. J., 70(2), 115–124.
Huang, Y. H., Johnson, J. W., Liapis, A. I., and Crosser, O. K. (1994). “Experimental determination of the binary equilibrium adsorption and desorption of propane–propylene mixtures on molecular sieves by a differential sorption bed system and investigation of their equilibrium expressions.” Sep. Sci. Technol., 4(7), 156–165.
Ismadji, S., and Bhatia, S. K. (2000). “Adsorption of flavor esters on granular activated carbon.” Can. J. Chem. Eng., 78(5), 892–901.
Johnson, R. D., and Arnold, F. H. (1995). “The Temkin isotherm describes heterogeneous protein adsorption.” Biochem. Biophys. Acta, 1247(2), 293–297.
Jossens, L., Prausnitz, J. M., Fritz, W., Schluender, E. U. and Myers, A. (1978). “Thermodynamics of multisolute adsorption from dilute aqueous solutions.” Chem. Eng. Sci., 33(8), 1097–1106.
Kuyucak, N., and Volesky, B. (1988). “A method of metal removal.” Water Poll. Res. J. Canada, 23(3), 424–433.
Langmuir, I. (1918). “The adsorption of gases on plane surfaces of glass, mica, and platinum.” J. Am. Chem. Soc., 40, 1361–1382.
Lee, S. H., Song, D. L., and Jeon, Y. W. (2001). “An investigation of the adsorption of organic dyes onto organo montmorillonite.” Environ. Technol., 22(3), 247–254.
Malek, A., and Farooq, S. (1996). “Comparison of isotherm models for hydrocarbon adsorption on activated carbon.” AIChE J., 42(11) 3191–3201.
Mall, D., and Upadhyay, S. N. (1995). “Removal of basic dyes from wastewater using boiler bottom ash.” Indian J. Environ. Health, 37(1), 1–10.
Mittal, A. K. (1997). “Biosorption of cationic dyes by the dead macro fungus, Fomitopsis carnea.” Ph.D. thesis, Centre for Environmental Science and Engineering, Indian Institute of Technology, Bombay, India.
Mittal, A. K., and Gupta, S. K. (1996). “Biosorption of cationic dyes by dead macro fungus Fomitopsis carnea: Batch studies.” Water Sci. Technol., 34(10), 81–87.
Mittal, A. K., and Venkobachar, C. (1989). “Studies on sorption of dyes by sulfonated coal and Ganoderma lucidum.” Indian J. Environ. Health, 31(2), 105–111.
Mullah, A. H., and Robinson, C. W. (1996). “Pentachlorophenol adsorption and desorption characteristics of granular activated carbon-I isotherms.” Water Res., 30(12), 2901–2906.
Nassar, M. M., and Magdy, Y. H. (1997). “Removal of different basic dyes from aqueous solutions by adsorption on palm-fruit bunch particles.” Chem. Eng. J., 66(3), 223–226.
O’Brien, J. A., and Myers, A. L. (1984). “Physical adsorption of gases on heterogeneous surfaces series expansion of isotherms using central moments of the adsorption energy distribution.” J. Chem. Soc., Faraday Trans. 1, 80(6), 1467–1477.
Radke, C. J., and Prausnitz, J. M. (1972). “Adsorption of organic solutes from dilute aqueous solution of activated carbon.” Ind. Eng. Chem. Fundam., 11(4), 445–451.
Ramakrishna, K. R., and Viraraghavan, T. (1996). “Dye removal using peat.” Am. Dyestuff Rep., 85(10), 28–34.
Ramakrishna, K. R., and Viraraghavan, T. (1997). “Dye removal using low cost adsorbents.” Water Sci. Technol., 36(2-3), 189–196.
Redlich, O., and Peterson, D. L. (1959). “A useful adsorption isotherm.” J. Phys. Chem., 63(6), 1024–1026.
Rychlicki, G., and Terzyk, A. P. (1998). “Thermodynamic verification of the theory of volume filling of micropores for adsorption on activated carbon.” Adsorpt. Sci. Technol., 16, 641–653.
