Influence of Fly-Ash Reaction on the Performance of Coal-Derived Char Bricks
Publication: Journal of Materials in Civil Engineering
Volume 35, Issue 10
Abstract
Studies have been conducted to expand the application of coal and coal by-products to building materials and other commodities. Researchers have presented the development of char brick from coal and coal by-products, but the methodology presented is time consuming, expensive, and not feasible. This study presents the development of char bricks from coal-derived pyrolyzed char and fly ash (FA) using the traditional mixing method, which is effective, economical, and less time consuming. This work considered different curing conditions to understand the mechanism of interaction of the char with the FA. The properties of the char brick are quantified using different methods such as X-ray diffraction, Fourier transform infrared spectrometer (FTIR), thermogravimetric analysis, compressive strength, and thermal conductivity. The outcome of this study shows that the compressive strength of char brick exceeds the minimum 14 MPa for buildings with the addition of FA, a higher thermal insulation to improve the building energy efficiency, and a lower bulk density to reduce overall building loads and construction costs.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The authors are grateful for support from the Wyoming State Legislator through the School of Energy Resources of the University of Wyoming.
References
Abdel-Fattah, W. I., and M. Selim. 1982. “Kinetics of the thermal decomposition of animal bone char.” Thermochim. Acta 56 (3): 345–357. https://doi.org/10.1016/0040-6031(82)87042-1.
Abdel-Gawwad, H. A., A. M. Rashad, M. S. Mohammed, and T. A. Tawfik. 2021. “The potential application of cement kiln dust-red clay brick waste-silica fume composites as unfired building bricks with outstanding properties and high ability to CO2-capture.” J. Build. Eng. 42 (Jun): 102479. https://doi.org/10.1016/j.jobe.2021.102479.
Alarcon-Ruiz, L., G. Platret, E. Massieu, and A. Ehrlacher. 2005. “The use of thermal analysis in assessing the effect of temperature on a cement paste.” Cem. Concr. Res. 35 (3): 609–613. https://doi.org/10.1016/j.cemconres.2004.06.015.
Aligizaki, K. K. 2005. Pore structure of cement-based materials: Testing, interpretation and requirements. London: CRC Press.
Brouwers, H., and R. Van Eijk. 2003. “Chemical reaction of fly ash.” In Proc., 11th Int. Congress on the Chemistry of Cement (ICCC). Durban, South Africa: The Cement and Concrete Institute of South Africa.
Celik, O., E. Damcı, and S. Pişkin. 2008. “Characterization of fly ash and it effects on the compressive strength properties of Portland cement.” Indian J. Eng. Mater. Sci. 15 (Oct): 433–440.
Criado, M., A. F. Jiménez, I. Sobrados, A. Palomo, and J. Sanz. 2012. “Effect of relative humidity on the reaction products of alkali activated fly ash.” J. Eur. Ceram. Soc. 32 (11): 2799–2807. https://doi.org/10.1016/j.jeurceramsoc.2011.11.036.
Cyr, M., P. Lawrence, and E. Ringot. 2006. “Efficiency of mineral admixtures in mortars: Quantification of the physical and chemical effects of fine admixtures in relation with compressive strength.” Cem. Concr. Res. 36 (2): 264–277. https://doi.org/10.1016/j.cemconres.2005.07.001.
Demirboğa, R., and R. Gül. 2003. “The effects of expanded perlite aggregate, silica fume and fly ash on the thermal conductivity of lightweight concrete.” Cem. Concr. Res. 33 (5): 723–727. https://doi.org/10.1016/S0008-8846(02)01032-3.
Deschner, F., F. Winnefeld, B. Lothenbach, S. Seufert, P. Schwesig, S. Dittrich, F. Goetz-Neunhoeffer, and J. Neubauer. 2012. “Hydration of Portland cement with high replacement by siliceous fly ash.” Cem. Concr. Res. 42 (10): 1389–1400. https://doi.org/10.1016/j.cemconres.2012.06.009.
Elavarasan, S., A. Priya, and V. K. Kumar. 2021. “Manufacturing fired clay brick using fly ash and M− Sand.” Mater. Today: Proc. 37 (Aug): 872–876. https://doi.org/10.1016/j.matpr.2020.06.042.
Fan, Y., S. Yin, Z. Wen, and J. Zhong. 1999. “Activation of fly ash and its effects on cement properties.” Cem. Concr. Res. 29 (4): 467–472. https://doi.org/10.1016/S0008-8846(98)00178-1.
Fauzi, A., M. F. Nuruddin, A. B. Malkawi, and M. M. A. B. Abdullah. 2016. “Study of fly ash characterization as a cementitious material.” Procedia Eng. 148 (6): 487–493. https://doi.org/10.1016/j.proeng.2016.06.535.
