Elastic–Plastic Dynamic Damage Constitutive Model of Cement-Stabilized Steel Slag
Publication: Journal of Engineering Mechanics
Volume 149, Issue 11
Abstract
On the basis of elastic–plastic theory and generalized Hooke’s law, and with the rate effect and random damage characteristics of cement-stabilized steel slag taken into consideration, an elastic–plastic dynamic damage constitutive model of cement-stabilized steel slag under a complex stress state was established in this paper. In the aspect of damage deterioration, the damage evolution equation of cement-stabilized steel slag was established by using statistical theory and introducing the concepts of damage threshold and equivalent plastic strain. With the influence of pore water pressure on materials taken into consideration, Terzaghi’s effective stress principle was introduced and the effective stress expression was modified based on the characteristics of cement-stabilized steel slag. With the existence of the ultimate dynamic strength of brittle materials, the -type dynamic strength criterion of cement-stabilized steel slag was established based on this property. The explicit integral stress return algorithm of the elastic–plastic dynamic damage constitutive model of cement-stabilized steel slag was derived through elastic–plastic theory, and the solving program of the elastic–plastic dynamic damage constitutive model of cement-stabilized steel slag was developed by using the subroutine interface vectorized user defined material (VUMAT) provided by ABAQUS.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
The authors gratefully acknowledge financial support provided by the Xinjiang Huli Jiayuan Environmental Protection Technology Co., Ltd. Project (Grant No. HLJY2020KY0402B).
References
Al-Salloum, Y., T. Almusallam, S. M. Ibrahim, H. Abbas, and S. Alsayed. 2015. “Rate dependent behavior and modeling of concrete based on SHPB experiments.” Cem. Concr. Compos. 55 (Jan): 34–44. https://doi.org/10.1016/j.cemconcomp.2014.07.011.
Biot, M. A. 1941. “General theory of three-dimensional consolidation.” J. Appl. Phys. 12 (2): 155–164. https://doi.org/10.1063/1.1712886.
CAD/CAM/CAE (Computer Aided Design/Computer Aided Manufacturing/Computer Aided Engineering) Technology Alliance. 2017. ABAQUS 2016 finite element analysis from beginner to mastery. Beijing: Tsinghua University Press.
Cai, X. H., Y. B. Cai, and Y. P. Cai. 2020. “Stress invariant expression and shear angle parameter of Moor-Coulomb yield criterion study on the mattability of expression and stress symbol convention.” Jiangxi Hydraul. Sci. Technol. 46 (2): 95–99.
Cao, W. G., Z. L. Fang, and X. J. Tang. 1998. “A study of statistical constitutive model for soft and damage rocks.” Chin. J. Rock Mech. Eng. 17 (6): 628–633. https://doi.org/CNKI:SUN:YSLX.0.1998-06-003.
Cao, W. G., and S. Zhang. 2005. “Study on the statistical analysis of rock damage based on mohr-coulomb criterion.” J. Hunan Univ. 32 (1): 43–47. https://doi.org/10.1080/02726340590910084.
Cao, W. G., H. Zhao, X. Li, and Y. J. Zhang. 2010. “Statistical damage model with strain softening and hardening for rocks under the influence of voids and volume changes.” Can. Geotech. J. 47 (8): 857–871. https://doi.org/10.1139/T09-148.
China Association of Metal Scrap Utilization. 2021. “‘14th Five-Year Plan’ Development Plan for Scrap Iron and Steel Industry.” Resour. Recycl. 2021 (8): 16–21. https://doi.org/10.3969/j.issn.1673-7776.2021.08.006.
Chi, Y., L. H. Xu, and H. Yu. 2014. “Constitutive modeling of steel-polypropylene hybrid fiber reinforced concrete using a non-associated plasticity and its numerical implementation.” Compos. Struct. 111 (May): 497–509. https://doi.org/10.1016/j.compstruct.2014.01.025.