Sag, Y., Akcael, B., and Kutsal, T. (2002). “Ternary biosorption equilibria of chromium (VI), copper (II), and cadmium (II) on Rhizopus.” Sep. Sci. Technol., 37(2), 279–309.
Sag, Y., and Aktay, Y. (2002). “A comparative study for the sorption of ions by chitin and chitosan: Application of equilibrium and mass transfer models.” Sep. Sci. Technol., 37(12), 2801–2822.
Schiewer, S., and Wong, M. H. (2000). “Ionic strength effects in biosorption of metals by marine algae.” Chemosphere, 41(1-2), 271–282.
Singh, D. K., and Srivastava, B. (1999). “Removal of basic dyes from aqueous solutions by chemically treated Psidium guyava leaves.” Indian J. Environ. Health, 41(4), 333–345.
Sips, R. (1948). “Structure of a catalyst surface.” J. Chem. Phys., 16(5), 490–495.
Sips, R. (1950). “The structure of catalyst surface II.” J. Chem. Phys., 18(9), 1024–1026.
Sun, G., and Xu, X. (1997). “Sunflower stalks as adsorbents for color removal from textile wastewater.” Ind. Eng. Chem. Res., 36(3), 808–812.
Temkin, M. I., and Pyzhev, V. (1940). “Kinetics of ammonia synthesis on promoted iron catalysts.” Acta Physicochim. URSS, 12(3), 327–356.
Ting, Y. P., and Mittal, A. K. (1999). “An evaluation of equilibrium and kinetic models for gold biosorption.” Resour. Environ. Biotechnol., 2, 311–326.
Tsai, M. C., Wang, S. S., and Yang, R. T. (1983). “Pore diffusion model for cyclic separation: Temperature swing separation of hydrogen and methane at elevated pressures.” AIChE J., 29(6), 966–975.
Volesky, B. (1999). “Sorption for the next century.” Proc., Int. Biohydrometallurgy Symp., El. Escorial, Spain, 20–23.
Wang, R. C., Kuo, C. C., and Shyu, C. C. (1997). “Adsorption of phenols onto granular activated carbon in a liquid-solid fluidized bed.” J. Chem. Technol. Biotechnol., 68(2), 187–194.
Weber, W. J., Jr., (1972). Physicochemical processes for water quality control, Wiley-Interscience, New York, 199–255.
Weber, W. J., Jr., and Van Vliet, B. M. (1979). “A general isotherm explicit in terms of solution concentration.” Technical Memorandum E.W.R.E-010379, Environmental and Water Resources Laboratories, Univ. of Michigan, Ann Arbor, Mich.
Xue, B., Tong, D., and Sun, Y. (2001). “Characterization of PVA-based magnetic affinity support for protein adsorption.” Sep. Sci. Technol., 36(11), 2449–2461.
Yang, R. T., and Doong, S. J. (1985). “Gas separation by pressure swing adsorption: A pore diffusion model for bulk separation.” AIChE J., 31(11), 1829–1842.
Yang, X. Y., and Al-Duri, B. (2000). “Application of branched pore diffusion model in the adsorption of reactive dyes on activated carbon.” Chem. Eng. J., 83(1), 15–23.
Yu, J. W., and Neretneiks, I. (1990). “Single-component and multicomponent adsorption equilibrium on activated carbon of methylcyclohexane, toluene, and isobutyl methyl ketone.” Ind. Eng. Chem. Res., 29(2), 220–231.
Zhou, M. L., Martin, G., Taha, S., and Santanna, F. (1998). “Adsorption isotherm comparison and modeling in liquid phase onto activated carbon.” Water Res., 32(4), 1109–1118.
Information & Authors
Information
Published In
Copyright
© 2006 ASCE.
History
Received: Jul 18, 2005
Accepted: May 13, 2006
Published online: Dec 1, 2006
Published in print: Dec 2006
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.