Enhanced Mass-Transport Study of Fuel-Cell Gas Diffusion Layer under Nonuniform Assembly Force
Publication: Journal of Energy Engineering
Volume 151, Issue 1
Abstract
This study investigates the impact of nonuniform assembly forces on the mass transfer characteristics of the proton exchange membrane fuel cell. Initially, utilizing a solid mechanics model, the influence of assembly forces on gas diffusion layer (GDL) material properties, including porosity, permeability, and diffusion coefficients, is explored. Under a 2 MPa assembly force, the strain distribution in the GDL exhibits a symmetric structure, with maximum strain occurring below the rib, reaching . This indicates that assembly forces alter the GDL structure, affecting mass transfer characteristics. Comparing material properties under varying assembly forces reveals that, with increasing strain, porosity and permeability gradually decrease while diffusion coefficients increase. This variation positively impacts activation and concentration polarization, particularly enhancing the removal of liquid water. Additionally, the study investigates the effects of different forms of nonuniform assembly forces, such as incremental and decremental forces. Experimental validation confirms the optimization effects of a 2–1.5 MPa decremental assembly force on fuel-cell performance, including enhanced mass transfer rates and reduced ohmic and concentration polarization. This research provides novel insights for fuel-cell design, aiming to improve mass transfer characteristics and overall performance.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code that support the findings of this study are available from the corresponding author upon reasonable request.
References
Arif, M., S. C. P. Cheung, and J. Andrews. 2020. “Influence of hydrophobicity and porosity of the gas diffusion layer on mass transport losses in PEM fuel cells: A simulation study supported by experiments.” Energy Fuels 34 (10): 13010–13022. https://doi.org/10.1021/acs.energyfuels.0c02596.
Cai, Y. H., D. Wu, J. M. Sun, and B. Chen. 2021. “The effect of cathode channel blockages on the enhanced mass transfer and performance of PEMFC.” Energy 222 (May): 119951. https://doi.org/10.1016/j.energy.2021.119951.
Chen, L., R. Lin, M. C. Dong, X. T. Yu, M. Y. Lou, and Z. X. Hao. 2021. “Optimizing the mass-transfer efficiency of a microporous layer for high-performance proton exchange membrane fuel cells.” J. Phys. Chem. C 125 (25): 14122–14133. https://doi.org/10.1021/acs.jpcc.1c03626.
Gao, Y., A. Montana, and F. X. Chen. 2017. “Evaluation of porosity and thickness on effective diffusivity in gas diffusion layer.” J. Power Sources 342 (Feb): 252–265. https://doi.org/10.1016/j.jpowsour.2016.12.052.
García-Salaberri, P. A., M. Vera, and R. Zaera. 2011. “Nonlinear orthotropic model of the inhomogeneous assembly compression of PEM fuel cell gas diffusion layers.” Int. J. Hydrogen Energy 36 (18): 11856–11870. https://doi.org/10.1016/j.ijhydene.2011.05.152.
Gerteisen, D., T. Heilmann, and C. Ziegler. 2008. “Enhancing liquid water transport by laser perforation of a GDL in a PEM fuel cell.” J. Power Sources 177 (2): 348–354. https://doi.org/10.1016/j.jpowsour.2007.11.080.
Hinebaugh, J., Z. Fishman, and A. Bazylak. 2010. “Unstructured pore network modeling with heterogeneous PEMFC GDL porosity distributions.” J. Electrochem. Soc. 157 (11): B1651–B1657. https://doi.org/10.1149/1.3486095.
Huang, B. R., C. Lei, X. M. Sun, L. Luo, G. W. Wang, L. Zhuang, and L. Xiao. 2023. “Improving mass transfer in anion exchange membrane water electrolysis by ordered gas diffusion layer.” Int. J. Hydrogen Energy 48 (91): 35453–35462. https://doi.org/10.1016/j.ijhydene.2023.04.331.
