Novel Panelized Roof Design for Offsite Fabrication of Residential Light-Frame Wood Homes
Publication: Practice Periodical on Structural Design and Construction
Volume 29, Issue 2
Abstract
Panelized fabrication of light-frame wood buildings has higher productivity than the traditional stick-built method. However, the roof production process is inefficient due to the structural system and construction method. This study proposes a novel roof system to improve the productivity of the panelized construction process for light-frame wood residential building fabrication. This unique system uses a holistic approach to design several roof components considering structural requirements, manufacturing efficiency, and on-site installation factors. This paper presents a case study of the gable roof of a two-story building to demonstrate the implementation of this novel system. The two main components of the novel roof system are the ceiling frame and roof panels. Ceiling frame analysis showed that three different fabrication options are possible in the current off-site setting. Twenty-four nail-connection specimens were tested under shear and uplift loading to determine the load–slip response of nail connections used in structural composite wood such as oriented strand board (OSB) and laminated strand lumber (LSL). The roof panel design requirement was determined based on the nail connection test and finite-element analysis. The results showed that ceiling frames for a gable-type roof can be produced economically using a floor panel production line, and roof panel fabrication is possible using the current wall panel production line.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
The authors thank ACQBUILT for material supplies and technical support. This work was supported by a grant from the Natural Sciences and Engineering Research Council (NSERC) of Canada through the Engage Grant and Industrial Research Chair programs.
References
ACQBUILT. 2019. “Company database and personal visits for images.” Accessed November 3, 2019. http://www.acqbuilt.com.
Ahn, S. J. 2019. “Transportation framework in panelized construction for residential building.” Ph.D. thesis, Dept. of Civil and Environment Engineering, Univ. of Alberta.
Altaf, M. S., S. H. Han, Z. Lei, S. Demirer, and M. Al-Hussein. 2018. “A case study: Prefabricated wood framed panelized roof system for single family home.” In Proc., WCTE 2018–World Conf. on Timber Engineering, 1–6. Oslo, Norway: World Conference on Timber Engineering.
ASTM. 2012. Standard test methods for mechanical fasteners in wood. D1761-12. West Conshohocken, PA: ASTM.
Brown, R. 2020. “Production improvements in offsite construction facilities using simulation and lean principles.” M.Sc. thesis, Dept. of Civil and Environmental Engineering, Univ. of Alberta.
Browne, M. 2015. “The challenge of construction logistics.” Chap. 1 in Supply chain management and logistics in construction: Delivering tomorrow’s built environment, edited by G. Lundesjo, 9–23. London: Kogan Page.
CCMC (Canadian Construction Materials Centre). 2019. Evaluation report of Canadian Construction Materials Centre (CCMC) 12627-R timber strand LSL. Ottawa: CCMC.
CSA (Canadian Standards Association). 2019. CSA O86:19, engineering design in wood. Mississauga, Canada: CSA Group.
CWC (Canadian Wood Council). 2014. Engineering guide for wood frame construction. Ottawa: CWC.
Dassault Systèmes. 2021. Abaqus analysis user’s manual. Providence, RI: Dassault Systèmes Simulia.
Doudak, G., G. McClure, and I. Smith. 2012. “Experimental evaluation of load paths in light-frame wood structure.” J. Struct. Eng. 138 (2): 258–265. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000439.
Goodier, C., and A. Gibb. 2007. “Future opportunities for offsite in the UK.” Construct. Manage. Econ. 25 (6): 585–595. https://doi.org/10.1080/01446190601071821.
He, B. M., F. Lam, and R. O. Foschi. 2001. “Modeling three-dimensional timber light-frame buildings.” J. Struct. Eng. 127 (Aug): 901–913. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:8(901).
He, W. X., and H. P. Hong. 2012. “Probabilistic characterization of roof panel uplift capacity under wind loading.” Can. J. Civ. Eng. 39 (12): 1285–1296. https://doi.org/10.1139/l2012-114.
Islam, M. S., Y. H. Chui, and M. S. Altaf. 2021. “A holistic design approach for innovative panelized light-wood frame roof construction.” In Proc., WCTE 2021–World Conf. on Timber Engineering. Santiago, Chile: World Conference on Timber Engineering.
Islam, M. S., Y. H. Chui, and M. S. Altaf. 2022a. “Design and experimental analysis of connections for a panelized wood frame roof system.” Buildings 12 (6): 847. https://doi.org/10.3390/buildings12060847.
Islam, M. S., Y. H. Chui, and Z. Chen. 2022b. “Novel apex connection for light wood frame panelized roof.” Materials 15 (21): 7457. https://doi.org/10.3390/ma15217457.
Islam, M. S., M. N. Islam, and M. S. Alam. 2017. “Properties of oriented strand board (OSB), and timber to evaluate the stiffness of timber L-joist.” In Proc., 6th Int. Conf. on Engineering Mechanics and Materials 2017, 790–801. Ottawa: CSCE.
Janowiak, J. J., D. P. Hindman, and H. B. Manbeck. 2001. “Orthotropic behavior of lumber composite materials.” Wood Fiber Sci. 33 (4): 580–594.
