Hot-Water Flooding Investigation in Lithological Heterogeneous Reservoirs Associated with the Evolution of Fluid and Rock Properties
Publication: Journal of Energy Engineering
Volume 151, Issue 1
Abstract
As an emerging energy demand owing to growth in industries and population, understanding hot water injection for the production performance in heterogeneous reservoirs becomes highly essential. The present investigation provides insights into the influence of reservoir rhythm and American Petroleum Institute (API) gravity on hot water flooding. A sensitive study on the order of permeability variation is also performed to understand the extent of hot water flooding. With this intent, we developed an improved fully coupled energy and multiphase flow model associated with the evolution of fluid and rock properties in two-dimensional reservoirs to evaluate hot water flooding scenarios. The lithological heterogeneity of the reservoirs degraded the total oil production rate in contrast to the homogeneous reservoir. Random rhythm reservoir effectively increases the total oil production and is observed to have a cumulative oil production of , which is the highest among other rhythmic reservoirs. Waterfront advancement has reduced in higher API gravity reservoirs; however, more effective oil displacement than lower API gravity reservoirs is experienced, reducing the early water breakthrough phenomenon and increasing the total oil production. The largest cumulative oil production of is observed in the 21° API gravity oil reservoir. The wider variation of the permeability in the reservoir reduced the oil production significantly. The lowest cumulative oil production of is observed in the 2nd order reservoir in contrast to the reservoir, possessing permeability variation by scale factor and 1st order. From the present investigation, it can be interpreted that the lithological heterogeneity can influence the performance of hot water flooding by reducing 5.82%, 6.69%, 7.13%, and 7.91% in random rhythm, compound rhythm, negative rhythm, and positive rhythm reservoir in comparison to the homogeneous reservoir, which is required to design properly to reduce the drastic impacts on the hot water flooding project.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The authors greatly acknowledge the research support from the Indian Institute of Technology, Madras.
References
Ahmed, T., and D. N. Meehan. 2012. Advanced reservoir management and engineering. 2nd ed. Amsterdam, Netherlands: Gulf Professional Publishing.
Alajmi, A. F., R. Gharbi, and M. Algharaib. 2009. “Performance of hot water injection in heterogonous reservoirs using multilateral wells.” In Proc., SPE Saudi Arabia Section Technical Symp. Houston: Society of Petroleum Engineers.
Alajmi, A. F., R. Gharbi, and M. Algharaib. 2014. “The effect of heterogeneity and well configuration on the performance of hot water flood.” J. Pet. Sci. Eng. 122 (Oct): 524–533. https://doi.org/10.1016/j.petrol.2014.08.015.
Alajmi, H. 2013. “Assessment of development methods for a heavy-oil sandstone reservoir.” Doctoral dissertation, Dept. of Earth Science and Engineering, Imperial College London.
Aliyu, M. D., and R. A. Archer. 2021. “A thermo-hydro-mechanical model of a hot dry rock geothermal reservoir.” Renewable Energy 176 (Oct): 475–493. https://doi.org/10.1016/j.renene.2021.05.070.
Almukhametova, E. 2024. “A comparison of current development system indicators for the oil-bearing layers under the abandonment of non-stationary water-flooding and hot water injection technologies.” In Vol. 480 of Proc., E3S Web of Conf., 01017. Les Ulis, France: EDP Sciences.
Bealessio, B. A., N. A. B. Alonso, N. J. Mendes, A. V. Sande, and B. Hascakir. 2021. “A review of enhanced oil recovery (EOR) methods applied in Kazakhstan.” Petroleum 7 (1): 1–9. https://doi.org/10.1016/j.petlm.2020.03.003.
Brooks, R. H., and A. T. Corey. 1964. Hydraulic properties of porous media. Fort Collins, CO: Colorado State Univ.
Buckley, S. E., and M. C. Leverett. 1942. “Mechanism of fluid displacement in sands.” Trans. AIME 146 (1): 107–116. https://doi.org/10.2118/942107-G.
