Safety and Consistency Assessment of a Two-Lane Rural Highway Passing through Mountainous Terrain
Publication: Journal of Transportation Engineering, Part A: Systems
Volume 148, Issue 12
Abstract
This paper assesses the implications of vehicle-specific operating speed and crash data on the geometric design consistency evaluation of rural highways passing through mountainous terrain. The consistency was evaluated based on the operating speeds of passenger cars, empty trucks, and loaded trucks, and the results reveal the vehicle type has a significant impact on the assessment. Regardless of the vehicle type, Safety Criterion II has shown a consistent agreement with the degree of endangerment. The endangerment of trucks has a better agreement with the overall safety criteria (82%–86%) than passenger cars (58%–61%). These findings suggest that safety criteria, particularly Safety Criterion II, can be used to analyze the geometric design consistency of undivided roadways that traverse mountainous terrain. However, Safety Criterion II also classified several geometric elements as Fair or Good in spite of a significant number of crashes occurring at these elements. A further investigation of the operating speed using continuous speed profile data revealed a significant variability in vehicle speed on the curve, and that the operating speeds estimated using the spot speed data do not reflect this variability. This study highlights the need to consider speed variability when assessing design consistency using operating-speed-based consistency criteria.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or codes that support the findings of this study are available from the corresponding author upon reasonable request.
References
AASHTO. 2011. A policy on geometric design of highways and streets. Washington, DC: AASHTO.
Alexander, G. 1986. Driver expectancy in highway design and traffic operations. Washington, DC: USDOT.
Al-Masaeid, H. R., M. Hamed, M. Aboul-Ela, and A. G. Ghannam. 1995. “Consistency of horizontal alignment for different vehicle classes.” Transp. Res. Rec. 1500 (1): 178–183.
Anderson, I. B., K. M. Bauer, D. W. Harwood, and K. Fitzpatrick. 1999. “Relationship to safety of geometric design consistency measures for rural two-lane highways.” Transp. Res. Rec. 1658 (1): 43–51. https://doi.org/10.3141/1658-06.
Cafiso, S., A. Di Graziano, G. Di Silvestro, G. La Cava, and B. Persaud. 2010. “Development of comprehensive accident models for two-lane rural highways using exposure, geometry, consistency and context variables.” Accid. Anal. Prev. 42 (4): 1072–1079. https://doi.org/10.1016/j.aap.2009.12.015.
Castro, M., L. Iglesias, and R. Rodríguez-Solano. 2006. Desarrollo de un sistema para el análisis de la consistencia del trazado de carreteras. [In Spanish.] Madrid, Spain: Universidad Politécnica de Madrid.
Castro, M., J. A. Sánchez, C. M. Vaquero, L. Iglesias, and R. Rodríguez-Solano. 2008. “Automated GIS-based system for speed estimation and highway safety evaluation.” J. Comput. Civ. Eng. 22 (5): 325–331. https://doi.org/10.1061/(ASCE)0887-3801(2008)22:5(325).
Dhahir, B., and Y. Hassan. 2018. “Studying driving behavior on horizontal curves using naturalistic driving study data.” Transp. Res. Rec. 2672 (17): 83–95. https://doi.org/10.1177/0361198118784384.
Dhahir, B., and Y. Hassan. 2019. “Using horizontal curve speed reduction extracted from the naturalistic driving study to predict curve collision frequency.” Accid. Anal. Prev. 123 (Feb): 190–199. https://doi.org/10.1016/j.aap.2018.11.020.
Dong, C., S. S. Nambisan, S. H. Richards, and Z. Ma. 2015. “Assessment of the effects of highway geometric design features on the frequency of truck involved crashes using bivariate regression.” Transp. Res. Part A Policy Pract. 75 (May): 30–41.
Donnell, E., Y. Ni, M. Adolini, and L. Elefteriadou. 2001. “Speed prediction models for trucks on two-lane rural highways.” Transp. Res. Rec. 1751 (1): 44–55. https://doi.org/10.3141/1751-06.
Donnell, E., J. Wood, S. Himes, and D. Torbic. 2016. “Use of side friction in horizontal curve design: A margin of safety assessment.” Transp. Res. Rec. 2588 (1): 61–70. https://doi.org/10.3141/2588-07.
Fitzpatrick, K., et al. 2000a. Evaluation of design consistency methods for two-lane rural highways, executive summary. Washington, DC: Federal Highway Administration.
Fitzpatrick, K., et al. 2000b. Speed prediction for two-lane rural highways. Washington, DC: Federal Highway Administration.
Garach, L., J. de Oña, G. López, and L. Baena. 2016. “Development of safety performance functions for Spanish two-lane rural highways on flat terrain.” Accid. Anal. Prev. 95 (Oct): 250–265. https://doi.org/10.1016/j.aap.2016.07.021.
