Abstract
A framework to assess the fracture fragility of partial joint penetration (PJP) welded column splices in steel moment frames constructed before the 1994 Northridge earthquake is presented. These pre-Northridge splices feature low flange penetration of the PJP welds, and low-toughness weld materials, such that they are considered susceptible to fracture with possible catastrophic consequences. Estimating their fracture risk is especially important, given that retrofitting them is highly disruptive to building operations. The presented framework addresses shortcomings of previous research and performance assessment guidance that does not consider key mechanistic or statistical effects. To accomplish this, three-dimensional fracture mechanics finite-element simulations are conducted to assess fracture toughness demands. These demands are then interpreted through a master curve–based approach that rigorously considers spatial randomness and weakest-link sampling of weld toughness properties, along with the uncertainty in estimation of these properties. The framework is implemented in a tool which automates the entire process, facilitating application in a professional setting. The tool (and the underlying framework) is demonstrated on a range of splice configurations to examine the effects of configuration, loading, and material parameters. Limitations are outlined.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The authors are grateful to the Pacific Earthquake Engineering Center (Grant No. 1158-NCTRVI) and the National Science Foundation (Grant No. 2129445) for their support. Input from James Malley and Robert Pekelnicky of Degenkolb Engineers, and Masume Dana and Ali Roufigarinejad of Forell Elsesser Engineers is greatly appreciated. The findings presented in this paper do not reflect those of the sponsors and are solely those of the authors.
References
AISC. 2016. Seismic provisions for structural steel buildings. Chicago: AISC.
Anderson, T. L. 2017. Fracture mechanics: Fundamentals and applications. Boca Raton, FL: CRC Press.
ASTM. 2020a. Standard test method for determination of reference temperature for ferritic steels in the transition range. West Conshohocken, PA: ASTM.
ASTM. 2020b. Standard test method for measurement of fracture toughness. West Conshohocken, PA: ASTM.
ATC (Applied Technology Council). 2017. Guidelines for nonlinear structural analysis for design of buildings: Part II a—Steel moment frames. Gaithersburg, MD: National Institute of Standards and Technology.
ATC (Applied Technology Council). 2022. Research plan for the study of pre-Northridge earthquake weak panel zones and welded column splices with PJP groove welds (Request for proposal). Gaithersburg, MD: National Institute of Standards and Technology.
Barsom, J., and S. Rolfe. 1970. Correlations between KIc and Charpy V-notch test results in the transition-temperature range, 281–302. West Conshohocken, PA: ASTM.
Barsom, J. M. 1975. “Development of the AASHTO fracture-toughness requirements for bridge steels.” Eng. Fract. Mech. 7 (3): 605–618. https://doi.org/10.1016/0013-7944(75)90060-0.
Barsom, J. M., and S. T. Rolfe. 1999. Fracture and fatigue control in structures: Applications of fracture mechanics. West Conshohocken, PA: ASTM.
Beremin, F., A. Pineau, F. Mudry, J.-C. Devaux, Y. D’Escatha, and P. Ledermann. 1983. “A local criterion for cleavage fracture of a nuclear pressure vessel steel.” Metall. Trans. A 14 (11): 2277–2287. https://doi.org/10.1007/BF02663302.
Brocks, W., and I. Scheider. 2003. “Reliable J-values—Numerical aspects of the path-dependence of the J-integral in incremental plasticity.” Mater. Test 45 (6): 264–275. https://doi.org/10.1515/mt-2003-450608.
Bruneau, M., and S. A. Mahin. 1990. “Ultimate behavior of heavy steel section welded splices and design implications.” J. Struct. Eng. 116 (8): 2214–2235. https://doi.org/10.1061/(ASCE)0733-9445(1990)116:8(2214).
BSI (British Standards Institution). 2019. Guide on methods for assessing the acceptability of flaws in metallic structures. London: BSI.
Chi, W.-M., and G. G. Deierlein. 2000. Integration of analytical investigations on the fracture behavior of welded moment resisting connections. Stanford, CA: Blume Earthquake Engineering Center.
Chi, W.-M., G. G. Deierlein, and A. Ingraffea. 2000. “Fracture toughness demands in welded beam-column moment connections.” J. Struct. Eng. 126 (1): 88–97. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:1(88).
Chisholm, M. P., R. G. Pekelnicky, and J. O. Malley. 2017. “High-rise pre-Northridge partial joint penetration column splice repair.” In Proc., SEAOC 2017. Sacramento, CA: Structural Engineers Association of California.
Collins, W., R. Sherman, R. Leon, and R. Connor. 2016. “State-of-the-art fracture characterization. II: Correlations between Charpy V-notch and the master curve reference temperature.” J. Bridge Eng. 21 (12): 04016098. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000955.
Fisher, J., R. Dexter, and E. Kaufmann. 1995. Fracture mechanics of welded structural steel connections. Sacramento, CA: SAC Joint Venture.
Galasso, C., K. Stillmaker, C. Eltit, and A. Kanvinde. 2015. “Probabilistic demand and fragility assessment of welded column splices in steel moment frames.” Earthquake Eng. Struct. Dyn. 44 (11): 1823–1840. https://doi.org/10.1002/eqe.2557.
Hutchinson, J. W. 1968. “Singular behaviour at the end of a tensile crack in a hardening material.” J. Mech. Phys. Solids 16 (1): 13–31. https://doi.org/10.1016/0022-5096(68)90014-8.
IAEA (International Atomic Energy Agency). 2005. Guidelines for application of the master curve approach to reactor pressure vessel integrity in nuclear power plants. Vienna, Austria: IAEA.
