Self-Centering Rotational Joints for Seismic Resilient Steel Moment Resisting Frame
Publication: Journal of Structural Engineering
Volume 149, Issue 2
Abstract
A novel self-centering rotational joint (SCRJ) was proposed to replace the plastic hinge at the beam end to achieve a seismic resilient frame without diminishing the structural usability. The quasi-static cyclic tests of the SCRJs with different sets of friction components and disc springs were conducted, with the results showing that the precompressive force, stiffness of the compressive force, and slope angle of the right helicoid surfaces can significantly affect the hysteresis behavior. The hysteresis curve of the SCRJ demonstrates a flag shape with four characteristic states: activation state, ultimate state, reversal activation state, and deactivation state. The displacement-based design approach was adopted for the resilient steel moment resisting frame structure with the SCRJs based on which a six-story resilient frame structure was designed with the SCRJs at the beam ends. The nonlinear dynamic analysis shows that the interstory drift ratio and residual interstory drift ratio of the resilient frame structure can meet the design objectives, in which the SCRJs reach the plastic state (caused by geometric nonlinearity) more easily than conventional plastic hinges (caused by material plasticity), resulting in larger deformations, and can effectively dissipate seismic energy and protect the main frame from yielding under the rarely occurring earthquake (ROE) level.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
The test and numerical results are available from the corresponding author upon reasonable request.
Acknowledgments
The authors would like to acknowledge the support from the “National Natural Science Foundation of China (No. 52108440),” “Natural Science Foundation of Jiangsu Province (No. BK20210253),” “Project Funded by China Postdoctoral Science Foundation (No. 2021M690620),” “Jiangsu Planned Projects for Postdoctoral Research Funds (No. 2021K263B),” “Scientific Research Fund of Multi-Functional Shaking Tables Laboratory of Beijing University of Civil Engineering and Architecture (No. 2021MFSTL01),” and “Ministry of Science and Technology of the People’s Republic of China (No. 2018YFE0206100).”
References
Ancheta, T. D., et al. 2014. “NGA-West 2 database.” Earthquake Spectra 30 (3): 989–1005. https://doi.org/10.1193/070913EQS197M.
AQSIQ (Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China). 2005. Disc spring. GB/T 1972-2005. Beijing: AQSIQ.
ASCE. 2014. Seismic evaluation and retrofit of existing buildings. ASCE/SEI 41-13. Reston, VA: ASCE.
Chancellor, N. B., M. R. Eatherton, D. A. Roke, and T. Akbas. 2014. “Self-centering seismic lateral force resisting systems: High performance structures for the city of tomorrow.” Buildings 4 (3): 520–548. https://doi.org/10.3390/buildings4030520.
Christopoulos, C., R. Tremblay, H.-J. Kim, and M. Lacerte. 2008. “Self-centering energy dissipative bracing system for the seismic resistance of structures: Development and validation.” J. Struct. Eng. 134 (1): 96–107. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:1(96).
Dolce, M., and D. Cardone. 2006. “Theoretical and experimental studies for the application of shape memory alloys in civil engineering.” J. Eng. Mater. Technol. 128 (3): 302–311. https://doi.org/10.1115/1.2203106.
Dolce, M., D. Cardone, and R. Marnetto. 2000. “Implementation and testing of passive control devices based on shape memory alloys.” Earthquake Eng. Struct. Dyn. 29 (7): 945–968. https://doi.org/10.1002/1096-9845(200007)29:7%3C945::AID-EQE958%3E3.0.CO;2-.
Eatherton, M. R., and J. F. Hajjar. 2014. “Hybrid simulation testing of a self-centering rocking steel braced frame system.” Earthquake Eng. Struct. Dyn. 43 (11): 1725–1742. https://doi.org/10.1002/eqe.2419.
Eatherton, M. R., X. Ma, H. Krawinkler, G. G. Deierlein, and F. Jerome. 2014. “Quasi-static cyclic behavior of controlled rocking steel frames.” J. Struct. Eng. 140 (11): 04014083. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001005.
Erochko, J., C. Christopoulos, R. Tremblay, and H. J. Kim. 2013. “Shake table testing and numerical simulation of a self-centering energy dissipative braced frame.” Earthquake Eng. Struct. Dyn. 42 (11): 1617–1635. https://doi.org/10.1002/eqe.2290.
Fan, X.-W., L.-H. Xu, and Z.-X. Li. 2018. “Behaviors comparisons and prediction of pre-pressed spring self-centering energy dissipation braces.” Int. J. Struct. Stab. Dyn. 18 (8): 1840006. https://doi.org/10.1142/S0219455418400060.