Fraay, A., J. Bijen, and Y. De Haan. 1989. “The reaction of fly ash in concrete a critical examination.” Cem. Concr. Res. 19 (2): 235–246. https://doi.org/10.1016/0008-8846(89)90088-4.
Fu, X., and D. Chung. 1997. “Effects of silica fume, latex, methylcellulose, and carbon fibers on the thermal conductivity and specific heat of cement paste.” Cem. Concr. Res. 27 (12): 1799–1804. https://doi.org/10.1016/S0008-8846(97)00174-9.
Garrault, S., and A. Nonat. 2001. “Hydrated layer formation on tricalcium and dicalcium silicate surfaces: Experimental study and numerical simulations.” Langmuir 17 (26): 8131–8138. https://doi.org/10.1021/la011201z.
Ghosh, K., and P. Ghosh. 2020. Alkali activated fly ash: Blast furnace slag composites. London: CRC Press.
Godby, R., R. Coupal, D. Taylor, and T. Considine. 2015. “Potential impacts on Wyoming coal production of EPA’s greenhouse gas proposals.” Electricity J. 28 (5): 68–79. https://doi.org/10.1016/j.tej.2015.05.004.
Gupta, V., S. Siddique, and S. Chaudhary. 2021. “Optimum mixing sequence and moisture content for hydrated lime fly ash bricks.” J. Cleaner Prod. 285 (6): 124859. https://doi.org/10.1016/j.jclepro.2020.124859.
Halloran, J. W., and Z. Guerra. 2011. “Carbon building materials from coal char: Durable materials for solid carbon sequestration to enable hydrogen production by coal pyrolysis.” Mater. Challenges Alter. Renewable Energy 224 (21): 61. https://doi.org/10.1002/9781118019467.ch6.
Han, Y., R.-S. Lin, and X.-Y. Wang. 2022. “Compressive strength estimation and CO2 reduction design of fly ash composite concrete.” Buildings 12 (2): 139. https://doi.org/10.3390/buildings12020139.
Heydari, M., M. Rahman, and R. Gupta. 2015. “Kinetic study and thermal decomposition behavior of lignite coal.” Int. J. Chem. Eng. 2015 (1). 1–9. https://doi.org/10.1155/2015/481739.
Hou, F., J. Jin, D. Liu, H. Yang, X. Kou, and Y. Wang. 2020. “Understanding the interaction mechanism of char and CaSO4 oxygen carrier in chemical looping combustion: Semi-empirical tight-binding method calculation and grand Canonical Monte Carlo simulation.” Energy Fuels 34 (7): 8600–8607. https://doi.org/10.1021/acs.energyfuels.0c01030.
Ibraheem, S., O. Standard, P. Koshy, S. Devasahyam, and S. Bandyopadhyay. 2016. “SEM study of debonding/pull-out features & FTIR analysis of bonding in fly ash-epoxy particulate composites.” Int. J. Enhanced Res. Sci. Technol. Eng. 5 (3): 230–244.
Jaworska-Wędzińska, M., and I. Jasińska. 2022. “Durability of mortars with fly ash subject to freezing and thawing cycles and sulfate attack.” Materials 15 (1): 220. https://doi.org/10.3390/ma15010220.
Jeyageetha, C., and S. P. Kumar. 2016. “Study of SEM/EDXS and FTIR for fly ash to determine the chemical changes of ash in marine environment.” Int. J. Sci. Res. 5 (6): 1688–1692.
Jiang, T., S. Liu, F. AlMutawa, J. E. Tanner, and G. Tan. 2019. “Comprehensive reuse of pyrolysis chars from coals for fabrication of highly insulating building materials.” J. Cleaner Prod. 222 (Jan): 424–435. https://doi.org/10.1016/j.jclepro.2019.03.048.
Joseph, G., and K. Ramamurthy. 2009. “Influence of fly ash on strength and sorption characteristics of cold-bonded fly ash aggregate concrete.” Constr. Build. Mater. 23 (5): 1862–1870. https://doi.org/10.1016/j.conbuildmat.2008.09.018.
Katara, S., S. Kabra, A. Sharma, R. Hada, and A. Rani. 2013. “Surface modification of fly ash by thermal activation: A DR/FTIR study.” Int. J. Pure Appl. Chem. 3 (4): 299–307. https://doi.org/10.9734/IRJPAC/2013/4287.
Kontoleontos, F., P. Tsakiridis, A. Marinos, N. Katsiotis, V. Kaloidas, and M. Katsioti. 2013. “Dry-grinded ultrafine cements hydration. physicochemical and microstructural characterization.” Mater. Res. 16 (2): 404–416. https://doi.org/10.1590/S1516-14392013005000014.
