Isotherm Equation for Water Vapor Adsorption onto Activated Carbon
Publication: Journal of Environmental Engineering
Volume 124, Issue 11
Abstract
A simple isotherm model has been developed for the type-5 equilibrium adsorption systems by considering the effects of both primary and secondary adsorptive sites. The model was applied to interpret experimental data describing water vapor adsorption capacities of four activated carbon adsorbents for relative vapor pressures from 0.0 to 0.95 and temperatures between 288 and 308 K. Good agreement was observed between the model and experimental results. The isotherm parameters were found to either correlate well to the Brunauer, Emmett, and Teller specific surface area or have limited effect on describing the adsorption onto adsorbents made from the same precursor but activated with different degrees of burnout. The limiting pore volumes of the adsorbents obtained from the model based on water vapor adsorption compared favorably with those measured using volatile organic compounds.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Adamson, A. W. (1976). Physical chemistry of surfaces, 3rd Ed., John Wiley & Sons, Inc., New York.
2.
Barton, S. S., Evans, M. J. B., and MacDonald, A. J.(1991). “The adsorption of water vapor by porous carbon.”Carbon, 29(8), 1099–1105.
3.
Barton, S. S., Evans, M. J. B., and MacDonald, A. J.(1992). “An equation describing water vapor adsorption on porous carbon.”Carbon, 30(1), 123–124.
4.
Basmadjian, D. (1997). The little adsorption book a practical guide for engineers and scientists. CRC Press, New York.
5.
Beltrami, E. (1987). Mathematics for dynamic modeling. Academic Press, Inc., New York.
6.
Cal, M. P. (1995). “Characterization of gas phase adsorption capacity of untreated and chemically treated activated carbon fiber cloths,” PhD thesis, University of Illinois, Urbana-Champaign, Ill.
7.
Cal, M. P., Larson, S. M., and Rood, M. J.(1994). “Experimental and modeled results describing the adsorption of acetone and benzene onto activated carbon fibers.”Envir. Progress, 13(1), 26–30.
8.
Cal, M. P., Rood, M. J., and Larson, S. M.(1997). “Gas phase adsorption of volatile organic compounds and water vapor on activated carbon cloth.”Energy and Fuels, 11, 311–315.
9.
Dubinin, M. M. (1975). “Physical adsorption of gases and vapors in micropores.”Progress in surface and membrane science, Vol. 9, D. A. Cadenhead, J. E. Danielli, and M. D. Rosenberg, eds., Academic Press, Inc., San Diego, Calif.
10.
Dubinin, M. M.(1980). “Water vapor adsorption and the microporous structures of carbonaceous adsorbents.”Carbon, 18, 355–364.
11.
Foster, K. L., Fuerman, R. G., Economy, J., Larson, S. M., and Rood, M. J.(1992). “Adsorption characteristics of trace volatile organic compounds in gas streams into activated carbon fibers.”Chem. Mat., 4, 1068–1073.
12.
Hassan, N. M., Ghosh, T. K., Hines, A. L., and Loyalka, S. K. (1991). “Adsorption of water vapor on BPL activated carbon.”Carbon, 29(4/5), 681–683.
13.
International Mathematical and Statistical Library (IMSL). (1994). Visual Numerics, Inc., Houston, Tex.
14.
Suzuki, M.(1994). “Activated carbon fiber: Fundamentals and applications.”Carbon, 32(4), 577–586.
Information & Authors
Information
Published In
Copyright
Copyright © 1998 American Society of Civil Engineers.
History
Published online: Nov 1, 1998
Published in print: Nov 1998
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.