Dou, L. M., and X. Q. He. 2001. “Coal and rock mechanic features influencing the stress distribution.” J. Liaoning Tech. Univ. (Nat. Sci. Ed.) 20 (4): 484–486. https://doi.org/10.3969/j.issn.1008-0562.2001.04.036.
Duan, K. L., Y. S. Zhao, W. Zhang, and Y. Q. Hu. 1991. “Study on effective stress law of coal under pore water pressure.” In Proc., North China Academic Conf. on Rock Mechanics and Engineering Applications, 148–161. Beijing: CNKI.
Etse, G., and K. Willam. 1994. “Fracture energy formulation for inelastic behavior of plain concrete.” J. Eng. Mech. 120 (9): 1983–2011. https://doi.org/10.1061/(ASCE)0733-9399(1994)120:9(1983).
Fan, F. L., X. H. Ye, J. Y. Xu, W. M. Li, and Y. Chen. 2010. “Dynamic constitutive relation of basalt fiber reinforced concrete under impact loading.” J. Vib. Shock 29 (11): 110–114. https://doi.org/10.3969/j.issn.1000-3835.2010.11.024.
Fei, K., and J. Peng. 2017. Detailed explanation of ABAQUS geotechnical engineering examples. Beijing: Posts & Telecom Press.
Fei, K., and J. W. Zhang. 2013. Application of ABAQUS in geotechnical engineering. Beijing: China Water Power Press.
Feng, P., F. Dai, Y. Liu, N. W. Xu, and P. X. Fan. 2018. “Effects of coupled static and dynamic strain rates on mechanical behaviors of rock-like specimens containing pre-existing fissures under uniaxial compression.” Can. Geotech. J. 55 (5): 640–652. https://doi.org/10.1139/cgj-2017-0286.
Feng, Z. C., H. Wu, and Y. S. Zhao. 2003. “The numerical study of effective stresses law of rock mass.” J. Taiyuan Univ. Technol. 34 (6): 713–715. https://doi.org/110.16355/j.cnki.issn1007-9432tyut.2003.06.023.
Gary, G., and P. Bailly. 1998. “Behaviour of quasi-brittle material at high strain rate. Experiment and modelling.” Eur. J. Mech. A. Solids 17 (3): 403–420. https://doi.org/10.1016/S0997-7538(98)80052-1.
Grassl, P. 2004. “Modelling of dilation of concrete and its effect in triaxial compression.” Finite Elem. Anal. Des. 40 (9–10): 1021–1033. https://doi.org/10.1016/j.finel.2003.04.002.
Imran, I., and S. J. Pantazopoulou. 1996. “Experimental study of plain concrete under triaxial stress.” ACI Mater. J.-Am. Concr. Inst. 93 (6): 589–601. https://doi.org/10.14359/9865.
Kong, L., and I. F. Collins. 2008. “Thermomechanical approach to modeling constitutive behaviors of geomaterials.” Rock Soil Mech. 29 (7): 1732–1740. https://doi.org/10.3901/JME.2008.10.294.
Kong, W. X., Y. Q. Wo, and B. D. Dong. 2009. “Determination of dilatancy angle for geomaterials under non-associated flow rule.” Rock Soil Mech. 30 (11): 3278–3282. https://doi.org/10.3969/j.issn.1000-7598.2009.11.010.
Kotsovos, M. D., and J. B. Newman. 1978. “Generalized stress-strain relations for concrete.” J. Eng. Mech. Div. 104 (4): 845–856. https://doi.org/10.1061/JMCEA3.0002384.
Li, G. X. 2008. “Some experiences on the discussion of soil Mechanics textbooks (2)–positive and negative signs in soil mechanics.” Geotech. Eng. World 11 (11): 21–22. https://doi.org/10.3969/j.issn.1674-7801.2008.11.006.
Li, J., and X. D. Ren. 2010. “A review on the constitutive model for static and dynamic damage of concrete.” Adv. Mech. 40 (3): 284–298. https://doi.org/10.6052/1000-0992-2010-3-J2008-043.
