Thermal Study of Clay Bricks Reinforced by Dry-Grass Fibers
Publication: Journal of Energy Engineering
Volume 149, Issue 1
Abstract
This paper assesses the dynamic thermal inertia performance of unfired clay bricks with dry-grass fiber additives. The used raw material was retrieved from Ifrane in Morocco. The used clay was illite with a 59.60% silicon proportion. Multiple percentages (0%, 1%, 7%, and 15%) were analyzed in this study. The dynamic thermal inertia simulation was carried out in TRNSYS software to investigate the specimens’ time lag, decrement factor, and heating and cooling loads. For this purpose, a reference house with three different wall thicknesses (0.20, 0.25, and 0.30 m) was evaluated. Collected findings reflected great time lag improvements. With the incorporation of 15% additive, 13.11 h was recorded. This reflected a thermal gain of 49.12% with the use of 0.30-m-thick walls. Decrement factor analysis also recorded interesting improvements. Thermal cooling and heating loads also recorded prominent energy savings of 95% and 60%, respectively. Finally, adopting thicker building walls recorded great thermal gains in the range of 60%.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
This research has been conducted under the framework of the Project ABC 21 (Africa-Europe BioClimatic buildings for XXI century), funded by the European Union’s Horizon 2020 Research and Innovation Program, Grant Agreement No. 894712.
References
Ahmad, S., Y. Iqbal, and R. Muhammad. 2017. “Effects of coal and wheat husk additives on the physical, thermal and mechanical properties of clay bricks.” Bol. Soc. Esp. Cerám. Vidrio 56 (3): 131–138. https://doi.org/10.1016/j.bsecv.2017.02.001.
Ahmed, S., and I. Arocho. 2022. “Choosing by advantages (CBA) method to determine feasibility of mass timber building material in the US construction market.” In Proc., Construction Research Congress 2022. Reston, VA: ASCE.
AlShuhail, K., A. Aldawoud, J. Syarif, and I. A. Abdoun. 2021. “Enhancing the performance of compressed soil bricks with natural additives: Wood chips and date palm fibers.” Constr. Build. Mater. 295 (Aug): 123611. https://doi.org/10.1016/j.conbuildmat.2021.123611.
Asan, H. 2006. “Numerical computation of time lags and decrement factors for different building materials.” Build. Environ. 41 (5): 615–620. https://doi.org/10.1016/j.buildenv.2005.02.020.
Asan, H., and Y. S. Sancaktar. 1998. “Effects of wall’s thermophysical properties on time lag and decrement factor.” Energy Build. 28 (2): 159–166. https://doi.org/10.1016/S0378-7788(98)00007-3.
Bisht, V., L. Chaurasia, L. P. Singh, and S. Gupta. 2020. “Bacterially stabilized desert-sand bricks: Sustainable building material.” J. Mater. Civ. Eng. 32 (6): 04020131. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003101.
Bouvenot, J.-B., V. Jimenez, and L. Desport. 2021. “Dynamic thermal behaviour characterization of integrated insulation clay hollow blocks for buildings energy simulations applications.” J. Build. Perform. Simul. 14 (5): 515–535. https://doi.org/10.1080/19401493.2021.1975824.
Brigham, C. 2018. “Biodegradable alternatives to traditional plastics.” Chap. 3.22 in Biopolymers, edited by B. Török and T. B. T.-G. C. Dransfield, 753–770. Amsterdam, Netherlands: Elsevier.
Cao, X., X. Dai, and J. Liu. 2016. “Building energy-consumption status worldwide and the state-of-the-art technologies for zero-energy buildings during the past decade.” Energy Build. 128 (Sep): 198–213. https://doi.org/10.1016/j.enbuild.2016.06.089.
Chihab, Y., R. Bouferra, M. Garoum, M. Essaleh, and N. Laaroussi. 2022. “Thermal inertia and energy efficiency enhancements of hollow clay bricks integrated with phase change materials.” J. Build. Eng. 53 (Aug): 104569. https://doi.org/10.1016/j.jobe.2022.104569.
Diatta, M., S. Gaye, A. Thiam, and D. Azilinon. 2018. “Determination of the thermophysical and mechanical properties of typha Australis.” [In French.] In Proc., Conf. French Thermal Congress 2011. Morangis, France: Congrès Français de Thermique.
