Evaluation of Material Properties for Historic Steel Bridges
Publication: Journal of Materials in Civil Engineering
Volume 36, Issue 4
Abstract
Evaluating the technical conditions and performance for historic bridges is essential to ensure their structural safety and determine their need for strengthening. This study investigates the first railway steel bridge built in China in 1894, which is listed as a national preservation unit and industrial heritage site. The bridge was not only exposed to years of weather change but also suffered a geological disaster in 1976. In addition, the surroundings have changed, including the construction of new railway lines and scenic areas. Thus, it is imperative to evaluate its technical conditions and performance, particularly its material properties. To this end, evaluation procedures were formulated. First, the material composition, properties, and grades of steel were determined by microstructural analysis: the grade of nonmetallic inclusions in steel was determined by metallographic analysis; the corrosion rate of steel was obtained by electrochemical analysis; and the crystal type, size, element product of the corrosion layer, as well as the fracture type of the steel, were analyzed by phase composition and elemental analysis. Next, the static performance indices of the steel were obtained by mechanical property tests: the hardness value of the steel was obtained from hardness test; the yield and tensile strengths of the steel were obtained from tensile tests; and the fatigue properties of the steel were analyzed through fatigue tests. The S-N curve of the steel was determined by fitting the tested data. This study provides a reference for the evaluation of the technical conditions and performance of historic bridges.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
This research was funded by the National Natural Science Foundation of China (Grant Nos. 51508348 and 51778377), Construction Project of Beijing-Tianjin-Hebei Collaborative Innovation Community (20547601D), and Natural Science Foundation of Hebei Province (Grant Nos. E2017210183 and E2017210191). The financial support is gratefully acknowledged.
References
Alencar, G., A. de Jesus, J. G. S. da Silva, and R. Calçada. 2019. “Fatigue cracking of welded railway bridges: A review.” Eng. Fail. Anal. 104 (Oct): 154–176. https://doi.org/10.1016/j.engfailanal.2019.05.037.
Bouzas, O., B. Conde, M. Cabaleiro, and B. Riveiro. 2022. “A holistic methodology for the non-destructive experimental characterization and reliability-based structural assessment of historical steel bridges.” Eng. Struct. 270 (Nov): 114867. https://doi.org/10.1016/j.engstruct.2022.114867.
Committee on Fatigue and Fracture Reliability of the Committee on Structural Safety and Reliability of the Structural Division, ASCE. 1982. “Fatigue reliability: Introduction.” J. Struct. Div. 108 (1): 3–23. https://doi/10.1061/JSDEAG.0005869.
CQS (State Bureau of Quality and Technical Supervision). 2001. Test method for fatigue crack growth rate of metallic materials: Part 6. [In Chinese.] GB/T 6398-2000. Beijing: China Standard Press.
EDCJHT (Editorial Department of China Journal of Highway and Transport). 2021. “Review on China’s bridge engineering research: 2021.” [In Chinese.] China J. Highway Transp. 34 (2): 1–97. https://doi.org/10.19721/j.cnki.1001-7372.2021.02.001.
Feng, D. S. 2019. “Study on fatigue properties of Q345B steel after neutral salt spray corrosion.” [In Chinese.] Master’s thesis, Dept. of Architecture and Civil Engineering, China Univ. of Mining and Technology.
Fisher, J. W. 1989. Fatigue and fracture of steel bridges. New York: John Wiley & Sons.
Guo, H. C., K. H. Mao, Y. H. Liu, and L. Gang. 2019. “Experimental study on fatigue performance of Q460 and Q690 steel bolted connections.” Thin-Walled Struct. 138 (May): 243–251. https://doi.org/10.1016/j.tws.2019.02.011.
ISO. 2012. Metallic materials-fatigue testing-statistical planning and analysis of data: Part 5. Amsterdam, Netherlands: ISO.
Li, H. Y. 2020. “Experimental research and theoretical analysis of corrosion fatigue life and fatigue mechanism of Q235B steel.” [In Chinese.] Ph.D. thesis, School of Civil Engineering, Taiyuan Univ. of Technology.
Liao, C. J., J. Yang, Y. He, and X. Z. Ming. 2015. “Electrochemical corrosion behavior of the carburized porous TiAl alloy.” J. Alloys Compd. 619 (Jan): 221–227. https://doi.org/10.1016/j.jallcom.2014.08.021.
Ling, S. 1994. “Mechanical properties test of metallic materials lecture 6 fatigue test.” In Physicochemical test, 56–60. Shanghai, China: Shanghai Research Institute of Materials.
MOR (Ministry of Railways of the People’s Republic of China). 2020. Railway bridge verification specification: Part 4. [In Chinese.] Beijing: China Railway Publishing House.
NRA (National Railway Administration of People’s Republic of China). 2020. Structural steel for railway bridges: Part 6. [In Chinese.] TB/T 3556-2020. Beijing: China Railway Press.
Otegui, J. L., H. W. Kerr, D. J. Burns, and U. H. Mohaupt. 1989. “Fatigue crack initiation from defects at weld toes in steel.” Int. J. Press. Vessels Pip. 38 (5): 385–417. https://doi.org/10.1016/0308-0161(89)90048-3.
SAC (Standardization Administration of PRC) and AQSIQ (General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China). 2005. Steel-Determination of content of nonmetallic inclusions—Microscopic method using standards diagrams: Part 2. [In Chinese.] GB/T 10561-2005. Beijing: China Standards Publishing House.
SAC (Standardization Administration of PRC) and AQSIQ (General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China). 2008. Metal material fatigue test axial force control method. [In Chinese.] GB/T 3075-2008. Beijing: China Standards Press.
SAC (Standardization Administration of PRC) and AQSIQ (General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China). 2010. Metallic materials-Tensile test-Part 1: Method of test at room temperature. [In Chinese.] GB/T 228.1-2010. Beijing: China Standard Press.
SAC (Standardization Administration of PRC) and AQSIQ (General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China). 2018. Steel and steel products-Location and preparation of samples and test pieces for mechanical testing. Appendix A Part 5. [In Chinese.] GB/T 2975-2018. Beijing: China Standards Publishing House.
SAMR (State Administration for Market Regulation) and SAC (Standardization Administration of PRC). 2023. Determination of non-metallic inclusion content in steel-Standard grading diagram microscopic inspection method: Part 4. [In Chinese.] GB/T 10561-2023. Beijing: China Standards Publishing House.
Shi, G., and J. Zhang. 2014. “Fatigue test of high strength steel Q460D.” [In Chinese.] Ind. Build. 44 (3): 6.
Shi, Y. J. 2005. “Residue fatigue life evaluation and fatigue reliability analysis of existing steel highway bridge.” [In Chinese.] Master’s thesis, Structural Engineering, Xi’an Univ. of Architecture and Technology.
Sun, B. L. 2013. “Electrochemical corrosion characteristics of low carbon alloy steel in NaCl solution.” [In Chinese.] Ph.D. thesis, School of Materials Science and Engineering, Anhui Univ. of Technology.
Information & Authors
Information
Published In
Copyright
© 2024 American Society of Civil Engineers.
History
Received: Jun 22, 2023
Accepted: Oct 13, 2023
Published online: Jan 30, 2024
Published in print: Apr 1, 2024
Discussion open until: Jun 30, 2024
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.