Performance of Lightweight Peach-Shell Concrete with Optimal Substitution Ratio
Publication: Journal of Materials in Civil Engineering
Volume 36, Issue 5
Abstract
Peach shell, a distinctive agricultural residue in China, exhibits the potential to substitute concrete aggregates, facilitating the creation of eco-lightweight concrete. This study determines the optimal volume substitution rate based on strength and density for peach-shell concrete. It delves into microscopic features, hydration outcomes, mechanical traits, sound absorption, impermeability, and techniques to enhance the impermeability. The outcomes reveal that peach-shell concrete’s compressive, flexural, and splitting tensile properties are comparatively lower than ordinary concrete due to reduced peach-shell aggregate, cement paste, and interfacial bonding strength. However, it excels in sound absorption owing to larger biological pores. While its impermeability trails ordinary concrete, polyvinyl alcohol coating proves effective for improvement. In essence, this research comprehensively examines peach-shell concrete’s attributes, offering insights for practical applications of lightweight peach-shell concrete.
Practical Applications
As the planet warms up and its impact on our future becomes more apparent, many researchers have been working on finding ways to use building materials that help cut down on carbon emissions. One effective strategy is adding biochar to concrete, which is exactly what this article looks into. It is all about how replacing a significant portion of the concrete aggregate with peach shells—a type of agricultural waste in China—affects the concrete’s physical, mechanical, and acoustic properties, and how well it resists water seepage. What the article discovered is that this peach-shell concrete is not as strong when it comes to bearing weight, pulling forces, or bending. Additionally, it is not as watertight. But here is the upside: it is lighter in weight and can soak up sound better. This means it could be a good option for making lightweight walls inside buildings that do not have to hold heavy loads. The whole point of this paper is to explore whether we can create useful lightweight concrete using peach shells.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
Thanks to the help provided by Teacher Ai Ting of the Civil Engineering Laboratory of Sichuan University. This work was funded by Research Fund of The State Key Laboratory of Coal Resources and safe Mining, CUMT (SKLCRSM23KF013) and Sichuan Provincial Engineering Research Center of City Solid Waste Energy and Building Materials Conversion and Utilization Technology (GF2023ZD003).
Author contributions: Shun Kang: investigation, conceptualization, methodology, writing-original draft, and visualization. Haikuan Wu: investigation, and data curation. Zhihao He: conceptualization, supervision, and writing—review and editing. Rong Deng: writing—review and editing, and translation. Changwu Liu: writing—review and editing.
References
ACI (American Concrete Institute). 2003. Guide for structural lightweight aggregate concrete. ACI 213R-03. Farmington Hills, MI: ACI.
Ahmad, J., O. Zaid, F. Aslam, M. Shahzaib, R. Ullah, H. Alabduljabbar, and K. M. Khedher. 2021. “A study on the mechanical characteristics of glass and nylon fiber reinforced peach shell lightweight concrete.” Materials 14 (16): 4488. https://doi.org/10.3390/ma14164488.
Akbarpour, A., and M. Mahdikhani. 2023. “Effects of natural zeolite and sulfate environment on mechanical properties and permeability of cement-bentonite cutoff wall.” Eur. J. Environ. Civ. Eng. 27 (3): 1165–1178. https://doi.org/10.1080/19648189.2022.2075940.
Akbarpour, A., M. Mahdikhani, and R. Z. Moayed. 2022a. “Effects of natural zeolite and sulfate ions on the mechanical properties and microstructure of plastic concrete.” Front. Struct. Civ. Eng. 16 (1): 86–98. https://doi.org/10.1007/s11709-021-0793-x.
Akbarpour, A., M. Mahdikhani, and R. Z. Moayed. 2022b. “Mechanical behavior and permeability of plastic concrete containing natural zeolite under triaxial and uniaxial compression.” J. Mater. Civ. Eng. 34 (2): 04021453. https://doi.org/10.1061/(ASCE)MT.1943-5533.0004093.
Alghunaim, A., S. Kirdponpattara, and B. M. Z. Newby. 2016. “Techniques for determining contact angle and wettability of powders.” Powder Technol. 287 (Jan): 201–215. https://doi.org/10.1016/j.powtec.2015.10.002.
Aslam, M., P. Shafigh, and M. Z. Jumaat. 2016a. “Drying shrinkage behaviour of structural lightweight aggregate concrete containing blended oil palm bio-products.” J. Cleaner Prod. 127 (Jul): 183–194. https://doi.org/10.1016/j.jclepro.2016.03.165.