Dieye, Y., V. Sambou, M. Faye, A. Thiam, M. Adj, and D. Azilinon. 2017. “Thermo-mechanical characterization of a building material based on typha Australis.” J. Build. Eng. 9 (Jan): 142–146. https://doi.org/10.1016/j.jobe.2016.12.007.
Dlimi, M., O. Iken, R. Agounoun, A. Zoubir, and K. Sbai. 2018. “Experimental and numerical investigations on the thermal performance of hemp such a bio-sourced insulation material: Application to a Moroccan Mediterranean climate.” Int. J. Eng. Technol. 7 (1.8): 157. https://doi.org/10.14419/ijet.v7i1.9090.
IMANOR. 2006a. NM 00.6.125-2006. Rabat, Morocco: Institut Marocain de Normalisation.
IMANOR. 2006b. NM 01.1.333-2006. Rabat, Morocco: Institut Marocain de Normalisation.
Jexembayeva, A., T. Salem, P. Jiao, B. Hou, and R. Niyazbekova. 2020. “Blended cement mixed with basic oxygen steelmaking slag (BOF) as an alternative green building material.” Materials (Basel) 13 (14): 3062. https://doi.org/10.3390/ma13143062.
Kazmi, S. M. S., M. J. Munir, I. Patnaikuni, Y.-F. Wu, and U. Fawad. 2018. “Thermal performance enhancement of eco-friendly bricks incorporating agro-wastes.” Energy Build. 158 (Jan): 1117–1129. https://doi.org/10.1016/j.enbuild.2017.10.056.
Konkanov, M., T. Salem, P. Jiao, R. Niyazbekova, and N. Lajnef. 2020. “Environment-friendly, self-sensing concrete blended with byproduct wastes.” Sensors 20 (7): 1925. https://doi.org/10.3390/s20071925.
Lamrani, M., M. Mansour, N. Laaroussi, and M. Khalfaoui. 2019. “Thermal study of clay bricks reinforced by three ecological materials in south of Morocco.” Energy Procedia 156 (Jan): 273–277. https://doi.org/10.1016/j.egypro.2018.11.141.
Lertwattanaruk, P., and J. Choksiriwanna. 2011. “The physical and thermal properties of adobe brick containing bagasse for earth construction.” Int. J. Build. Urban Inter. Landscape Technol. 1: 53–62. https://doi.org/10.14456/built.2011.5.
Limami, H., I. Manssouri, K. Cherkaoui, L. Amazian, A. El Baraka, and A. Khaldoun. 2019. Unfired clay bricks with additives and mechanical simulation of perforated bricks. New York: IEEE.
Limami, H., I. Manssouri, K. Cherkaoui, and A. Khaldoun. 2020a. “Physicochemical, mechanical and thermal performance of lightweight bricks with recycled date pits waste additives.” J. Build. Eng. 34 (Feb): 101867. https://doi.org/https://doi.org/10.1016/j.jobe.2020.101867.
Limami, H., I. Manssouri, K. Cherkaoui, and A. Khaldoun. 2020b. “Study of the suitability of unfired clay bricks with polymeric HDPE & PET wastes additives as a construction material.” J. Build. Eng. 27 (Jan): 100956. https://doi.org/10.1016/j.jobe.2019.100956.
Limami, H., I. Manssouri, K. Cherkaoui, and A. Khaldoun. 2021a. “Mechanical and physicochemical performances of reinforced unfired clay bricks with recycled typha-fibers waste as a construction material additive.” Cleaner Eng. Technol. 2 (Jun): 100037. https://doi.org/10.1016/j.clet.2020.100037.
Limami, H., I. Manssouri, K. Cherkaoui, and A. Khaldoun. 2021b. “Recycled wastewater treatment plant sludge as a construction material additive to ecological lightweight earth bricks.” Cleaner Eng. Technol. 2 (Jun): 100050. https://doi.org/10.1016/j.clet.2021.100050.
Limami, H., I. Manssouri, K. Cherkaoui, and A. Khaldoun. 2021c. “Thermal analysis of lightweight clay bricks with typha-fiber additives.” J. Energy Eng. 147 (4): 04021020. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000762.
Limami, H., I. Manssouri, K. Cherkaoui, M. Saadaoui, and A. Khaldoun. 2020c. “Thermal performance of unfired lightweight clay bricks with HDPE & PET waste plastics additives.” J. Build. Eng. 30 (Jul): 101251. https://doi.org/10.1016/j.jobe.2020.101251.
