Fully Automated Rebar CAD/CAM System: Economic Evaluation and Field Implementation
Publication: Journal of Construction Engineering and Management
Volume 122, Issue 2
Abstract
This paper describes an economic evaluation that determines the value to the user of a fully automated rebar computer-aided design/computer-aided manufacturing (CAD/CAM) system. That value is $167,000, rising to more than $1,000,000, depending on the assumption of various economic parameters. Compared with the cost of the whole machine (about $100,000), this value is very high. The economic evaluation is based on the development of a fully automated rebar manufacturing machine, employing current technology of computerized numerically controlled machines used for the purpose. This paper also describes an actual field implementation of fully automated rebar productions in a large rebar manufacturing plant. The implementation was based on the integration of a CAD/CAM system with the existing setup of the plant. A communication link was developed to enable the data to be transferred after being extracted and processed with the CAD/CAM system.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Amaranth, P. A. (1987). “MMS: an application protocol.”Manufacturing Engrg., 98(5), CT 21–23.
2.
Au, T., and Au, T. P. (1992). Engineering economics for capital investment analysis . Prentice-Hall, Inc., Englewood Cliffs, N.J.
3.
Bernold, L. E. (1991). “Process driven automated rebar bending.”Proc., 8th Int. Symp. on Automation and Robotics in Constr., IAARC, Stuttgart, Germany, 639–646.
4.
Bernold, L. E., and Salim, M.(1993). “Placement-oriented design and delivery of concrete reinforcement.”J. Constr. Engrg. and Mgmt., ASCE, 119(2), 323–335.
5.
Burati, J. L., Farrington, J. J., and Ledbetter, W. B.(1992). “Causes of quality deviations in design and construction.”J. Constr. Engrg. and Mgmt., ASCE, 118(1), 34–49.
6.
Cary, H. B. (1979). Modern welding technology . Prentice-Hall, Inc., Englewood Cliffs, N.J.
7.
Deichmann, U.(1991). “Automatic link benders—advancements.”Bentonwerk und Fertigteil-Technik, 57(2), 67–69.
8.
Doron, A., Lavi, N., and Koish, Y. (1971). Numerically-controlled-machine survey in Israel . Inst. for Production and Labor, Tel-Aviv, Israel (in Hebrew).
9.
Dunston, P. S., and Bernold, L. E. (1993). “Intelligent control for robotic rebar bending.”Proc., 10th Int. Symp. on Automation and Robotics in Constr., IAARC, Stuttgart, Germany, 101–108.
10.
Jones, V. C. (1988). MAP/TOP networking: a foundation for computer integrated manufacturing . McGraw-Hill Book Co., Inc., New York, N.Y.
11.
Kaplan, M. (1989). “Cost benefit analysis of mechanical CAD in a research and development organization,” MSc. thesis, Technion-IIT, Haifa, Israel (in Hebrew).
12.
Klein, R.(1990). “Bending operations in the concrete plant.”Bentonwerk und Fertigteil-Technik, 56(2), 39–46.
13.
Melvin, L. H. (1986). “The RS-511 manufacturing messaging service nears reality for layer seven.”Control Engrg., Vol. 33, 32–34.
14.
Miyatake, Y., and Kangari, R.(1993). “Experiencing computer integrated construction.”J. Constr. Engrg. and Mgmt., ASCE, 119(2), 307–322.
15.
Navon, R.(1990). “Cost and weight analysis of a construction robot at the conceptual design stage.”Manufacturing Rev., 3(4), 238–244.
16.
Navon, R.(1995). “COCSY I: CAM-oriented CAD system.”J. Comp. in Civ. Engrg., ASCE, 9(4), 236–243.
17.
Navon, R., and Warszawski, A.(1992). “Factors affecting the productivity of the multi-purpose interior finishing robot.”Int. J. Constr. Information Technol., 1(1), 59–78.
18.
Navon, R., Rubinovitz, Y., and Coffler, M. (1995). “RCCS: rebar CAD/CAM system.”Microcomputers in Civ. Engrg., Vol. 10, 397–412.
19.
Ruegg, T. R., and Marshall, H. E. (1990). Building economics . Van Nostrand Reinhold, New York, N.Y.
20.
Schwarzkopf, M.(1991). “Modern reinforcement technology.”Betonwerk und Fertigteil-Technik, 57(2), 58–60.
21.
Teicholz, P., and Fischer, M.(1994). “Strategy for computer integrated construction technology.”J. Constr. Engrg., and Mgmt., ASCE, 120(1), 117–131.
22.
The Standards Institution of Israel. (1987). Concrete Code SII-466 . Tel Aviv, Israel (in Hebrew).
23.
Thuesen, G. J., and Fabrycky, W. J. (1993). Engineering economy . Prentice-Hall, Inc., Englewood Cliffs, N.J.
24.
Warszawski, A.(1985). “Economic implications of robots in building.”Build. and Environment, 20(2), 73–81.
25.
Warszawski, A. (1990). Industrialization and robotics in building . Harper & Row, Publishers, Inc., New York, N.Y.
26.
Warszawski, A. (1992). “Automation of the building process.”Proc., 9th Int. Symp. on Automation and Robotics in Constr., IAARC, Stuttgart, Germany, 29–34.
27.
Zajicek, U. (1992). “Development of Building Applications in Robotics Technology,” MSc. thesis, Technion-IIT, Haifa, Israel (in Hebrew).
Information & Authors
Information
Published In
Copyright
Copyright © 1996 American Society of Civil Engineers.
History
Published online: Jun 1, 1996
Published in print: Jun 1996
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.