Jaquess, T. K., and K. Frank. 1999. Characterization of the material properties of rolled sections. Sacramento, CA: SAC Joint Venture.
Kanvinde, A. M., B. V. Fell, I. R. Gomez, and M. Roberts. 2008. “Predicting fracture in structural fillet welds using traditional and micromechanical fracture models.” Eng. Struct. 30 (11): 3325–3335. https://doi.org/10.1016/j.engstruct.2008.05.014.
Kaufmann, E. J., J. W. Fisher, R. M. Di Julio, and J. L. Gross. 1997. Failure analysis of welded steel moment frames damaged in the Northridge earthquake. Gaithersburg, MD: National Institute of Standards and Technology.
Kaufmann, E. J., M. Xue, L.-W. Lu, and J. W. Fisher. 1996. “Achieving ductile behavior of moment connections.” Mod. Steel Constr. 36 (1): 30–39.
Kirk, M. 2002. The technical basis for application of the master curve to the assessment of nuclear reactor pressure vessel integrity. Washington, DC: United States Nuclear Regulatory Commission.
Maison, B., K. Kasai, R. J. Dexter, A. Ingraffea, and G. G. Deierlein. 1996. Selected results from the SAC phase 1 beam-column connection pre-test analyses. Sacramento, CA: SAC Joint Venture.
McMeeking, R., and D. Parks. 1979. “On criteria for J-dominance of crack-tip fields in large-scale yielding.” Elastic-Plast. Fract. 668 (Jun): 175–194. https://doi.org/10.1520/STP35830S.
Nudel, A., M. Dana, and L. Maclise. 2013. “Adaptive reuse: Creating a New School of Dentistry in an Outdated Urban Office Building.” In Proc., SEAOC 2013. Sacramento, CA: Structural Engineers Association of California.
Nuttayasakul, N. 2000. Finite element fracture mechanics study of partial penetration welded splice. Stanford, CA: Stanford Univ.
Rice, J. R., and G. F. Rosengren. 1968. “Plane strain deformation near a crack tip in a power-law hardening material.” J. Mech. Phys. Solids 16 (1): 1–12. https://doi.org/10.1016/0022-5096(68)90013-6.
SAC Joint Venture. 1995a. Analytical and field investigations of buildings affected by the Northridge earthquake of January 17, 1994. Sacramento, CA: SAC Joint Venture.
SAC Joint Venture. 1995b. Technical report: Case studies of steel moment-frame building performance in the Northridge earthquake of January 17, 1994. Sacramento, CA: SAC Joint Venture.
SAC Joint Venture. 2000a. Recommended seismic design criteria for new steel moment-frame buildings. Sacramento, CA: SAC Joint Venture.
SAC Joint Venture. 2000b. Recommended seismic evaluation and upgrade criteria for existing welded steel moment-frame buildings. Sacramento, CA: SAC Joint Venture.
Shaw, S. M., K. Stillmaker, and A. M. Kanvinde. 2015. “Seismic response of partial-joint-penetration welded column splices in moment-resisting frames.” Eng. J. 52 (2): 87–108.
Shen, J., T. A. Sabol, B. Akbas, N. Sutchiewcharn, and W. Cai. 2010. “Seismic demand on column splices in steel moment frames.” Eng. J. 47 (4): 223.
Stillmaker, K., A. Kanvinde, and C. Galasso. 2016. “Fracture mechanics-based design of column splices with partial joint penetration welds.” J. Struct. Eng. 142 (2): 04015115. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001380.
Tada, H., P. C. Paris, and G. R. Irwin. 2000. The stress analysis of cracks handbook. New York: ASME Press.
Wallin, K. 1984. “The scatter in KIC-results.” Eng. Fract. Mech. 19 (6): 1085–1093. https://doi.org/10.1016/0013-7944(84)90153-X.
Wallin, K. 1985. “The size effect in KIC results.” Eng. Fract. Mech. 22 (1): 149–163. https://doi.org/10.1016/0013-7944(85)90167-5.
Wallin, K. 1993. “Irradiation damage effects on the fracture toughness transition curve shape for reactor pressure vessel steels.” Int. J. Press. Vessels Pip. 55 (1): 61–79. https://doi.org/10.1016/0308-0161(93)90047-W.
Wallin, K. 1998. Master curve analysis of ductile to brittle transition region fracture toughness round robin data. The “EURO” fracture toughness curve. Otamiemi, Espoo, Finland: VTT Technical Research Centre of Finland.
Information & Authors
Information
Published In
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Jun 11, 2022
Accepted: Jan 24, 2023
Published online: Mar 30, 2023
Published in print: Jun 1, 2023
Discussion open until: Aug 30, 2023
ASCE Technical Topics:
- Columns
- Connections (structural)
- Construction engineering
- Construction methods
- Continuum mechanics
- Cracking
- Engineering fundamentals
- Engineering mechanics
- Finite element method
- Fracture mechanics
- Frames
- Joints
- Material mechanics
- Material properties
- Materials engineering
- Methodology (by type)
- Numerical methods
- Solid mechanics
- Steel columns
- Steel frames
- Structural engineering
- Structural members
- Structural systems
- Toughness
- Welded connections
- Welding
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Hiroshi Yasumoto, Amit Kanvinde, Chia-Ming Uang, Rupa Garai, Simulation-Based Fracture Assessment of Seismic Moment Frame Connections with Box Columns, Journal of Structural Engineering, 10.1061/JSENDH.STENG-13042, 150, 5, (2024).