Gong, H. 2007. “Operating speed prediction models for horizontal curves on rural four-lane non-freeway highways.” Doctoral dissertation, Dept. of Civil Engineering, Univ. of Kentucky.
Goyani, J., S. Arkatkar, G. Joshi, and S. M. Easa. 2022. “Crash modelling considering vehicle classes under heterogeneous traffic on two-lane highways in hilly terrain.” In Proc., 101st Annual Meeting of Transportation Research Board, Washington, DC: Transportation Research Board.
Hamidi, A., and K. Aghabayk. 2020. “Introducing a new curve with symmetrical parabolic curvature for horizontal alignment.” J. Transp. Eng. Part A Syst. 146 (6): 04020047.
Hassan, Y., G. Gibreel, and S. M. Easa. 2000. “Evaluation of highway consistency and safety: Practical application.” J. Transp. Eng. 126 (3): 193–201. https://doi.org/10.1061/(ASCE)0733-947X(2000)126:3(193).
Hassan, Y., T. Sayed, and V. Tabernero. 2001. “Establishing practical approach for design consistency evaluation.” J. Transp. Eng. 127 (4): 295–302. https://doi.org/10.1061/(ASCE)0733-947X(2001)127:4(295).
Jacob, A., and M. V. L. R. Anjaneyulu. 2013. “Operating speed of different classes of vehicles at horizontal curves on two-lane rural highways.” J. Transp. Eng. 139 (3): 287–294. https://doi.org/10.1061/(ASCE)TE.1943-5436.0000503.
Jacob, A., R. Dhanya, and M. V. L. R. Anjaneyulu. 2013. “Geometric design consistency of multiple horizontal curves on two-lane rural highways.” Procedia Social Behav. Sci. 104 (Dec): 1068–1077. https://doi.org/10.1016/j.sbspro.2013.11.202.
Krammes, R. A., R. Q. Brakett, M. A. Shaffer, J. L. Ottesen, I. B. Anderson, K. L. Fink, K. M. Collins, O. J. Pendleton, and C. J. Messer. 1995. Horizontal alignment design consistency for rural two-lane highways. Washington, DC: Federal Highway Administration.
Lamm, R., A. Beck, T. Ruscher, T. Mailaender, S. Cafiso, and G. Lacava. 2007. How to make two-lane rural roads safer. Southampton, UK: WIT.
Lamm, R., and E. M. Choueiri. 1987. “Recommendations for evaluating horizontal design consistency based on investigations in the State of New York.” Transp. Res. Rec. 1122 (1): 68–78.
Lamm, R., A. K. Guenther, and E. M. Choueiri. 1995. “Safety module for highway geometric design.” Transp. Res. Rec. 1512 (9): 7–15.
Lamm, R., J. C. Hayward, and J. G. Cargin. 1986. “Comparison of different procedures for evaluating speed consistency.” Transp. Res. Rec. 1100: 10–20.
Lamm, R., B. Psarianos, and T. Mailaender. 1999. Highway design and traffic safety engineering handbook. New York: McGraw-Hill.
Leisch, J. E., and J. P. Leisch. 1977. “New concept in design speed applications as a control in achieving consistent highway design.” Transp. Res. Rec. 631: 4–14.
Llopis-Castelló, D., B. González-Hernández, A. M. Pérez-Zuriaga, and A. García. 2018. “Speed prediction models for trucks on horizontal curves of two-lane rural roads.” Transp. Res. Rec. 2672 (17): 72–82. https://doi.org/10.1177/0361198118776111.
Malaghan, V., D. S. Pawar, and H. Dia. 2020. “Modeling operating speed using continuous speed profiles on two-lane rural highways in India.” J. Transp. Eng. Part A Syst. 146 (11): 04020124. https://doi.org/10.1061/JTEPBS.0000447.
Malaghan, V., D. S. Pawar, and H. Dia. 2021. “Exploring maximum and minimum operating speed positions on road geometric elements using continuous speed data.” J. Transp. Eng. Part A Syst. 147 (8): 04021039. https://doi.org/10.1061/JTEPBS.0000539.
Misaghi, P., and Y. Hassan. 2005. “Modeling operating speed and speed differential on two-lane rural roads.” J. Transp. Eng. 131 (6): 408–418. https://doi.org/10.1061/(ASCE)0733-947X(2005)131:6(408).
Mohan, D., G. Tiwari, and K. Bhalla. 2020. Road safety in India: Status report 2020. Delhi, India: Indian Institute of Technology Delhi.
Montella, A., and L. L. Imbriani. 2015. “Safety performance functions incorporating design consistency variables.” Accid. Anal. Prev. 74 (Jan): 133–144. https://doi.org/10.1016/j.aap.2014.10.019.
