Abstract
Various grate inlets are commonly used for different purposes. Since the grate inlets’ water-catching capacity depends on many factors, defining the best option is crucial for a sustainable drainage system. In this study, four cases with the same length, width, and void area but different geometries have been numerically studied to establish to which extent the design difference in the grate inlet affects the water-catching capacity. It has been determined how much of the approaching flow is caught by the grate inlets placed on the road with constant transverse and longitudinal slopes. The most efficient case is examined in more detail to determine the effect of the void area location on the water-catching capacity. The numerical results are discussed by comparing them with the analytical results. It has been confirmed that the location and shape of the void areas have an essential effect on the efficiency of grate inlets. Even though the void area is equal, it is concluded that the continuous void areas are more effective than the discontinuous areas. According to the results, choosing the most suitable grate among the alternative inlet designs is possible, or developing a more effective new design using numerical results provides the opportunity to compare the designs.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
The authors would like to acknowledge the Kocaeli Water and Sewerage Administration for providing all information about Case 1 needed to produce this paper.
References
Aranda, J. Á., C. Beneyto, M. Sánchez-Juny, and E. Bladé. 2021. “Efficient design of road drainage systems.” Water 13 (12): 1661. https://doi.org/10.3390/w13121661.
Begum, S., M. G. Rasul, R. J. Brown, N. Subaschandar, and P. Thomas. 2011. “An experimental and computational investigation of performance of the Green Gully for reusing stormwater.” J. Water Reuse Desalin. 1 (2): 99–112. https://doi.org/10.2166/wrd.2011.010.
Brackbill, J. U., D. B. Kothe, and C. Zemach. 1992. “A continuum method for modeling surface tension.” J. Comput. Phys. 100 (2): 335–354. https://doi.org/10.1016/0021-9991(92)90240-Y.
Cárdenas-Quintero, M., and F. Carvajal-Serna. 2021. “Review of the hydraulic capacity of urban grate inlet: A global and Latin American perspective.” Water Sci. Technol. 83 (11): 2575–2596. https://doi.org/10.2166/wst.2021.151.
Davis, A. C., R. P. Jacob, and B. G. S. Ellett. 1998. “Factors ınfluencıng the effıcıency of road draınage gratıngs.” Proc. Inst. Civ. Eng. Munic. Eng. 127 (2): 63–72. https://doi.org/10.1680/imuen.1998.30443.
Despotovic, J., J. Plavsic, N. Stefanovic, and D. Pavlovic. 2005. “Inefficiency of storm water inlets as a source of urban floods.” Water Sci. Technol. 51 (2): 139–145. https://doi.org/10.2166/wst.2005.0041.
Fang, X., S. Jiang, and S. R. Alam. 2010. “Numerical simulations of efficiency of curb-opening inlets.” J. Hydraul. Eng. 136 (1): 62–66. https://doi.org/10.1061/(ASCE)HY.1943-7900.0000131.
Fathy, I., G. M. Abdel-Aal, M. R. Fahmy, A. Fathy, M. Zeleňáková, H. F. Abd-Elhamid, and M. A. Nassar. 2022. “Effect of changing the shape and size of inlet area of grates on the hydraulic efficiency of urban rainstorm drainage systems.” Water 14 (16): 2541. https://doi.org/10.3390/w14162541.
Galambos, I. 2012. “Improved understanding of performance of local controls linking the above and below ground components of urban flood flows.” Ph.D. thesis, Dept. of Philosophy in Engineering, Univ. of Exeter.
Gómez, M., J. Recasens, B. Russo, and E. Martínez-Gomariz. 2016. “Assessment of inlet efficiency through a 3D simulation: Numerical and experimental comparison.” Water Sci. Technol. 74 (8): 1926–1935. https://doi.org/10.2166/wst.2016.326.
Gómez, M., and B. Russo. 2011. “Methodology to estimate hydraulic efficiency of drain inlets.” Water Manage. 164 (2): 81–90. https://doi.org/10.1680/wama.900070.