Kanda, D., H. Watanabe, and K. Okazaki. 2013. “Effect of local stress concentration near the rib edge on water and electron transport phenomena in polymer electrolyte fuel cell.” Int. J. Heat Mass Transfer 67 (Dec): 659–665. https://doi.org/10.1016/j.ijheatmasstransfer.2013.08.065.
Ko, D., S. Doh, H. S. Park, and M. H. Kim. 2018. “The effect of through plane pore gradient GDL on the water distribution of PEMFC.” Int. J. Hydrogen Energy 43 (4): 2369–2380. https://doi.org/10.1016/j.ijhydene.2017.12.007.
Li, T. Y., K. J. Wang, J. H. Wang, Y. Q. Liu, Y. F. Han, Z. Y. Xu, G. Y. Lin, and Y. Liu. 2021. “Optimization of GDL to improve water transferability.” Renewable Energy 179 (Dec): 2086–2093. https://doi.org/10.1016/j.renene.2021.08.026.
Liao, J. D., G. G. Yang, S. A. Li, Q. W. Shen, Z. H. Jiang, H. Wang, L. Y. Xu, M. Espinoza-Andaluz, and X. X. Pan. 2021. “Effect of structural parameters on mass transfer characteristics in the gas diffusion layer of proton exchange membrane fuel cells using the lattice Boltzmann method.” Energy Fuels 35 (3): 2654–2664. https://doi.org/10.1021/acs.energyfuels.0c03802.
Liu, H. Z., Z. Y. Hu, J. Q. Li, L. F. Xu, Y. B. Shao, and M. G. Ouyang. 2023. “Investigation on the optimal GDL thickness design for PEMFCs considering channel/rib geometry matching and operating conditions.” Energy 282 (Nov): 128780. https://doi.org/10.1016/j.energy.2023.128780.
Lu, Z. W., C. Kim, A. M. Karlsson, J. C. Cross, and M. H. Santare. 2011. “Effect of gas diffusion layer modulus and land-groove geometry on membrane stresses in proton exchange membrane fuel cells.” J. Power Sources 196 (10): 4646–4654. https://doi.org/10.1016/j.jpowsour.2011.01.028.
Mehrtash, M., I. Tani, and S. Yesilyurt. 2017. “Impacts of inhomogeneous clamping force on local performance and liquid water formation in polymer electrolyte fuel cells.” Int. J. Hydrogen Energy 42 (30): 19227–19245. https://doi.org/10.1016/j.ijhydene.2017.06.139.
Mishra, V., F. Yang, and R. Pitchumani. 2004. “Measurement and prediction of electrical contact resistance between gas diffusion layers and bipolar plate for applications to PEM fuel cells.” J. Fuel Cell Sci. Tech. 1 (1): 2–9. https://doi.org/10.1115/1.1782917.
Pan, W. T., X. L. Chen, F. C. Wang, and G. C. Dai. 2021. “Mass transfer enhancement of PEM fuel cells with optimized flow channel dimensions.” Int. J. Hydrogen Energy 46 (57): 29541–29555. https://doi.org/10.1016/j.ijhydene.2020.09.105.
Park, J., H. Oh, Y. I. Lee, K. Min, E. Lee, and J. Y. Jyoung. 2016. “Effect of the pore size variation in the substrate of the gas diffusion layer on water management and fuel cell performance.” Appl. Energy 171 (Jun): 200–212. https://doi.org/10.1016/j.apenergy.2016.02.132.
Park, S., and B. N. Popov. 2011. “Effect of a GDL based on carbon paper or carbon cloth on PEM fuel cell performance.” Fuel 90 (1): 436–440. https://doi.org/10.1016/j.fuel.2010.09.003.
Shangguan, X., Y. Li, Y. Z. Qin, S. B. Cao, J. F. Zhang, and Y. Yin. 2021. “Effect of the porosity distribution on the liquid water transport in the gas diffusion layer of PEMFC.” Electrochim. Acta 371 (Mar): 137814. https://doi.org/10.1016/j.electacta.2021.137814.