Li, P. D., and Y. F. Wu. 2015. “Stress-strain model of FRP confined concrete under cyclic loading.” Compos. Struct. 134: 60–71. https://doi.org/10.1016/j.compstruct.2015.08.056.
Liu, X. J., and Y. Zhang. 2013. “Study on performance of cement-stabilized steel slag.” J. Inner Mongolia Petrochem. Ind. 39 (1): 43–44. https://doi.org/10.3969/j.issn.1006-7981.2013.01.018.
Liu, X. L., Z. Liu, X. B. Li, F. Q. Gong, and K. Du. 2020. “Experimental study on the effect of strain rate on rock acoustic emission characteristics.” Int. J. Rock Mech. Min. Sci. 133 (Sep): 104420. https://doi.org/10.1016/j.ijrmms.2020.104420.
Lu, D. C., X. L. Du, G. S. Wang, A. N. Zhou, and A. K. Li. 2016. “A three-dimensional elastoplastic constitutive model for concrete.” Comput. Struct. 163 (Jan): 41–55. https://doi.org/10.1016/j.compstruc.2015.10.003.
Lu, D. C., X. L. Du, J. R. Yan, and A. K. Li. 2014. “A three-dimensional elastoplastic constitutive model for concrete.” Sci. Sin. Technol. 44 (8): 847–860. https://doi.org/10.1360/092013-1159.
Lu, D. C., G. S. Wang, X. L. Du, and Y. Wang. 2017. “A nonlinear dynamic uniaxial strength criterion that considers the ultimate dynamic strength of concrete.” Int. J. Impact Eng. 103 (May): 124–137. https://doi.org/10.1016/j.ijimpeng.2017.01.011.
Lu, D. C., X. Zhou, X. L. Du, and G. S. Wang. 2019. “A 3D fractional elastoplastic constitutive model for concrete material.” Int. J. Solids Struct. 165 (Jun): 160–175. https://doi.org/10.1016/j.ijsolstr.2019.02.004.
Qu, S. N., and Y. Q. Yin. 1981. “Drucker’s and ilyushin’s postulate of plasticity.” Chin. J. Theor. Appl. Mech. 17 (5): 465–473. https://doi.org/10.6052/0459-1879-1981-5-1981-061.
Ren, Y. S., D. Liang, X. W. Gou, Z. Chen, and W. D. Mu. 2020. “Study on volumetric expansion properties of cement stabilized base layer produced with steel slag.” World Build. Mater. 41 (2): 12–14. https://doi.org/10.3963/j.issn.1674-6066.2020.02.004.
Sargin, M. 1971. Stress-strain relationship for concrete and the analysis of structural concrete sections. Waterloo, ON, Canada: Univ. of Waterloo.
Scherer, R., S. L. Kalla, Y. Tang, and J. F. Huang. 2011. “The Grünwald–Letnikov method for fractional differential equations.” Comput. Math. Appl. 62 (3): 902–917. https://doi.org/10.1016/j.camwa.2011.03.054.
Sfer, D., I. Carol, R. Gettu, and G. Etse. 2002. “Study of the behavior of concrete under triaxial compression.” J. Eng. Mech. 128 (2): 156–163. https://doi.org/10.1061/(ASCE)0733-9399(2002)128:2(156).
Song, Y. P., and H. Liu. 2012. “Rate-dependent endochronic damage constitutive model for concrete.” Chin. J. Comput. Mech. 29 (4): 589–593. https://doi.org/10.7511/dllgxb201501007.
Sumelka, W. 2014. “Fractional viscoplasticity.” Mech. Res. Commun. 56 (Mar): 31–36. https://doi.org/10.1016/j.mechrescom.2013.11.005.