Guo, J. C., and K. MacKenzie. 2012. Hydraulic efficiency of grate and curb-opening inlets under clogging effect. Branch, CO: DTD Applied Research and Innovation Branch.
Guo, S., L. Chen, G. F. Chen, W. Zhang, and Y. Ma. 2021. “Experimental study of the hydraulic performance of continuous transverse grates.” J. Irrig. Drain. Eng. 147 (9): 06021007. https://doi.org/10.1061/(ASCE)IR.1943-4774.0001590.
Hromadka, T. V., II, P. Rao, and M. Battoei. 2020. “CFD analysis of flow in a grated inlet.” Open J. Civ. Eng. 10 (1): 32–42. https://doi.org/10.4236/ojce.2020.101004.
Izzard, C. F., and W. I. Hicks. 1946. “Hydraulics of runoff from developed surfaces.” In Proc., Highway Research Board 26, 129–150. Washington, DC: Transportation Research Board.
Kemper, S., and A. Schlenkhoff. 2016. “Capacity of street inlets with partially severed grate openings.” In Proc., 6th Int. Junior Researcher and Engineer Workshop on Hydraulic Structures. Salt Lake City, UT: Utah State Univ. https://doi.org/10.15142/T3W01S.
Kemper, S., and A. Schlenkhoff. 2019. “Experimental study on the hydraulic capacity of grate inlets with supercritical surface flow conditions.” Water Sci. Technol. 79 (9): 1717–1726. https://doi.org/10.2166/wst.2019.171.
Kibar, A. 2018. “Experimental and numerical investigation on a liquid jet impinging on a vertical superhydrophobic surface: Spreading and reflection.” Prog. Comput. Fluid Dyn. 18 (3): 150–163. https://doi.org/10.1504/PCFD.2018.091708.
Lopes, P., J. Leandro, R. F. Carvalho, B. Russo, and M. Gómez Valentín. 2016. “Assessment of the ability of a volume of fluid model to reproduce the efficiency of a continuous transverse gully with grate.” J. Irrig. Drain. Eng. 142 (10): 04016039. https://doi.org/10.1061/(ASCE)IR.1943-4774.0001058.
Sezenöz, B. 2014. “Numerical modelling of continuous transverse grates for hydraulic efficiency.” Master’s thesis, Dept. of Civil Engineering, Middle East Technical Univ.
Spaliviero, F., R. May, and M. Escarameia. 2000. Spacing of road gullies hydraulic performance of BS EN 124 gully gratings and kerb inlets. Wallingford, OX: HR Wallingford.
Tu, J., G. H. Yeoh, and C. Liu. 2013. Computational fluid dynamics: A practical approach. Oxford, UK: Butterworth-Heinemann. https://doi.org/10.1016/C2010-0-67980-6.
Veerappan, R., and J. Le. 2016. “Hydraulic efficiency of road drainage inlets for storm drainage system under clogging effect.” In Proc., 5th Int. Conf. on Flood Risk Management and Response, 271–281. Ashurst, Southampton, UK: WIT Press.
Wu, C. P., J. T. Yu, A. S. Wong, and C. W. Li. 2015. “Hydraulic interception efficiency of gully gratings on steep roads.” HKIE Trans. 22 (3): 192–198. https://doi.org/10.1080/1023697X.2015.1061704.
Yan, X., C. D. Rennie, and A. Mohammadian. 2020. “A three-dimensional numerical study of flow characteristics in strongly curved channel bends with different side slopes.” Environ. Fluid Mech. 20 (6): 1491–1510. https://doi.org/10.1007/s10652-020-09751-9.
Ye, F., and X. Gao. 2011. “Numerical simulations of the hydraulic characteristics of side inlet/outlets.” J. Hydrodyn. 23 (1): 48–54. https://doi.org/10.1016/S1001-6058(10)60087-X.
Information & Authors
Information
Published In
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Jul 13, 2022
Accepted: Mar 21, 2023
Published online: May 17, 2023
Published in print: Aug 1, 2023
Discussion open until: Oct 17, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.