Chu, B., G. Feng, Y. Zhang, S. Qi, P. Li, and T. Huang. 2023. “Residual saturation effects on migration and caprock sealing: A study of permeability and capillary pressure models.” Water 15 (18): 3316. https://doi.org/10.3390/w15183316.
Demirbas, A., H. Alidrisi, and M. A. Balubaid. 2015. “API gravity, sulfur content, and desulfurization of crude oil.” Pet. Sci. Technol. 33 (1): 93–101. https://doi.org/10.1080/10916466.2014.950383.
Department of State Development Energy Resources Division. 2017. South Australia OTWAY BASIN Acreage Release OT2017-A. Washington, DC: US Department of State.
Dong, X., H. Liu, H. Zhang, and Z. Pang. 2011. “Flexibility research of hot-water flooding followed steam injection in heavy oil reservoirs.” In Proc., SPE Enhanced Oil Recovery Conf. Houston: Society of Petroleum Engineers.
Gudala, M., and S. K. Govindarajan. 2021. “Numerical investigations on two-phase fluid flow in a fractured porous medium fully coupled with geomechanics.” J. Pet. Sci. Eng. 199 (Apr): 108328. https://doi.org/10.1016/j.petrol.2020.108328.
Gudala, M., S. K. Govindarajan, B. Yan, and S. Sun. 2022. “Numerical investigations of the PUGA geothermal reservoir with multistage hydraulic fractures and well patterns using fully coupled thermo-hydro-geomechanical modeling.” Energy 253 (Aug): 124173. https://doi.org/10.1016/j.energy.2022.124173.
Guimarães, L. D., L. M. Costa, E. A. Santos, A. P. Costa, and I. D. Pontes Filho. 2002. “Multiphase flow of water and oil in heterogeneous reservoir.” Mecánica Computacional 21 (1): 670–682.
Han, B., H. Gao, Z. Zhai, Y. You, N. Zhang, C. Wang, Z. Cheng, and T. Li. 2024. “Production characteristics and importance of uncertain parameters of water huff-n-puff for volume stimulation horizontal wells in tight oil reservoirs.” J. Energy Eng. 150 (3): 04024008. https://doi.org/10.1061/JLEED9.EYENG-5202.
Helland, J. O., and S. M. Skjæveland. 2006. “Physically based capillary pressure correlation for mixed-wet reservoirs from a bundle-of-tubes model.” SPE J. 11 (2): 171–180. https://doi.org/10.2118/89428-PA.
House, M. A., B. P. Kohn, K. A. Farley, and A. Raza. 2002. “Evaluating thermal history models for the Otway Basin, southeastern Australia, using (U-Th)/He and fission-track data from borehole apatites.” Tectonophysics 349 (1–4): 277–295. https://doi.org/10.1016/S0040-1951(02)00057-4.
Iyi, D., Y. Balogun, B. Oyeneyin, and N. Faisal. 2022. “A numerical study of the effects of temperature and injection velocity on oil-water relative permeability for enhanced oil recovery.” Int. J. Heat Mass Transfer 191 (Aug): 122863. https://doi.org/10.1016/j.ijheatmasstransfer.2022.122863.
Jiang, G., Y. Wang, Y. Shi, C. Zhang, X. Tang, and S. Hu. 2016. “Estimate of hot dry rock geothermal resource in Daqing Oilfield, Northeast China.” Energies 9 (10): 731. https://doi.org/10.3390/en9100731.
Jones, F. E., and G. L. Harris. 1992. “ITS-90 density of water formulation for volumetric standards calibration.” J. Res. Natl. Inst. Stand. Technol. 97 (3): 335. https://doi.org/10.6028/jres.097.013.
Kandala, V., and S. K. Govindarajan. 2023. “Numerical investigations of low-salinity water flooding in a saline sandstone reservoir.” J. Energy Eng. 149 (5): 04023033. https://doi.org/10.1061/JLEED9.EYENG-4893.