Aslam, M., P. Shafigh, M. Z. Jumaat, and M. Lachemi. 2016b. “Benefits of using blended waste coarse lightweight aggregates in structural lightweight aggregate concrete.” J. Cleaner Prod. 119 (Apr): 108–117. https://doi.org/10.1016/j.jclepro.2016.01.071.
ASTM. 2005. Standard test method for scanning electron microscope (SEM) analysis of metallic surface condition for gas distribution system. ASTM F1372-93. West Conshohocken, PA: ASTM.
ASTM. 2011. Standard specification for lightweight aggregates for structural concretee. ASTM C330-05. West Conshohocken, PA: ASTM.
Basheer, L., J. Kropp, and D. J. Cleland. 2001. “Assessment of the durability of concrete from its permeation properties: A review.” Constr. Build. Mater. 15 (2–3): 93–103. https://doi.org/10.1016/S0950-0618(00)00058-1.
Etxeberria, M., E. Vázquez, A. Marí, and M. Barra. 2007. “Influence of amount of recycled coarse aggregates and production process on properties of recycled aggregate concrete.” Cem. Concr. Res. 37 (5): 735–742. https://doi.org/10.1016/j.cemconres.2007.02.002.
Fan, W., C. Liu, Z. Diao, F. Bo, S. Wei, X. Li, and Z. Shuang. 2018a. “Improvement of mechanical properties in polypropylene- and glass-fibre-reinforced peach shell lightweight concrete.” Adv. Mater. Sci. Eng. 2018 (Feb): 1–11. https://doi.org/10.1155/2018/6250941.
Fan, W., C. Liu, L. Zhang, Y. Lu, and Y. Ma. 2018b. “Comparative study of carbonized peach shell and carbonized apricot shell to improve the performance of lightweight concrete.” Constr. Build Mater. 188 (Nov): 758–771. https://doi.org/10.1016/j.conbuildmat.2018.08.094.
Gu, L., and T. Ozbakkaloglu. 2016. “Use of recycled plastics in concrete: A critical review.” Waste Manage. 51 (May): 19–42. https://doi.org/10.1016/j.wasman.2016.03.005.
Hong, L., X. L. Gu, F. Lin, P. Gao, and L. Z. Sun. 2019. “Effects of coarse aggregate form, angularity, and surface texture on concrete mechanical performance.” J. Mater. Civ. Eng. 31 (10): 04019226. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002849.
Kazemi, M., M. Hajforoush, P. K. Talebi, M. Daneshfar, A. Shokrgozar, S. Jahandari, M. Saberian, and J. Li. 2020. “In-situ strength estimation of polypropylene fibre reinforced recycled aggregate concrete using Schmidt rebound hammer and point load test.” J. Sustainable Cem.-Based Mater. 9 (5): 289–306. https://doi.org/10.1080/21650373.2020.1734983.
Liu, P. 2016. “Research on the development of peach industry in Heibei Province.” Master’s thesis, College of Resources and Environment, Hebei Agricultural Univ.
Mannan, M. A., and C. Ganapathy. 2004. “Concrete from an agricultural waste-oil palm shell (OPS).” Build. Environ. 39 (4): 441–448. https://doi.org/10.1016/j.buildenv.2003.10.007.
Mehta, A., and D. K. Ashish. 2020. “Silica fume and waste glass in cement concrete production: A review.” J. Build. Eng. 29 (May): 100888. https://doi.org/10.1016/j.jobe.2019.100888.
Mindess, S. 1987. “Bonding in cementitious composites: How important is it?” MRS Online Proc. Lib. 114 (1): 3–10. https://doi.org/10.1557/PROC-114-3.
Moradllo, M. K., B. Sudbrink, and M. T. Ley. 2016. “Determining the effective service life of silane treatments in concrete bridge decks.” Constr. Build. Mater. 116 (Jul): 121–127. https://doi.org/10.1016/j.conbuildmat.2016.04.132.
Olanipekun, E. A., K. O. Olusola, and O. Ata. 2006. “A comparative study of concrete properties using coconut shell and palm kernel shell as coarse aggregates.” Build. Environ. 41 (3): 297–301. https://doi.org/10.1016/j.buildenv.2005.01.029.
Park, S. B., D. S. Seo, and J. Lee. 2005. “Studies on the sound absorption characteristics of porous concrete based on the content of recycled aggregate and target void ratio.” Cem. Concr. Res. 35 (9): 1846–1854. https://doi.org/10.1016/j.cemconres.2004.12.009.