Limami, H., I. Manssouri, O. Noureddine, Y. Lehleh, K. Cherkaoui, S. Erba, H. Sahbi, and A. Khaldoun. 2022. “Thermophysical and mechanical assessment of unfired clay bricks with dry grass fibrous filler.” Int. J. Thermophys. 43 (8): 114. https://doi.org/10.1007/s10765-022-03043-8.
Noureddine, O., I. Manssouri, K. Cherkaoui, H. Sahbi, H. Limami, S. Erba, and A. Khaldoun. 2022. “Viscoelastic measurements of clay suspensions and their relationship to strength of unfired clay bricks with almond husk additive.” Int. J. Eng. Res. Afr. 61 (Jul): 231–244. https://doi.org/10.4028/p-1p1oy2.
Ozturk, S., M. Sutcu, E. Erdogmus, and O. Gencel. 2019. “Influence of tea waste concentration in the physical, mechanical and thermal properties of brick clay mixtures.” Constr. Build. Mater. 217 (Aug): 592–599. https://doi.org/10.1016/j.conbuildmat.2019.05.114.
Saidi, E. M., A. El Baraka, H. Limami, and A. Khaldoun. 2019. Design of an efficient insulation system for a house in Zaouiat Sidi Abdeslam. New York: IEEE.
Sali, S., H. R. Mackey, and A. A. Abdala. 2019. “Effect of graphene oxide synthesis method on properties and performance of polysulfone-graphene oxide mixed matrix membranes.” Nanomaterials 9 (5): 769. https://doi.org/10.3390/nano9050769.
Scartezzini, J.-L., M. Cianfrini, M. Corcione, R. De Lieto Vollaro, E. Habib, and A. Quintino. 2015. Thermal inertia of hollow wall blocks: Actual behavior and myths. Lausanne, Switzerland: École Polytechnique Fédérale de Lausanne.
Suito, E., and A. Masafumi. 1964. “Mechanism of reinforcement of rubber with hard clay: Infrared studies of rubber-fillers systems.” Bull. Inst. Chem. Res. Kyoto Univ. 42 (2–3): 105–114.
Tommalieh, M. J., A. M. Zihlif, and G. Ragosta. 2011. “Electrical and thermal properties of polyimide/silica nanocomposite.” J. Exp. Nanosci. 6 (6): 652–664. https://doi.org/10.1080/17458080.2010.547950.
van Olphen, H. 1964. Clay colloid chemistry. New York: Elsevier.
World Bank Group. 2018. Governing towards efficiency, equity, education and endurance. Washington, DC: World Bank.
Yadav, R., M. Naebe, X. Wang, and B. Kandasubramanian. 2017. “Structural and thermal stability of polycarbonate decorated fumed silica nanocomposite via thermomechanical analysis and in-situ temperature assisted SAXS.” Sci. Rep. 7 (1): 7706. https://doi.org/10.1038/s41598-017-08122-7.
Zheng, D., L. Yu, and L. Wang. 2019. “Research on large-scale building energy efficiency retrofit based on energy consumption investigation and energy-saving potential analysis.” J. Energy Eng. 145 (6): 04019024. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000618.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: May 18, 2022
Accepted: Sep 7, 2022
Published online: Nov 8, 2022
Published in print: Feb 1, 2023
Discussion open until: Apr 8, 2023
ASCE Technical Topics:
- Bricks
- Building materials
- Chemical additives
- Chemicals
- Chemistry
- Clays
- Continuum mechanics
- Design (by type)
- Dynamic loads
- Dynamics (solid mechanics)
- Engineering fundamentals
- Engineering materials (by type)
- Engineering mechanics
- Environmental engineering
- Geomechanics
- Geotechnical engineering
- Inertia
- Load factors
- Materials engineering
- Soil dynamics
- Soil mechanics
- Soil stabilization
- Soils (by type)
- Solid mechanics
- Statics (mechanics)
- Structural design
- Structural dynamics
- Thermal effects
- Thermodynamics
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Ling Cheng, Sirui Zhang, Zhaoying Wang, Bin Li, Huan Zhang, Wandong Zheng, Study of the Performance of a Photovoltaic and Heat Pump Coupling System in a Low-Carbon Community, Journal of Energy Engineering, 10.1061/JLEED9.EYENG-5236, 150, 3, (2024).