Karabayanova, L., A. Ganiyeva, P. Pourafshary, and M. R. Hashmet. 2022. “Application of hybrid low salinity hot water flooding to enhance oil recovery from heavy oil carbonates.” J. Pet. Sci. Eng. 215 (Aug): 110656. https://doi.org/10.1016/j.petrol.2022.110656.
Liu, Z., Q. Wang, W. Luo, M. Gao, and H. Cai. 2020. “A new method for potential evaluation of compound flooding of tertiary oil recovery.” In Vol. 1673 of Proc., Journal of Physics: Conf. Series, 012034. Bristol, UK: IOP Publishing.
Mai, A., and A. Kantzas. 2008. “Improved heavy oil recovery by low rate waterflooding.” In Proc., Int. Thermal Operations and Heavy Oil Symp. Houston: Society of Petroleum Engineers. https://doi.org/10.2118/117648-MS.
Marotto, T. A., and A. P. Pires. 2018. “Mathematical model for one-dimensional oil displacement by steam injection with solvent addition.” J. Pet. Sci. Eng. 169 (Oct): 374–387. https://doi.org/10.1016/j.petrol.2018.05.055.
Masoomi, R., and F. Torabi. 2022. “A new computational approach to predict hot-water flooding (HWF) performance in unconsolidated heavy oil reservoirs.” Fuel 312 (Mar): 122861. https://doi.org/10.1016/j.fuel.2021.122861.
Mishra, A., K. D. Kurtev, and R. R. Haese. 2020. “Composite rock types as part of a workflow for the integration of mm-to cm-scale lithological heterogeneity in static reservoir models.” Mar. Pet. Geol. 114 (Apr): 104240. https://doi.org/10.1016/j.marpetgeo.2020.104240.
Moradi, A., N. A. Samani, A. S. Kumara, and B. M. E. Moldestad. 2022. “Evaluating the performance of advanced wells in heavy oil reservoirs under uncertainty in permeability parameters.” Energy Rep. 8 (Nov): 8605–8617. https://doi.org/10.1016/j.egyr.2022.06.077.
Mortazavi, S. M. S., P. Pirmoradi, and A. R. Khoei. 2022. “Numerical simulation of cold and hot water injection into naturally fractured porous media using the extended–FEM and an equivalent continuum model.” Int. J. Numer. Anal. Methods Geomech. 46 (3): 617–655. https://doi.org/10.1002/nag.3314.
Mwakipunda, G. C., Z. Yang, and C. Guo. 2023. “Infill drilling optimization for enhanced oil recovery by waterflooding: A simulation study.” J. Energy Eng. 149 (1): 04022053. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000860.
Nabizadeh, A., M. Abbasi, J. Siavashi, M. Sharifi, and M. R. K. Movaghar. 2022. “Fluid flow modeling through pressure-dependent porous media: An analytical solution and a computational fluid dynamics approach.” Groundwater Sustainable Dev. 18 (Aug): 100776. https://doi.org/10.1016/j.gsd.2022.100776.
Nassan, T. H. 2018. “Simulation of 1-D heat distribution in heavy oil reservoirs during steam injection process.” In Expert from the Proc., COMSOL Conf. in Lausanne. Stockholm, Sweden: COMSOL.
Niu, B., W. Yan, A. A. Shapiro, and E. H. Stenby. 2009. “Coupling miscible flow and geochemistry for carbon dioxide flooding into north sea chalk reservoir.” In Proc., European Comsol Conf. Stockholm, Sweden: COMSOL.
Pal, N., and A. Mandal. 2021. “Compositional simulation model and history-matching analysis of surfactant-polymer-nanoparticle (SPN) nanoemulsion assisted enhanced oil recovery.” J. Taiwan Inst. Chem. Eng. 122 (May): 1–13. https://doi.org/10.1016/j.jtice.2021.04.022.