Morrall J. F., and R. J. Talarico. 1994. “Side friction demanded and margins of safety on horizontal curves.” Transp. Res. Rec. 1435 (1): 145–152.
Morris, C. M., and E. T. Donnell. 2014. “Passenger car and truck operating speed models on multilane highways with combinations of horizontal curves and steep grades.” J. Transp. Eng. 140 (11): 04014058. https://doi.org/10.1061/(ASCE)TE.1943-5436.0000715.
Polus, A., and C. Mattar-Habib. 2004. “New consistency model for rural highways and its relationship to safety.” J. Transp. Eng. 130 (3): 286–293. https://doi.org/10.1061/(ASCE)0733-947X(2004)130:3(286).
Richl, L., and T. Sayed. 2005. “Effect of speed prediction models and perceived radius on design consistency.” Can. J. Civ. Eng. 32 (2): 388–399. https://doi.org/10.1139/l04-103.
Russo, F., S. A. Biancardo, and M. Busiello. 2016. “Operating speed as a key factor in studying the driver behaviour in a rural context.” Transport 31 (2): 260–270. https://doi.org/10.3846/16484142.2016.1193054.
Sabouri, M., and A. Hamidi. 2020. “Introducing a revised model for determination of rollover threshold speed of buses.” Int. J. Heavy Veh. Syst. 27 (6): 723–742. https://doi.org/10.1504/IJHVS.2020.112974.
Schneider, B. 1999. “Development of a superior safety module for the evaluation of the danger of two-lane rural roads in tune with the actual accident situation.” Master’s thesis, Institute for Highway and Railroad Engineering, Univ. of Karlsruhe.
Shallam, R. D. K., S. P. Venthuruthiyil, M. Chunchu, and A. K. Siddagangaiah. 2021. “Operating speed modeling for the rural highways passing through hilly terrain.” J. Transp. Eng. Part A Syst. 147 (5): 04021015. https://doi.org/10.1061/JTEPBS.0000524.
Wang, Y., G. Xu, and H. Bai. 2013. “Operating speed based alignment consistency evaluation using driving simulator: Case studies from Taigan Freeway in Jiangxi, China.” Promet Traffic Transp. 25 (1): 23–31. https://doi.org/10.7307/ptt.v25i1.1244.
Wooldridge, M. D., K. M. Bauer, P. Green, and K. Fitzpatrick. 2000a. “Comparison of driver visual demand in test track, simulator, and on-road environments.” In Proc., 79th Annual Meeting of the Transportation Research Board. Washington, DC: Transportation Research Board.
Wooldridge, M. D., K. Fitzpatrick, R. Koppa, and K. Bauer. 2000b. “Effects of horizontal curvature on driver visual demand.” Transp. Res. Rec. 1737 (1): 71–77. https://doi.org/10.3141/1737-09.
Wu, K.-F., E. T. Donnell, S. C. Himes, and L. Sasidharan. 2013. “Exploring the association between traffic safety and geometric design consistency based on vehicle speed metrics.” J. Transp. Eng. 139 (7): 738–748. https://doi.org/10.1061/(ASCE)TE.1943-5436.0000553.
Xu, J., W. Lin, and Y. Shao. 2017. “New design method for horizontal alignment of complex mountain highways based on ‘trajectory-speed’ collaborative decision.” Adv. Mech. Eng. 9 (4): 1–18.
Yan, Y., G. Li, J. Tang, and Z. Guo. 2017. “A novel approach for operating speed continuous predication based on alignment space comprehensive index.” J. Adv. Transp. 2017: 1–14.
Žilioniene, D., and V. Vorobjovas. 2011. “Correspondence of horizontal and vertical alignment with safe driving conditions on low-volume roads.” Transp. Res. Rec. 2203 (1): 49–56.
Information & Authors
Information
Published In
Journal of Transportation Engineering, Part A: Systems
Volume 148 • Issue 12 • December 2022
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Feb 22, 2022
Accepted: Jul 12, 2022
Published online: Oct 10, 2022
Published in print: Dec 1, 2022
Discussion open until: Mar 10, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Fatin Najwa Mohd Nusa, Siti Zaharah Ishak, Rusdi Rusli, Che Maznah Mat Isa, Muhammad Marizwan Abdul Manan, Sonya Sulistyono, ROAD CRASH DATA VISUALISATION AND ANALYTICS USING TABLEAU FOR MOUNTAINOUS ROADWAY AREAS IN CAMERON HIGHLANDS, MALAYSIA, PLANNING MALAYSIA, 10.21837/pm.v21i28.1314, 21, (2023).
- V. A. Bharat Kumar Anna, Mallikarjuna Chunchu, Determinants of speed variability on the horizontal curves of two-lane undivided rural highways passing through mountainous terrain, International Journal of Injury Control and Safety Promotion, 10.1080/17457300.2023.2252797, 30, 4, (652-665), (2023).