Reading, T. J., R. F. Adams, B. D. Barnes, R. A. Burmeister, K. C. Clear, H. K. Cook, W. A. Cordon, B. Erlin, E. Farkas, and H. Famili. 1977. “Guide to durable concrete.” J. Am. Concr. Inst. 74 (12): 573–581.
Selcuk, L., and H. S. Gke. 2015. “Estimation of the compressive strength of concrete under point load and its approach to strength criterions.” KSCE J. Civ. Eng. 19 (6): 1767–1774. https://doi.org/10.1007/s12205-015-1303-2.
Shafigh, P., H. Bin Mahmud, M. Z. Jumaat, and M. Zargar. 2014. “Agricultural wastes as aggregate in concrete mixtures: A review.” Constr. Build. Mater. 53 (Feb): 110–117. https://doi.org/10.1016/j.conbuildmat.2013.11.074.
Sharma, R., and P. P. Bansal. 2016. “Use of different forms of waste plastic in concrete: A review.” J. Cleaner Prod. 112 (Part 1): 473–482. https://doi.org/10.1016/j.jclepro.2015.08.042.
Shen, L., H. Jiang, T. Wang, K. H. Chen, and H. Zhang. 2019. “Performance of silane: Based surface treatments for protecting degraded historic concrete.” Prog. Org. Coat. 129 (Apr): 209–216. https://doi.org/10.1016/j.porgcoat.2019.01.016.
Shi, C. J., Y. K. Li, J. K. Zhang, W. G. Li, L. L. Chong, and Z. B. Xie. 2016. “Performance enhancement of recycled concrete aggregate: A review.” J. Cleaner Prod. 112 (Part 1): 466–472. https://doi.org/10.1016/j.jclepro.2015.08.057.
Sudbrink, B., M. K. Moradllo, Q. N. Hu, M. T. Ley, J. M. Davis, N. Materer, and A. Apblett. 2017. “Imaging the presence of silane coatings in concrete with micro X-ray fluorescence.” Cem. Concr. Res. 92 (Feb): 121–127. https://doi.org/10.1016/j.cemconres.2016.11.019.
Tie, T. S., K. H. Mo, A. Putra, S. C. Loo, and T. C. Ling. 2020. “Sound absorption performance of modified concrete: A review.” J. Build. Eng. 30 (Jul): 101219. https://doi.org/10.1016/j.jobe.2020.101219.
Wiley-VCH. 2011. Ullmann’s encyclopedia of industrial chemistry. Hoboken, NJ: Wiley.
Wu, F., C. Liu, W. Sun, and L. Zhang. 2018. “Mechanical properties of bio-based concrete containing blended peach shell and apricot shell waste.” Material. Tehnol. 52 (5): 645–651. https://doi.org/10.17222/mit.2018.065.
Xiao, J., J. Li, and C. Zhang. 2005. “Mechanical properties of recycled aggregate concrete under uniaxial loading.” Cem. Concr. Res. 35 (6): 1187–1194. https://doi.org/10.1016/j.cemconres.2004.09.020.
Zhang, L. H., L. J. J. Catalan, R. J. Balec, A. C. Larsen, H. H. Esmaeili, and S. D. Kinrade. 2010. “Effects of saccharide set retarders on the hydration of ordinary Portland cement and pure tricalcium silicate.” J. Am. Ceram. Soc. 93 (1): 279–287. https://doi.org/10.1111/j.1551-2916.2009.03378.x.
Zhang, Y., H. Li, A. Abdelhady, and H. W. Du. 2020a. “Laboratorial investigation on sound absorption property of porous concrete with different mixtures.” Constr. Build. Mater. 259 (Oct): 120414. https://doi.org/10.1016/j.conbuildmat.2020.120414.
Zhang, Y., H. Li, A. Abdelhady, and J. Yang. 2020b. “Effect of different factors on sound absorption property of porous concrete.” Trans. Res. Part D Trans. Environ. 87 (Oct): 102532. https://doi.org/10.1016/j.trd.2020.102532.
Information & Authors
Information
Published In
Copyright
© 2024 American Society of Civil Engineers.
History
Received: Jun 4, 2023
Accepted: Oct 27, 2023
Published online: Feb 24, 2024
Published in print: May 1, 2024
Discussion open until: Jul 24, 2024
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.