Venting Test Analysis Using Jacob's Approximation
Publication: Journal of Environmental Engineering
Volume 122, Issue 3
Abstract
Field venting tests were conducted in alluvial sands residing between the water table and a clay layer. Flow rate, barometric pressure, and well-pressure data were recorded using pressure transmitters and a personal computer. Data was logged as frequently as every second during periods of rapid change in pressure. Tests were conducted at various extraction rates. The data from several tests were analyzed concurrently by normalizing the well pressures with respect to extraction rate. The normalized pressures vary logarithmically with time and fall on one line allowing a single match of the Jacob approximation to all tests. Though the Jacob approximation was originally developed for hydraulic pump test analysis, it is now commonly used for venting test analysis. Only recently, however, has it been used to analyze several transient tests simultaneously. For the field venting tests conducted in the alluvial sands, the air permeability and effective porosity determined from the concurrent analysis are 8.2 × 10 −7 cm 2 and 20%, respectively.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Baehr, A. L., and Hult, M. F. (1988). “Determination of the air-phase permeability tensor of an unsaturated zone at the Bemidji, Minnesota, research site.”Proc., 4th Tech. Meeting, Water Resour. Investigation Rep. 88-4220, 55–62. United States Geological Survey Program on Toxic Waste, Phoenix, Ariz.
2.
Baehr, A. L., and Hult, M. F.(1991). “Evaluation of unsaturated zone air permeability through pneumatic tests.”Water Resour. Res., 27(10), 2605–2617.
3.
Baehr, A. L., and Joss, C. J.(1995). “An updated model of induced airflow in the unsaturated zone.”Water Resour. Res., 31(2), 417–421.
4.
Bear, J. (1979). Hydraulics of groundwater . McGraw-Hill Book Co., Inc., New York, N.Y.
5.
Beckett, G. D., and Huntley, D.(1994). “Characterization of flow parameters controlling soil vapor extraction.”Ground Water, 32(2), 239–247.
6.
Cooper, H. H., and Jacob, C. E.(1946). “A generalized graphical method for evaluating formation constants and summarizing well field history.”Trans., Am. Geophys. Union, 27(4), 526–534.
7.
Edwards, K. B., and Jones, L. C.(1994). “Air permeability from pneumatic tests in oxidized till.”J. Envir. Engrg., ASCE, 120(2), 329–347.
8.
Freeze, R. A., and Cherry, J. A. (1979). Groundwater . Prentice-Hall, Inc., Englewood Cliffs, N.J.
9.
Hantush, M. S., and Jacob, C. E.(1955). “Nonsteady radial flow in an infinite leaky aquifer.”Trans., Am. Geophys. Union, 36(1), 95–100.
10.
Hantush, M. S.(1956). “Analysis of data from pumping tests in leaky aquifers.”Trans., Am. Geophys. Union, 37(6), 702–714.
11.
Johnson, P. C., Kemblowski, M. W., and Colthart, J. D.(1990). “Quantitative analysis for the cleanup of hydrocarbon-contaminated soils by in-situ soil venting.”Ground Water, 28(3), 413–429.
12.
Kaluarachchi, J. J.(1995). “Analytical solution to two-dimensional axisymmetric gas flow with Klinkenberg effect.”J. Envir. Engrg., ASCE, 121(5), 417–420.
13.
Massmann, J. W.(1989). “Applying groundwater flow models in vapor extraction system design.”J. Envir. Engrg., ASCE, 115(1), 129–149.
14.
Massmann, J. W., and Madden, M.(1994). “Estimating air conductivity and porosity from vadose-zone pumping tests.”J. Envir. Engrg., ASCE, 120(2), 313–328.
15.
Shan, C., Falta, R. W., and Javandel, I.(1992). “Analytical solutions for steady state gas flow to a soil vapor extraction well.”Water Resour. Res., 28(4), 1105–1120.
16.
Theis, C. V. (1935). “The relation between lowering of the piezometric surface and the rate and duration of discharge of a well using ground water storage.”Trans., Am. Geophys. Union, 16th Annu. Meeting, Part 2, 519–524.
Information & Authors
Information
Published In
Copyright
Copyright © 1996 American Society of Civil Engineers.
History
Published online: Mar 1, 1996
Published in print: Mar 1996
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.