Abstract
This study focuses on the design procedure and development of the unbonded fiber-reinforced elastomeric isolator (UFREI) and its application to prevalent masonry building practices in developing countries. The proposed design procedure caters to the development of rectangular UFREIs with or without modifications, considering an improved shear behavior formulation. Afterward, the proposed design procedure is used to design the isolation system for a pre-existing base-isolated masonry building located in the Tawang district in the northeastern state of Arunachal Pradesh in India. Three different configurations of the above building [i.e., fixed base, isolated using square UFREIs, and isolated using modified rectangular UFREIs (MR-UFREI)] are considered for a comparative response analysis under a set of probable ground motions during a service period of 100 years. The building is modeled in SAP2000, where it is subjected to nonlinear time-history analysis under the considered set of ground motions. The masonry walls are modeled as nonlinear layered shell elements, and concrete floors as rigid diaphragms. An improved shear formulation of UFREI is used to model the isolation system as a combination of a multilinear elastic spring and a dashpot. Major response parameters, i.e., floor accelerations, isolator displacement, interstory drift ratio, etc., are investigated, and a significant improvement is witnessed throughout with the use of the MR-UFREI isolation system. The stress–strain distribution and concentrations in the masonry structure and isolation system are also investigated. These distributions are further used to quantify the fatigue losses to the elastomer layers used in the isolation system during the design period, which is found to be minimal.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, or codes that support the findings of this study are available from the corresponding author upon reasonable request.
References
Akhaveissy, A. H., and G. Milani. 2013. “Pushover analysis of large scale unreinforced masonry structures by means of a fully 2D non-linear model.” Constr. Build. Mater. 41 (Apr): 276–295. https://doi.org/10.1016/j.conbuildmat.2012.12.006.
Angeli, P., G. Russo, and A. Paschini. 2013. “Carbon fiber-reinforced rectangular isolators with compressible elastomer: Analytical solution for compression and bending.” Int. J. Solids Struct. 50 (22–23): 3519–3527. https://doi.org/10.1016/j.ijsolstr.2013.06.016.
ASCE. 2022. Minimum design loads for buildings and associated criteria for buildings and other structures. SEI 7-22. Reston, VA: ASCE.
Ashkezari, G. D., A. A. Aghakouchak, and M. Kokabi. 2008. “Design, manufacturing and evaluation of the performance of steel like fiber reinforced elastomeric seismic isolators.” J. Mater. Process. Technol. 197 (1–3): 140–150. https://doi.org/10.1016/j.jmatprotec.2007.06.023.
Bakhshi, A., M. H. Jafari, and V. Valadoust Tabrizi. 2014. “Study on dynamic and mechanical characteristics of carbon fiber- and polyamide fiber-reinforced seismic isolators.” Mater. Struct. 47 (3): 447–457. https://doi.org/10.1617/s11527-013-0071-z.
Das, A., S. K. Deb, and A. Dutta. 2016. “Shake table testing of un-reinforced brick masonry building test model isolated by U-FREI.” Earthquake Eng. Struct. Dyn. 45 (2): 253–272. https://doi.org/10.1002/eqe.2626.
Das, A., A. Dutta, and S. K. Deb. 2015. “Performance of fiber-reinforced elastomeric base isolators under cyclic excitation.” Struct. Control Health Monit. 22 (2): 197–220. https://doi.org/10.1002/stc.1668.
de Raaf, M. G. P., M. J. Tait, and H. Toopchi-Nezhad. 2011. “Stability of fiber-reinforced elastomeric bearings in an unbonded application.” J. Compos. Mater. 45 (18): 1873–1884. https://doi.org/10.1177/0021998310388319.
Ehsani, B., and H. Toopchi-Nezhad. 2017. “Systematic design of unbonded fiber reinforced elastomeric isolators.” Eng. Struct. 132 (Feb): 383–398. https://doi.org/10.1016/j.engstruct.2016.11.036.
Galano, S., A. Calabrese, D. Losanno, G. Serino, and S. Strano. 2022. “Tuning the lateral response of unbonded fiber reinforced elastomeric isolators (U-FREIs) through horizontal holes: Experimental and numerical findings.” Compos. Struct. 289 (Jun): 115454. https://doi.org/10.1016/j.compstruct.2022.115454.
Gerharer, U., A. Strauss, and K. Bergmeister. 2011. “Verbesserte Bemessungsrichtlinien für Bewehrte Elastomerlager.” Bautechnik 88 (7): 451–458. https://doi.org/10.1002/bate.201101475.
Ghorbi, E., and H. Toopchi-Nezhad. 2023. “Annular fiber-reinforced elastomeric bearings for seismic isolation of lightweight structures.” Soil Dyn. Earthquake Eng. 166 (Mar): 107764. https://doi.org/10.1016/j.soildyn.2023.107764.