Pang, M., J. Ba, and J. M. Carcione. 2021. “Characterization of gas saturation in tight-sandstone reservoirs with rock-physics templates based on seismic Q.” J. Energy Eng. 147 (3): 04021011. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000761.
Pavan, T. N. V., and S. K. Govindarajan. 2023. “Numerical investigations on performance of sc- sequestration associated with the evolution of porosity and permeability in low permeable saline aquifers.” Geoenergy Sci. Eng. 225 (Jun): 211681. https://doi.org/10.1016/j.geoen.2023.211681.
Satter, A., and G. M. Iqbal. 2016. Reservoir fluid properties, Reservoir Engineering. Houston: Gulf Professional Publishing. https://doi.org/10.1016/B978-0-12-800219-3.00004-8.
Stratiev, D., et al. 2023. “Prediction of petroleum viscosity from molecular weight and density.” Fuel 331 (Part 1): 125679. https://doi.org/10.1016/j.fuel.2022.125679.
Wang, F., H. Xu, Y. Liu, Y. Jiang, and C. Wu. 2023. “Experimental study on the enhanced oil recovery mechanism of an ordinary heavy oil field by polymer flooding.” ACS Omega 8 (15): 14089–14096. https://doi.org/10.1021/acsomega.2c08084.
Wang, X., H. Yue, G. Liu, and Z. Zhao. 2011. “The application of COMSOL multiphysics in direct current method forward modeling.” Procedia Earth Planet. Sci. 3 (Jan): 266–272. https://doi.org/10.1016/j.proeps.2011.09.093.
Wu, Z., and H. Liu. 2019. “Investigation of hot-water flooding after steam injection to improve oil recovery in thin heavy-oil reservoir.” J. Pet. Explor. Prod. Technol. 9 (2): 1547–1554. https://doi.org/10.1007/s13202-018-0568-7.
Xiaoxing, L., J. Youwei, W. Yongbin, and W. Jialu. 2018. “A mathematical model and relevant index prediction for constant-temperature electric heating of dual-horizontal-well SAGD start-up.” Pet. Explor. Dev. 45 (5): 895–902. https://doi.org/10.1016/S1876-3804(18)30092-2.
Yang, S., B. Ji, J. Wu, and Y. He. 2024. “Experimental and simulation insights on the high viscosity of heavy oil I: Low-concentration compounds.” Energy 300 (Aug): 131588. https://doi.org/10.1016/j.energy.2024.131588.
Yongmao, H., L. Mingjing, D. Chengshun, J. Jianpeng, S. Yuliang, and S. Guanglong. 2016. “Experimental investigation on oil enhancement mechanism of hot water injection in tight reservoirs.” Open Physics 14 (1): 703–713. https://doi.org/10.1515/phys-2016-0079.
Zargar, Z. 2013. “Modelling of hot water flooding as an enhanced oil recovery method.” Doctoral dissertation, Dept. of Mathematics, Univ. of Reading.
Zhao, D. W., and I. D. Gates. 2015. “On hot water flooding strategies for thin heavy oil reservoirs.” Fuel 153 (Aug): 559–568. https://doi.org/10.1016/j.fuel.2015.03.024.
Zhong, H., Y. He, E. Yang, Y. Bi, and T. Yang. 2022. “Modeling of microflow during viscoelastic polymer flooding in heterogenous reservoirs of Daqing Oilfield.” J. Pet. Sci. Eng. 210 (Mar): 110091. https://doi.org/10.1016/j.petrol.2021.110091.
Information & Authors
Information
Published In
Journal of Energy Engineering
Volume 151 • Issue 1 • February 2025
Copyright
© 2024 American Society of Civil Engineers.
History
Received: May 2, 2024
Accepted: Jul 22, 2024
Published online: Oct 16, 2024
Published in print: Feb 1, 2025
Discussion open until: Mar 16, 2025
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.