Kumar, R., V. Patyal, B. Lallotra, and D. K. Ashish. 2014. “Study of properties of light weight fly ash brick.” Int. J. Eng. Res. Appl. 2014 (1): 49–53.
Larkin, P. 2017. Infrared and Raman spectroscopy: Principles and spectral interpretation. New York: Elsevier.
Lin, K. L. 2006. “Feasibility study of using brick made from municipal solid waste incinerator fly ash slag.” J. Hazard. Mater. 137 (3): 1810–1816. https://doi.org/10.1016/j.jhazmat.2006.05.027.
Luxán, M. P., D. De Rojas, and M. Frías. 1989. “Investigations on the fly ash-calcium hydroxide reactions.” Cem. Concr. Res. 19 (1): 69–80. https://doi.org/10.1016/0008-8846(89)90067-7.
Maciel, M. H., G. S. Soares, R. C. de Oliveira Romano, and M. A. Cincotto. 2019. “Monitoring of Portland cement chemical reaction and quantification of the hydrated products by XRD and TG in function of the stoppage hydration technique.” J. Therm. Anal. Calorim. 136 (3): 1269–1284. https://doi.org/10.1007/s10973-018-7734-5.
Maltais, Y., and J. Marchand. 1997. “Influence of curing temperature on cement hydration and mechanical strength development of fly ash mortars.” Cem. Concr. Res. 27 (7): 1009–1020. https://doi.org/10.1016/S0008-8846(97)00098-7.
Moon, G. D., S. Oh, and Y. C. Choi. 2016. “Effects of the physicochemical properties of fly ash on the compressive strength of high-volume fly ash mortar.” Constr. Build. Mater. 124 (Apr): 1072–1080. https://doi.org/10.1016/j.conbuildmat.2016.08.148.
Narattha, C., and A. Chaipanich. 2018. “Phase characterizations, physical properties and strength of environment-friendly cold-bonded fly ash lightweight aggregates.” J. Cleaner Prod. 171 (9): 1094–1100. https://doi.org/10.1016/j.jclepro.2017.09.259.
Narmluk, M., and T. Nawa. 2011. “Effect of fly ash on the kinetics of Portland cement hydration at different curing temperatures.” Cem. Concr. Res. 41 (6): 579–589. https://doi.org/10.1016/j.cemconres.2011.02.005.
Papadakis, V. G. 1999. “Effect of fly ash on Portland cement systems: Part I. Low-calcium fly ash.” Cem. Concr. Res. 29 (11): 1727–1736. https://doi.org/10.1016/S0008-8846(99)00153-2.
Puglisi, C., L. Sturiale, and G. Montaudo. 1999. “Thermal decomposition processes in aromatic polycarbonates investigated by mass spectrometry.” Macromolecules 32 (7): 2194–2203. https://doi.org/10.1021/ma981238z.
Quennoz, A., and K. L. Scrivener. 2012. “Hydration of C3A–gypsum systems.” Cem. Concr. Res. 42 (7): 1032–1041. https://doi.org/10.1016/j.cemconres.2012.04.005.
Rafieizonooz, M., J. Mirza, M. R. Salim, M. W. Hussin, and E. Khankhaje. 2016. “Investigation of coal bottom ash and fly ash in concrete as replacement for sand and cement.” Constr. Build. Mater. 116 (Jun): 15–24. https://doi.org/10.1016/j.conbuildmat.2016.04.080.
Rajamane, N., J. A. Peter, and P. Ambily. 2007. “Prediction of compressive strength of concrete with fly ash as sand replacement material.” Cem. Concr. Compos. 29 (3): 218–223. https://doi.org/10.1016/j.cemconcomp.2006.10.001.
Ramezanianpour, A., and V. Malhotra. 1995. “Effect of curing on the compressive strength, resistance to chloride-ion penetration and porosity of concretes incorporating slag, fly ash or silica fume.” Cem. Concr. Compos. 17 (2): 125–133. https://doi.org/10.1016/0958-9465(95)00005-W.
Rovnaník, P., B. Řezník, and P. Rovnaníková. 2016. “Blended alkali-activated fly ash/brick powder materials.” Procedia Eng. 151 (Aug): 108–113. https://doi.org/10.1016/j.proeng.2016.07.397.
Sakai, E., S. Miyahara, S. Ohsawa, S.-H. Lee, and M. Daimon. 2005. “Hydration of fly ash cement.” Cem. Concr. Res. 35 (6): 1135–1140. https://doi.org/10.1016/j.cemconres.2004.09.008.
Siddique, R. 2003. “Effect of fine aggregate replacement with Class F fly ash on the mechanical properties of concrete.” Cem. Concr. Res. 33 (4): 539–547. https://doi.org/10.1016/S0008-8846(02)01000-1.
