Effect of Graphene Embedment on Fiber–Matrix Interface and Tensile Properties of FRCM Composites
Publication: Journal of Composites for Construction
Volume 28, Issue 4
Abstract
This paper presents the results of an experimental study to investigate the effects of two types of graphene, dried (DG) and hydrated graphene (HG), when enhancing the interfacial and tensile mechanical properties of fabric-reinforced cementitious matrix (FRCM) composites. The inclusion of DG and HG could produce an improvement in the tensile strength of the FRCM composites by increasing the tensile strength of the mortar paste and the amount of fibers that participate in load bearing due to the increased penetration of mortar (cement hydrates) into the fiber bundle. The better dispersion of HG produces better results than DG. The maximum increases in the overall tensile strengths of the FRCM composites with DG and HG are 18% and 31%, respectively, with the majority of these improvements coming from the increase in the number of fibers that participate in load bearing. The microstructure images indicate increases of up to 20% and 44% in the mortar penetration thickness into the fiber bundles using DG and HG, respectively.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, or codes that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The authors acknowledge the financial support provided by the Engineering and Physical Sciences Research Council Fund (EP/T021748/1) for the completion of this research. In addition, acknowledgment should be given to material suppliers for their in-kind contribution to the research: the PC was supplied by Breedon UK, graphene was supplied by First Graphene (UK), and the carbon fabric mesh was provided by Ruregold (Italy).
References
Alan Strauss Rambo, D., C. Umbinger de Oliveira, R. Pícolo Salvador, R. Dias Toledo Filho, O. da Fonseca Martins Gomes, F. de Andrade Silva, and M. de Melo Vieira. 2021. “Sisal textile reinforced concrete: Improving tensile strength and bonding through peeling and nano-silica treatment.” Constr. Build. Mater. 301: 124300. https://doi.org/10.1016/j.conbuildmat.2021.124300.
Alexandre, V. J. F., W. P. Boshoff, and R. Combrinck. 2023. “Damage evaluation and mechanisms of textile reinforced concrete during telescopic failure.” Constr. Build. Mater. 403: 133055. https://doi.org/10.1016/j.conbuildmat.2023.133055.
Aljewifi, H., B. Fiorio, and J.-L. Gallias. 2010. “Characterization of the impregnation by a cementitious matrix of five glass multi-filament yarns.” Eur. J. Environ. Civ. Eng. 14 (5): 529–544. https://doi.org/10.1080/19648189.2010.9693245.
Artioli, G., L. Valentini, M. C. Dalconi, M. Parisatto, M. Voltolini, V. Russo, and G. Ferrari. 2014. “Imaging of nano-seeded nucleation in cement pastes by X-ray diffraction tomography.” Int. J. Mater. Res. 105 (7): 628–631. https://doi.org/10.3139/146.111049.
Ascione, L., G. de Felice, and S. De Santis. 2015. “A qualification method for externally bonded Fibre Reinforced Cementitious Matrix (FRCM) strengthening systems.” Composites, Part B 78: 497–506. https://doi.org/10.1016/j.compositesb.2015.03.079.
Babaeidarabad, S., G. Loreto, and A. Nanni. 2014. “Flexural strengthening of RC beams with an externally bonded fabric-reinforced cementitious matrix.” J. Compos. Constr. 18 (5): 04014009. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000473.
Banholzer, B. 2004. “Bond behaviour of a multi-filament yarn embedded in a cementitious matrix.” Ph.D. thesis, Faculty of Civil Engineering, Bibliothek der RWTH Aachen.
Baomin, W., and D. Shuang. 2019. “Effect and mechanism of graphene nanoplatelets on hydration reaction, mechanical properties and microstructure of cement composites.” Constr. Build. Mater. 228: 116720. https://doi.org/10.1016/j.conbuildmat.2019.116720.
Barhum, R., and V. Mechtcherine. 2012. “Effect of short, dispersed glass and carbon fibres on the behaviour of textile-reinforced concrete under tensile loading.” Eng. Fract. Mech. 92: 56–71. https://doi.org/10.1016/j.engfracmech.2012.06.001.
Boulekbache, B., M. Hamrat, M. Chemrouk, and S. Amziane. 2010. “Flowability of fibre-reinforced concrete and its effect on the mechanical properties of the material.” Constr. Build. Mater. 24 (9): 1664–1671. https://doi.org/10.1016/j.conbuildmat.2010.02.025.
Butler, M., S. Hempel, and V. Mechtcherine. 2011. “Modelling of ageing effects on crack-bridging behaviour of AR-glass multifilament yarns embedded in cement-based matrix.” Cem. Concr. Res. 41 (4): 403–411. https://doi.org/10.1016/j.cemconres.2011.01.007.