Karacabeyli, E., P. Lau, C. R. Henderson, F. V. Meakes, and W. Deacon. 1996. “Design rated oriented strandboard in CSA standards.” Can. J. Civ. Eng. 23 (2): 431–443. https://doi.org/10.1139/l96-047.
Koo, K., C. Lafond, and F. Abasian. 2020. “Industrialized construction program: Machining optimization: Equipment and software suppliers.” Accessed November 1, 2021. https://library.fpinnovations.ca/fr/permalink/fpipub53064.
Li, H., G. Chan, J. K. W. Wong, and M. Skitmore. 2016. “Real-time locating systems applications in construction.” Autom. Constr. 63 (Mar): 37–47. https://doi.org/10.1016/j.autcon.2015.12.001.
Li, H. X., M. N. Esfahani, M. Gul, H. Yu, D. Mah, and M. Al-Hussein. 2014. “Carbon footprint of panelized construction: An empirical and comparative study.” In Proc., Construction Research Congress 2014, 140–149. Reston, VA: ASCE. https://doi.org/10.1061/9780784413517.051.
MBI (Modular Building Institue). 2015. “First, let’s describe what modular construction is.” Accessed January 1, 2019. https://www.modular.org/what-is-modular-construction/.
Mohamadzadeh, M., D. P. Hindman, and A. G. Whaley. 2019. “Rotational stiffness of wood truss joints in lateral and diagonal bracing and truss–wall connections.” J. Archit. Eng. 25 (1): 4019003. https://doi.org/10.1061/(ASCE)AE.1943-5568.0000349.
Moses, D. M., H. G. L. Prion, H. Li, and W. Boehner. 2003. “Composite behavior of laminated strand lumber.” Wood Sci. Technol. 37 (1): 59–77. https://doi.org/10.1007/s00226-003-0169-5.
NBCC (National Building Code of Canada). 2020. National building code of Canada Part 4: Structural design. Ottawa: NBCC.
Niederwestberg, J., J. Zhou, Y. H. Chui, and M. Gong. 2018. “Bending properties of innovative multi-layer composite laminated panels.” In Proc., WCTE 2018–World Conf. on Timber Engineering. Seoul: World Conference on Timber Engineering.
Pan, W., and C. Goodier. 2012. “House-building business models and off-site construction take-up.” J. Archit. Eng. 18 (2): 84–93. https://doi.org/10.1061/(ASCE)AE.1943-5568.0000058.
Plesnik, T., J. Erochko, and G. Doudak. 2016. “Nailed connection behavior in light-frame wood shear walls with an intermediate layer of insulation.” J. Struct. Eng. 142 (7): 1–9. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001506.
Satheeskumar, N., D. J. Henderson, J. D. Ginger, and C. H. Wang. 2017a. “Finite element modelling of the structural response of roof to wall framing connections in timber-framed houses.” Eng. Struct. 134 (Mar): 25–36. https://doi.org/10.1016/j.engstruct.2016.12.034.
Satheeskumar, N., D. J. Henderson, J. D. Ginger, and C. H. Wang. 2017b. “Three-dimensional finite-element modeling and validation of a timber-framed house to wind loading.” J. Struct. Eng. 143 (9): 4017112. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001850.
Shivarudrappa, R., and B. G. Nielson. 2013. “Sensitivity of load distribution in light-framed wood roof systems due to typical modeling parameters.” J. Perform. Constr. Facil. 27 (3): 222–234. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000323.
Spasojevic, M., H. Daneshvar, Y. Chen, and Y. H. Chui. 2021. “Lateral resistance of sheathing-to-framing nailed joints with an intermediate insulation layer.” J. Struct. Eng. 147 (6): 1–11. https://doi.org/10.1061/(ASCE)ST.1943-541X.0003026.
Stevenson, S. A., A. M. El Ansary, and G. A. Kopp. 2019. “A practical modelling technique to assess the performance of wood-frame roofs under extreme wind loads.” Eng. Struct. 191 (Jul): 640–648. https://doi.org/10.1016/j.engstruct.2019.04.058.
Vessby, J., E. Serrano, and A. Olsson. 2010. “Coupled and uncoupled nonlinear elastic finite element models for monotonically loaded sheathing-to-framing joints in timber based shear walls.” Eng. Struct. 32 (11): 3433–3442. https://doi.org/10.1016/j.engstruct.2010.05.018.
Weyerhaeuser. 2021. “TimberStrand LSL TJ-9500 specifier’s guide.” Accessed January 1, 2021. https://www.weyerhaeuser.com/woodproducts/document-library/document_library_detail/tj-9505/#download.
Zhu, E. 2003. “Modelling the structural behaviour of OSB webbed timber I-beams.” Ph.D. thesis, School of Environment, Univ. of Brighton.
Information & Authors
Information
Published In
Practice Periodical on Structural Design and Construction
Volume 29 • Issue 2 • May 2024
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Jun 10, 2023
Accepted: Oct 11, 2023
Published online: Dec 28, 2023
Published in print: May 1, 2024
Discussion open until: May 28, 2024
ASCE Technical Topics:
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.