Smith, B. 2018. Infrared spectral interpretation: A systematic approach. London: CRC Press.
Suliman, W., J. B. Harsh, N. I. Abu-Lail, A.-M. Fortuna, I. Dallmeyer, and M. Garcia-Pérez. 2017. “The role of biochar porosity and surface functionality in augmenting hydrologic properties of a sandy soil.” Sci. Total Environ. 574 (6): 139–147. https://doi.org/10.1016/j.scitotenv.2016.09.025.
Sun, J., X. Shen, G. Tan, and J. E. Tanner. 2019a. “Compressive strength and hydration characteristics of high-volume fly ash concrete prepared from fly ash.” J. Therm. Anal. Calorim. 136 (2): 565–580. https://doi.org/10.1007/s10973-018-7578-z.
Sun, J., X. Shen, G. Tan, and J. E. Tanner. 2019b. “Modification effects of nano-SiO2 on early compressive strength and hydration characteristics of high-volume fly ash concrete.” J. Mater. Civ. Eng. 31 (6): 04019057. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002665.
Sun, J., Z. Xu, W. Li, and X. Shen. 2017. “Effect of nano-SiO2 on the early hydration of alite-sulphoaluminate cement.” Nanomaterials 7 (5): 102. https://doi.org/10.3390/nano7050102.
Urhan, S. 1987. “Alkali silica and pozzolanic reactions in concrete. Part 1: Interpretation of published results and an hypothesis concerning the mechanism.” Cem. Concr. Res. 17 (1): 141–152. https://doi.org/10.1016/0008-8846(87)90068-8.
Velandia, D. F., C. J. Lynsdale, J. L. Provis, and F. Ramirez. 2018. “Effect of mix design inputs, curing and compressive strength on the durability of Na2SO4-activated high volume fly ash concretes.” Cem. Concr. Compos. 91 (6): 11–20. https://doi.org/10.1016/j.cemconcomp.2018.03.028.
Wang, W.-C. 2017. “Compressive strength and thermal conductivity of concrete with nanoclay under Various High-Temperatures.” Constr. Build. Mater. 147 (5): 305–311. https://doi.org/10.1016/j.conbuildmat.2017.04.141.
Wang, X.-Y., and K.-B. Park. 2015. “Analysis of compressive strength development of concrete containing high volume fly ash.” Constr. Build. Mater. 98 (5): 810–819. https://doi.org/10.1016/j.conbuildmat.2015.08.099.
Wiratmoko, A., and J. W. Halloran. 2009. “Fabricated carbon from minimally processed coke and coal tar pitch as a carbon-sequestering construction material.” J. Mater. Sci. 44 (8): 2097–2100. https://doi.org/10.1007/s10853-008-3174-0.
Xiong, Y., G. Xu, D. Wu, S. Fang, and Y. Tang. 2021. “Investigation of using the ceramic polishing brick powder in engineered cementitious composites.” J. Build. Eng. 43 (Jun): 102489. https://doi.org/10.1016/j.jobe.2021.102489.
Yadav, A. K., and K. Rawat. 2021. “Characterization of fly ash based bricks, alternative to normal clay bricks in building materials and other construction.” IOP Conf. Ser.: Mater. Sci. Eng. 1126: 012045. https://doi.org/10.1088/1757-899X/1126/1/012045.
Zeng, Q., K. Li, T. Fen-Chong, and P. Dangla. 2012. “Pore structure characterization of cement pastes blended with high-volume fly-ash.” Cem. Concr. Res. 42 (1): 194–204. https://doi.org/10.1016/j.cemconres.2011.09.012.
Zhang, Y. M., W. Sun, and H. D. Yan. 2000. “Hydration of high-volume fly ash cement pastes.” Cem. Concr. Compos. 22 (6): 445–452. https://doi.org/10.1016/S0958-9465(00)00044-5.
Zhao, Y., Z. Ma, J. Qiu, X. Sun, and X. Gu. 2021. “Temperature-dependent hydration and mechanical properties of high-volume fly ash cement with chemical additives.” J. Mater. Civ. Eng. 33 (5): 04021065. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003684.
Information & Authors
Information
Published In
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Sep 20, 2022
Accepted: Mar 6, 2023
Published online: Jul 21, 2023
Published in print: Oct 1, 2023
Discussion open until: Dec 21, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Hua Yu, Prayush Jonchhe, Chooikim Lau, Kam Ng, Influence of Coal Char Addition on the Heat of Hydration and Rheological Behavior of Cement Grout, Journal of Materials in Civil Engineering, 10.1061/JMCEE7.MTENG-17532, 36, 8, (2024).