CONLIGHT: Lighting Design Model for Nighttime Highway Construction
Publication: Journal of Construction Engineering and Management
Volume 131, Issue 4
Abstract
The utilization of nighttime work in highway construction and rehabilitation projects has been increasing in recent years throughout the United States. In this type of projects, construction planners are required to develop and submit a lighting plan that provides: (1) adequate illuminance levels for all planned nighttime construction tasks; (2) reasonable uniformity of light distribution in the work area, and (3) acceptable glare levels to both road users and construction workers. In order to support construction planners in this vital and challenging task, this paper presents a lighting design model, named CONLIGHT, which is capable of considering the specific requirements of nighttime highway construction operations. The model is developed to enable construction planners to evaluate the performance of various lighting plans and select a practical design that complies with all lighting requirements for the nighttime work being planned. An application example is analyzed to illustrate the use of the model and demonstrate its accuracy and capabilities in generating practical lighting plans for nighttime construction and rehabilitation projects.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers gratefully acknowledge the financial support provided for this research project by the National Science Foundation under Grant No. CMS 0238470, and by the Illinois Transportation Research Center under Grant No. ITRC-02 VD-H1.
References
Al-Kaisy, A., and Nassar, K. (2003). “Nighttime construction issues revisited.” Proc., Transportation Research Board 82nd Annual Meeting.
Bryden, J., and Mace, D. (2002). “Guidelines for design and operation of nighttime traffic control for highway maintenance and construction.” NCHRP Rep. No. 476, National Cooperative Highway Research Program, Transportation Research Board, National Research Council, Washington, D.C.
Cottrell, B. H. (1999). “Improving night work zone traffic control.” Final Rep. Prepared for Virginia Transportation Research Council, Virginia Department of Transportation and the University of Virginia, Charlottesville, Va.
Ellis, R. D., Jr., and Amos, S. J. (1996). “Development of work zone lighting standards for nighttime highway work.” Transportation Research Record. 1529, Transportation Research Board, Washington, D.C.
El-Rayes, K., and Hyari, K. (2002). “Automated DSS for lighting design of nighttime operations in highway construction projects.” Proc., 19th Int. Symp. on Automation and Robotics in Construction, ISARC 2002, National Institute of Standards and Technology, Gaithersburg, Md.
El-Rayes, K., and Hyari, K. (2003). “Lighting design requirements for highway nighttime construction.” Proc., Construction Research Congress, ASCE, Reston, Va.
Exceline (2003). “Floodlighting lighting design.” ⟨http://www.exceline.com/catalog̱pdf/SINGLEPA/PAGES100/Page̱179.pdf⟩
Federal Highway Administration (FWHA). (2000). Manual on uniform traffic control devices, United States Department of Transportation, Washington, D.C.
Hancher, D., and Taylor, T. (2001). “Night-time construction issues.” Paper Presented at the Transportation Research Board 80th Annual Meeting.
Homberger, W. S., and Kell, J. H. (1988). Fundamentals of traffic engineering, 12th Ed., Institute of Transportation Studies, Univ. of California at Berkley, Berkley, Calif.
Illumination Engineering Society of North America (IESNA). (1998). “IESNA guide for choosing light sources for general lighting.” Rep. No. DG-10-98, New York.
Illuminating Engineering Society of North America (IESNA). (2000). “IESNA practice for roadway lighting.” Rep. No. ANSI/IESNA RP-8-00, American National Standard, New York.
Kaufman, J. E., and Haynes, H., eds. (1981). IES lighting handbook, Reference Vol., Illuminating Engineering Society of North America, New York.
Kumar, A. (1994). “Development of a model for determining work zone illumination requirements during nighttime highway construction.” PhD dissertation, Univ. of Florida, Gainesville, Fla.
New York State Department of Transportation (1995). “Lighting for nighttime operations—special specifications.” Engineering Instruction 95-005, New York.
North Carolina Department of Transportation (1995). “Portable construction lighting.” ⟨www.doh.dot.state.nc.us/preconstruct/highway/dsṉsrvc/specifications/english/s1412.htm⟩
O’Malley, P. (2002). “Construction work at night: The view from under the lights.” Grading and Excavation Contractor (July/August) ⟨www.gradingandexcavation.com⟩
Park, S., Douglas, K., Griffith, P., and Haas, K. (2002). “Factors of importance for determining daytime versus nighttime operations in Oregon.” Paper Presented at the Transportation Research Board 81st Annual Meeting.
Pritchard, D. C. (1999). Lighting, 6th Ed., Addison Longman, Edinburgh Gate, Harlow, Essex, U.K.
Information & Authors
Information
Published In
Copyright
© 2005 ASCE.
History
Received: Jul 9, 2003
Accepted: Jun 23, 2004
Published online: Apr 1, 2005
Published in print: Apr 2005
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.