Garlock, M. M., R. Sause, and J. M. Ricles. 2007. “Behavior and design of post-tensioned steel frame systems.” J. Struct. Eng. 133 (3): 389–399. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:3(389).
Guo, T., J. Wang, Y. Song, W. Xuan, and Y. Chen. 2020. “Self-centering cable brace with friction devices for enhancing seismic performance of RC frame structures.” Eng. Struct. 207 (Mar): 110187. https://doi.org/10.1016/j.engstruct.2020.110187.
Khoo, H.-H., C. Clifton, J. Butterworth, and G. MacReg. 2013. “Experimental study of full-scale self-centering sliding hinge joint connections with friction ring springs.” J. Earthquake Eng. 17 (7): 972–997. https://doi.org/10.1080/13632469.2013.787378.
Khoo, H.-H., C. Clifton, J. Butterworth, G. MacReg, S. Gledhill, and G. Sidwell. 2012. “Development of the self-centering sliding hinge joint with friction ring springs.” J. Constr. Steel Res. 78 (Nov): 201–211. https://doi.org/10.1016/j.jcsr.2012.07.006.
Lin, Y.-C., R. Sause, and J. Ricles. 2013. “Seismic performance of a large-scale steel self-centering moment-resisting frame: MCE hybrid simulations and quasi-static pushover tests.” J. Struct. Eng. 139 (7): 1227–1236. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000661.
MHURD (Ministry of Housing and Urban-Rural Development of China). 2010. Code for seismic design of buildings. GB 50011-2010. Beijing: MHURD.
MHURD (Ministry of Housing and Urban-Rural Development of China). 2017. Standard for design of steel structures. GB 50017-2017. Beijing: MHURD.
Midorikawa, M., T. Azuhata, T. Ishihara, and A. Wada. 2006. “Shaking table tests on seismic response of steel braced frames with column uplift.” Earthquake Eng. Struct. Dyn. 35 (14): 1767–1785. https://doi.org/10.1002/eqe.603.
Priestley, M. J. N. 2002. “Direct displacement-based design of precast/prestressed concrete buildings.” PCI J. 47 (6): 66–79. https://doi.org/10.15554/pcij.11012002.66.79.
Ricles, J. M., R. Sause, S. W. Peng, and L. W. Lu. 2002. “Experimental evaluation of earthquake resistant post-tensioned steel connections.” J. Struct. Eng. 128 (7): 850–859. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:7(850).
Rojas, P., J. M. Ricles, and R. Sause. 2005. “Seismic performance of post-tensioned steel moment resisting frames with friction devices.” J. Struct. Eng. 131 (4): 529–540. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:4(529).
Tremblay, R., M. Lacerte, and C. Christopoulos. 2008. “Seismic response of multistory buildings with self-centering energy dissipative steel braces.” J. Struct. Eng. 134 (1): 108–120. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:1(108).
Xu, G., and A. Li. 2020. “Seismic performance and design approach of unbonded post-tensioned precast sandwich wall structures with friction devices.” Eng. Struct. 204 (Feb): 110037. https://doi.org/10.1016/j.engstruct.2019.110037.
Xu, G., R. Zhang, and A. Li. 2021. “Experimental and numerical investigation of large-scale precast sandwich wall structures with friction devices.” J. Sandwich Struct. Mater. 23 (7): 2736–2771. https://doi.org/10.1177/1099636220907300.
Xu, L., X. Fan, and Z. Li. 2017a. “Experimental behavior and analysis of self-centering steel brace with pre-pressed disc springs.” J. Constr. Steel Res. 139 (Dec): 363–373. https://doi.org/10.1016/j.jcsr.2017.09.021.
Xu, L.-H., X.-W. Fan, and Z.-X. Li. 2017b. “Cyclic behavior and failure mechanism of self-centering energy dissipation braces with pre-pressed combination disc springs.” Earthquake Eng. Struct. Dyn. 46 (7): 1065–1080. https://doi.org/10.1002/eqe.2844.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Mar 5, 2022
Accepted: Oct 11, 2022
Published online: Dec 5, 2022
Published in print: Feb 1, 2023
Discussion open until: May 5, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Tong Guo, Jishuai Wang, Xinqiang Ji, Lianglong Song, Yong Sun, Yunwen Zhang, Seismic Resilience Enhancement of Irregular Space Structure Using Friction-Damped Self-Centering Tension Braces, Journal of Structural Engineering, 10.1061/JSENDH.STENG-13024, 150, 3, (2024).