Habieb, A. B., G. Milani, and T. Tavio. 2018. “Two-step advanced numerical approach for the design of low-cost unbonded fiber reinforced elastomeric seismic isolation systems in new masonry buildings.” Eng. Fail. Anal. 90 (Aug): 380–396. https://doi.org/10.1016/j.engfailanal.2018.04.002.
Habieb, A. B., M. Valente, and G. Milani. 2019. “Base seismic isolation of a historical masonry church using fiber reinforced elastomeric isolators.” Soil Dyn. Earthquake Eng. 120 (May): 127–145. https://doi.org/10.1016/j.soildyn.2019.01.022.
Kaushik, H. B., D. C. Rai, and S. K. Jain. 2007. “Uniaxial compressive stress-strain model for clay brick masonry.” Curr. Sci. 92 (4): 497–501.
Kelly, J. M. 1999. “Analysis of fiber-reinforced elastomeric isolators.” J. Seismol. Earthquake Eng. 2 (1): 19–34.
Kelly, J. M. 2002. “Seismic isolation systems for developing countries.” Earthquake Spectra 18 (3): 385–406. https://doi.org/10.1193/1.1503339.
Kelly, J. M., and D. A. Konstantinidis. 2011. Mechanics of rubber bearings for seismic and vibration isolation. Hoboken, NJ: Wiley.
Korini, O., and H. Bilgin. 2012. “A new modeling approach in the pushover analysis of masonry structures.” In Proc., Int. Students’ Conf. of Civil Engineering, ISCCE 2012, 1–8. Tirana, Albania: Epoka Univ.
Madera Sierra, I. E., D. Losanno, S. Strano, J. Marulanda, and P. Thomson. 2019. “Development and experimental behavior of HDR seismic isolators for low-rise residential buildings.” Eng. Struct. 183 (Mar): 894–906. https://doi.org/10.1016/j.engstruct.2019.01.037.
Mars, W. V., and A. Fatemi. 2003. “A phenomenological model for the effect of R ratio on fatigue of strain crystallizing rubbers.” Rubber Chem. Technol. 76 (5): 1241–1258. https://doi.org/10.5254/1.3547800.
Mars, W. V., and A. Fatemi. 2005. “Multiaxial fatigue of rubber: Part I: Equivalence criteria and theoretical aspects.” Fatigue Fract. Eng. Mater. Struct. 28 (6): 515–522. https://doi.org/10.1111/j.1460-2695.2005.00891.x.
Moon, B., G.-J. Kang, B. Kang, and J. M. Kelly. 2002. “Design and manufacturing of fiber reinforced elastomeric isolator for seismic isolation.” J. Mater. Process Technol. 130 (Dec): 145–150. https://doi.org/10.1016/S0924-0136(02)00713-6.
Osgooei, P. M., N. C. Van Engelen, D. Konstantinidis, and M. J. Tait. 2015. “Experimental and finite element study on the lateral response of modified rectangular fiber-reinforced elastomeric isolators (MR-FREIs).” Eng. Struct. 85 (Feb): 293–303. https://doi.org/10.1016/j.engstruct.2014.11.037.
Pauletta, M. 2019. “Method to design fiber-reinforced elastomeric isolators (U-FREIs) and application.” Eng. Struct. 197 (Oct): 109366. https://doi.org/10.1016/j.engstruct.2019.109366.
Pauletta, M., D. Di Luca, E. Russo, and C. Fumo. 2018. “Seismic rehabilitation of cultural heritage masonry buildings with unbonded fiber reinforced elastomeric isolators (U-FREIs)—A case of study.” J. Cult. Herit. 32 (Jul): 84–97. https://doi.org/10.1016/j.culher.2017.09.015.
Prakash, S., and R. S. Jangid. 2020. “Base isolation of a masonry building using modified rectangular fiber-reinforced elastomeric isolators.” In Proc., 17th World Conf. on Earthquake Engineering, 17WCEE. Kanpur, India: National Information Centre of Earthquake Engineering at IIT.
Prakash, S., and R. S. Jangid. 2022a. “Multi-hazard response of unbonded fibre-reinforced elastomeric isolator-isolated structures.” Proc. Inst. Civ. Eng. Struct. Build. 1–18. https://doi.org/10.1680/jstbu.22.00170.
Prakash, S., and R. S. Jangid. 2022b. “Optimum parameters of tuned mass damper-inerter for damped structure under seismic excitation.” Int. J. Dyn. Control 10 (5): 1322–1336. https://doi.org/10.1007/s40435-022-00911-x.
Prakash, S., and R. S. Jangid. 2022c. “Seismic response of isolated structures with an improved model of the UFREI.” Structures 42 (Aug): 434–448. https://doi.org/10.1016/j.istruc.2022.06.024.
Russo, G., M. Pauletta, and A. Cortesia. 2013. “A study on experimental shear behavior of fiber-reinforced elastomeric isolators with various fiber layouts, elastomers and aging conditions.” Eng. Struct. 52 (Jul): 422–433. https://doi.org/10.1016/j.engstruct.2013.02.034.