Sun, Y. F., Y. F. Gao, and W. Ju. 2018. “Fractional plasticity and its application in constitutive model for sands.” Chin. J. Geotech. Eng. 40 (8): 1535–1541. https://doi.org/10.11779/CJGE201808021.
Tang, C. A. 1993. Catastrophe in the process of rock fracture. Beijing: Coal Industry Press.
Terzaghi, K. T. 1943. Theoretical soil mechanics. New York: Wiley.
Wang, G. S., D. C. Lu, X. L. Du, X. Zhou, and S. T. Cao. 2018. “A true 3D frictional hardening elastoplastic constitutive model of concrete based on a unified hardening/softening function.” J. Mech. Phys. Solids 119 (Oct): 250–273. https://doi.org/10.1016/j.jmps.2018.06.019.
Wang, J. L., Y. R. Zheng, Y. Y. Chen, and K. Y. Li. 2003. “Discussion on upper-bound method of limit analysis for geotechenical material.” Rock Soil Mech. 24 (4): 538–544.
Wang, J. X., and A. N. Jiang. 2015. “An elastoplastic damage constitutive model of rock and its application to tunnel engineering.” Rock Soil Mech. 36 (4): 1147–1158. https://doi.org/10.16285/j.rsm.2015.04.032.
Wang, S. Y., G. X. Chen, and L. K. Zhang. 2022. “Parameter inversion and microscopic damage research on discrete element model of cement-stabilized steel slag based on 3D scanning technology.” J. Hazard. Mater. 424 (Feb): 127402. https://doi.org/10.1016/j.jhazmat.2021.127402.
Xu, D. J., and N. G. Geng. 1985. “The variation law of rock strength with increase of intermediate principal stress.” Acta Mech. Solida Sin. 6 (1): 72–80. https://doi.org/10.13374/j.issn2095-9389.2016.02.020.
Yu, M. H. 1998. Double shear theory and its application. Beijing: Science press.
Yu, M. H., S. Y. Yang, S. C. Fan, and D. Q. Feng. 1997. “Twin shear unified elasto-plastic constitutive model and its applications.” Chin. J. Geotech. Eng. 19 (6): 2–10. https://doi.org/CNKI:SUN:YTGC.0.1997-06-001.
Zhang, J., J. Li, and J. W. Ju. 2016. “3D elastoplastic damage model for concrete based on novel decomposition of stress.” Int. J. Solids Struct. 94–95 (Sep): 125–137. https://doi.org/10.1016/j.ijsolstr.2016.04.038.
Zhang, Y., Y. X. Li, and L. H. Jiang. 2014. “Strain rate-dependent elastoplastic damage model for concrete.” J. Build. Mater. 17 (3): 396–400. https://doi.org/10.3969/j.issn.1007-9629.2014.03.005.
Zhao, D. S., and Y. Q. Hu. 1995. “Experimental study of the law of effective stress by methane pressure.” Chin. J. Geotech. Eng. 17 (3): 26–31. https://doi.org/CNKI:SUN:YTGC.0.1995-03-003.
Zheng, Y. R., Z. J. Shen, and X. N. Gong. 2002. Principle of geotechnical plastic mechanics. Beijing: China Building Industry Press.
Zhou, B. B., R. L. Zhang, and Y. Lei. 2016. “Fractional order differential and integral of Riemann-Liouville and Cputo.” J. Tianjin Normal Univ. 36 (5): 20–22. https://doi.org/10.3969/j.issn.1671-1114.2016.05.006.
Zhuang, Z., X. C. You, J. H. Liao, S. Cen, X. P. Shen, and M. G. Liang. 2009. Finite element analysis and application based on ABAQUS. Beijing: Tsinghua University Press.
Information & Authors
Information
Published In
Journal of Engineering Mechanics
Volume 149 • Issue 11 • November 2023
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Jan 2, 2023
Accepted: Jun 22, 2023
Published online: Aug 24, 2023
Published in print: Nov 1, 2023
Discussion open until: Jan 24, 2024
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.