Shi, L., X. W. Tang, S. C. Xu, and Z. Liu. 2024a. “Numerical research on liquid water removal mechanism and the influence of pore structure on water removal rate based on real pore GDL structure during shutdown purge of fuel cell.” Energy 288 (Feb): 129892. https://doi.org/10.1016/j.energy.2023.129892.
Shi, L., X. W. Tang, S. C. Xu, and M. G. Zheng. 2024b. “Comprehensive analysis of shutdown purge influencing factors of proton exchange membrane fuel cell based on water heat transfer and water vapor phase change mechanism.” Appl. Therm. Eng. 239 (Feb): 122175. https://doi.org/10.1016/j.applthermaleng.2023.122175.
Tanuma, T., and S. Kinoshita. 2012. “Impact of gas diffusion layers (GDLs) on water transport in PEFCs.” J. Electrochem. Soc. 159 (2): B150–B154. https://doi.org/10.1149/2.054202jes.
Turkmen, A. C., and C. Celik. 2018. “The effect of different gas diffusion layer porosity on proton exchange membrane fuel cells.” Fuel 222 (Jun): 465–474. https://doi.org/10.1016/j.fuel.2018.02.058.
Wang, Y. L., X. D. Wang, X. A. Wang, T. Liu, T. T. Zhu, S. C. Liu, and Y. Z. Qin. 2021. “Droplet dynamic characteristics on PEM fuel cell cathode gas diffusion layer with gradient pore size distribution.” Renewable Energy 178 (Nov): 864–874. https://doi.org/10.1016/j.renene.2021.06.135.
Xia, L. C., M. Ni, Q. J. He, Q. D. Xu, and C. Cheng. 2021. “Optimization of gas diffusion layer in high temperature PEMFC with the focuses on thickness and porosity.” Appl. Energy 300 (Oct): 117357. https://doi.org/10.1016/j.apenergy.2021.117357.
Yang, P., Y. Wang, Y. Yang, L. Yuan, and Z. Jin. 2021. “Effects of gas diffusion layer porosity distribution on proton exchange membrane fuel cell.” Energy Technol. 9 (7): 2001012. https://doi.org/10.1002/ente.202001012.
Zhou, H. R., B. Chen, K. Meng, M. J. Luo, P. Li, and Z. K. Tu. 2022. “Combination effect of flow channel configuration and anode GDL porosity on mass transfer and performance of PEM water electrolyzers.” Sustainable Energy Fuels 6 (17): 3944–3960. https://doi.org/10.1039/d2se00974a.
Zhou, K., T. Y. Li, Y. F. Han, J. H. Wang, J. Chen, and K. J. Wang. 2021. “Optimizing the hydrophobicity of GDL to improve the fuel cell performance.” RSC Adv. 11 (4): 2010–2019. https://doi.org/10.1039/d0ra09658j.
Zhou, Y., and J. Wang. 2016. “Effect of assembly force on gas diffusion layer for proton exchange membrane fuel cell.” [In Chinese.] J. Syst. Simul. 28 (4): 991–996.
Zhu, R. J., Z. G. Zhan, H. Zhang, Q. Du, X. S. Chen, X. Xiang, X. F. Wen, and M. Pan. 2023. “Effects of cathode GDL gradient porosity distribution along the flow channel direction on gas-liquid transport and performance of PEMFC.” Polymers 15 (7): 1629. https://doi.org/10.3390/polym15071629.
Information & Authors
Information
Published In
Journal of Energy Engineering
Volume 151 • Issue 1 • February 2025
Copyright
© 2024 American Society of Civil Engineers.
History
Received: Feb 26, 2024
Accepted: Jul 15, 2024
Published online: Oct 18, 2024
Published in print: Feb 1, 2025
Discussion open until: Mar 18, 2025
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.