Sharma, A., and R. Khare. 2016. “Pushover analysis for seismic evaluation of masonry wall.” Int. J. Struct. Civ. Eng. Res. 5 (3): 235–240. https://doi.org/10.18178/ijscer.5.3.235-240.
Strauss, A., E. Apostolidi, T. Zimmermann, U. Gerhaher, and S. Dritsos. 2014. “Experimental investigations of fiber and steel reinforced elastomeric bearings: Shear modulus and damping coefficient.” Eng. Struct. 75 (Sep): 402–413. https://doi.org/10.1016/j.engstruct.2014.06.008.
Tait, M. J., and R. G. Drysdale. 2008. “Influence of end geometry on fiber reinforced elastomeric isolator bearings.” In Proc., 14th World Conf. on Earthquake Engineering, 14WCEE. Kanpur, India: National Information Centre of Earthquake Engineering at IIT.
Thuyet, V. N., S. K. Deb, and A. Dutta. 2018. “Mitigation of seismic vulnerability of prototype low-rise masonry building using U-FREIs.” J. Perform. Constr. Facil. 32 (2): 1–13. https://doi.org/10.1061/(ASCE)CF.1943-5509.0001136.
Toopchi-Nezhad, H., M. J. Tait, and R. G. Drysdale. 2008a. “Lateral response evaluation of fiber-reinforced neoprene seismic isolators utilized in an unbonded application.” J. Struct. Eng. 134 (10): 1627–1637. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:10(1627).
Toopchi-Nezhad, H., M. J. Tait, and R. G. Drysdale. 2008b. “Testing and modeling of square carbon fiber-reinforced elastomeric seismic isolators.” Struct. Control Health Monit. 15 (6): 876–900. https://doi.org/10.1002/stc.225.
Toopchi-Nezhad, H., M. J. Tait, and R. G. Drysdale. 2011. “Bonded versus unbonded strip fiber reinforced elastomeric isolators: Finite element analysis.” Compos. Struct. 93 (2): 850–859. https://doi.org/10.1016/j.compstruct.2010.07.009.
Tran, C., A. Calabrese, M. F. Vassiliou, and S. Galano. 2020. “A simple strategy to tune the lateral response of unbonded fiber reinforced elastomeric isolators (FREIs).” Eng. Struct. 222 (Nov): 111128. https://doi.org/10.1016/j.engstruct.2020.111128.
Tsai, H. C., and J. M. Kelly. 2005. “Buckling load of seismic isolators affected by flexibility of reinforcement.” Int. J. Solids Struct. 42 (1): 255–269. https://doi.org/10.1016/j.ijsolstr.2004.07.020.
Turer, A., and B. Özden. 2008. “Seismic base isolation using low-cost scrap tire pads (STP).” Mater. Struct. 41 (5): 891–908. https://doi.org/10.1617/s11527-007-9292-3.
Van Engelen, N. C., P. M. Osgooei, M. J. Tait, and D. Konstantinidis. 2014. “Experimental and finite element study on the compression properties of modified rectangular fiber-reinforced elastomeric isolators (MR-FREIs).” Eng. Struct. 74 (Sep): 52–64. https://doi.org/10.1016/j.engstruct.2014.04.046.
Van Engelen, N. C., M. J. Tait, and D. Konstantinidis. 2012. “Horizontal behaviour of stable unbonded fiber reinforced elastomeric isolators (SU-FREIs) with holes.” In Proc., 15th World. on Earthquake Engineering. Kanpur, India: National Information Centre of Earthquake Engineering at IIT.
Van Engelen, N. C., M. J. Tait, and D. Konstantinidis. 2015. “Model of the shear behavior of unbonded fiber-reinforced elastomeric isolators.” J. Struct. Eng. 141 (7): 04014169. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001120.
Van Ngo, T., S. K. Deb, and A. Dutta. 2018. “Effect of horizontal loading direction on performance of prototype square unbonded fibre reinforced elastomeric isolator.” Struct. Control Health Monit. 25 (3): e2112. https://doi.org/10.1002/stc.2112.
Van Ngo, T., A. Dutta, and S. K. Deb. 2017. “Evaluation of horizontal stiffness of fibre-reinforced elastomeric isolators.” Earthquake Eng. Struct. Dyn. 46 (11): 1747–1767. https://doi.org/10.1002/eqe.2879.
Wang, B., H. Lu, and G. Kim. 2002. “A damage model for the fatigue life of elastomeric materials.” Mech. Mater. 34 (8): 475–483. https://doi.org/10.1016/S0167-6636(02)00175-8.
Information & Authors
Information
Published In
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Jun 20, 2023
Accepted: Oct 13, 2023
Published online: Dec 27, 2023
Published in print: May 1, 2024
Discussion open until: May 27, 2024
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.