Construction Site Applications of CAD
Publication: Journal of Construction Engineering and Management
Volume 120, Issue 3
Abstract
Computer‐aided design (CAD) is a valuable tool for construction engineering to improve technical support of construction operations. The benefits obtained from CAD applications in the field include increased timeliness and accuracy of field drawings, improved communication of technical information tailored to the specific needs of the user, and increased field productivity. These benefits result from using CAD to automate existing processes and to provide new information for construction. Examples of using CAD to automate existing processes include planning survey layout, planning construction sequence and methods, analyzing concrete placements, designing formwork for concrete, and coordinating subcontractors. The new processes and products include analyzing design requirements, planning site development, analyzing requirements for construction equipment, and planning concrete construction operations. Taking full advantage of the potential benefits of CAD requires experimentation to determine the applications that best fit the needs of the firm, projects, and training. The new construction‐engineering capabilities from effective use of CAD highlight the need to integrate technical information supplied and used by design firms and construction contractors.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
“Better than a blueprint.” (1991). Engrg. News Rec., 226(17), 24–28.
2.
Gatlin, C. E. Jr. (1989). “Benefits of 3D CAD in the construction of power plants.” 1st Int. Conf. Fossil Plant Constr., A. Armor, ed., Electric Power Research Institute, Palo Alto, Calif.
3.
Gates, K. H. III, and Wickard, D. (1989). “Construction‐CAE: integrated planning and cost control.” 33rd Annu. Meeting of the Am. Assoc. of Cost Engrs., American Association of Cost Engineers, San Diego, Calif.
4.
Ibbs, C. W., and Choi, K. C. (1989). “Cost effectiveness of computerization in design and construction.” Report to the Construction Industry Institute at the University of Texas at Austin, Univ. of California, Berkeley, Calif.
5.
Mahoney, J. J. (1991). “3D CAD at the Doswell project site.” Proc. 2nd Int. Conf. Fossil Plant Constr., C. B. Tatum, ed., Electric Power Research Institute, Palo Alto, Calif.
6.
Mahoney J. J., Tatum, C. B., and Kishi, K. (1990). “Construction site applications of CAD,” Tech. Rep. No. 36, Center for Integrated Facility Engineering, Stanford University, Stanford, Calif.
7.
Nevins, D. P., and Zabilski, R. J. (1989). “An integrated system for fossil power plant construction and retrofit projects.” 1st Int. Conf. on Fossil Plant Construction, A. Armor, ed., Electric Power Research Institute, Palo Alto, Calif.
8.
Port, S. (1989). The management of CAD for construction. Van Nostrand Reilhold, New York, N.Y.
9.
Reinschmidt, K. F., and Zabilski, R. J. (1989). “Applications of computer graphics in construction.” Proc. Constr. Cong. I—Excellence in the Constructed Project, ASCE, New York, N.Y., 137–142.
10.
Simons, K. L., Thornberry, H. L., and Wickard, D. A. (1988). “Simulation System for Construction Planning and Scheduling.” Joint ASME/IEEE Power Generation Conf., ASME, New York, N.Y.
11.
Tatum, C. B. (1989a). “Managing for increased design and construction innovation.” J. Mgmt. in Engrg., ASCE, 5(4), 385–399.
12.
Tatum, C. B. (1989b). “Organizing to increase innovation in the construction firm.” J. Constr. Engrg. Mgmt., ASCE, 115(4), 602–617.
13.
Williams, J. M. (1991). “Computer aided engineering applications for the conceptual planning of modular projects.” Proc. 2nd Int. Conf. on Fossil Plant Constr., Electric Power Research Institute, Palo Alto, Calif.
14.
Zabilski, R. J., and Hall, H. E. (1989). “Presented in 3‐D.” Civ. Engrg., 59(6), 48–50.
Information & Authors
Information
Published In
Copyright
Copyright © 1994 American Society of Civil Engineers.
History
Received: Dec 7, 1992
Published online: Sep 1, 1994
Published in print: Sep 1994
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.