Calabrese, A. S., T. D'Antino, and P. Colombi. 2021. “Experimental and analytical investigation of PBO FRCM-concrete bond behavior using direct and indirect shear test set-ups.” Compos. Struct. 267: 113672. https://doi.org/10.1016/j.compstruct.2021.113672.
Calabrese, A. S., T. D'Antino, P. Colombi, and C. Poggi. 2020. “Study of the influence of interface normal stresses on the bond behavior of FRCM composites using direct shear and modified beam tests.” Constr. Build. Mater. 262: 120029. https://doi.org/10.1016/j.conbuildmat.2020.120029.
Carloni, C., T. D’Antino, L. H. Sneed, and C. Pellegrino. 2018. “Three-dimensional numerical modeling of single-lap direct shear tests of FRCM-concrete joints using a cohesive damaged contact approach.” J. Compos. Constr. 22 (1): 04017048. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000827.
Cohen, Z., and A. Peled. 2012. “Effect of nanofillers and production methods to control the interfacial characteristics of glass bundles in textile fabric cement-based composites.” Composites, Part A 43 (6): 962–972. https://doi.org/10.1016/j.compositesa.2012.01.022.
Contamine, R., A. Si Larbi, and P. Hamelin. 2011. “Contribution to direct tensile testing of textile reinforced concrete (TRC) composites.” Mater. Sci. Eng., A 528 (29): 8589–8598. https://doi.org/10.1016/j.msea.2011.08.009.
De Santis, S., H. A. Hadad, F. De Caso y Basalo, G. de Felice, and A. Nanni. 2018. “Acceptance criteria for tensile characterization of fabric-reinforced cementitious matrix systems for concrete and masonry repair.” J. Compos. Constr. 22 (6): 04018048. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000886.
Donnini, J., V. Corinaldesi, and A. Nanni. 2016. “Mechanical properties of FRCM using carbon fabrics with different coating treatments.” Composites, Part B 88: 220–228. https://doi.org/10.1016/j.compositesb.2015.11.012.
Donnini, J., F. De Caso y Basalo, V. Corinaldesi, G. Lancioni, and A. Nanni. 2017. “Fabric-reinforced cementitious matrix behavior at high-temperature: Experimental and numerical results.” Compos. Part B: Eng. 108: 108–121. https://doi.org/10.1016/j.compositesb.2016.10.004.
Du, H., H. J. Gao, and S. D. Pang. 2016. “Improvement in concrete resistance against water and chloride ingress by adding graphene nanoplatelet.” Cem. Concr. Res. 83: 114–123. https://doi.org/10.1016/j.cemconres.2016.02.005.
Dung, N. T., M. Su, M. Watson, and Y. Wang. 2023. “Effects of using aqueous graphene on behavior and mechanical performance of cement-based composites.” Constr. Build. Mater. 368: 130466. https://doi.org/10.1016/j.conbuildmat.2023.130466.
Dvorkin, D., A. Poursaee, A. Peled, and W. J. Weiss. 2013. “Influence of bundle coating on the tensile behavior, bonding, cracking and fluid transport of fabric cement-based composites.” Cem. Concr. Compos. 42: 9–19. https://doi.org/10.1016/j.cemconcomp.2013.05.005.
Ebead, U., K. C. Shrestha, M. S. Afzal, A. El Aefai, and A. Nanni. 2017. “Effectiveness of fabric-reinforced cementitious matrix in strengthening reinforced concrete beams.” J. Compos. Constr. 21 (2): 04016084. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000741.
Emdadi, A., I. Mehdipour, N. A. Libre, and M. Shekarchi. 2015. “Optimized workability and mechanical properties of FRCM by using fiber factor approach: Theoretical and experimental study.” Mater. Struct. 48 (4): 1149–1161. https://doi.org/10.1617/s11527-013-0221-3.
Focacci, F., T. D'Antino, and C. Carloni. 2020. “The role of the fiber–matrix interfacial properties on the tensile behavior of FRCM coupons.” Constr. Build. Mater. 265: 120263. https://doi.org/10.1016/j.conbuildmat.2020.120263.
Focacci, F., T. D’Antino, and C. Carloni. 2022. “Tensile testing of FRCM coupons for material characterization: Discussion of critical aspects.” J. Compos. Constr. 26 (4): 04022039. https://doi.org/10.1061/(ASCE)CC.1943-5614.0001223.
Fu, S.-Y., and B. Lauke. 1997. “The fibre pull-out energy of misaligned short fibre composites.” J. Mater. Sci. 32 (8): 1985–1993. https://doi.org/10.1023/A:1018593931951.
Guo, S., J. Ren, T. Yang, M. Z. Rahman, C. Shi, and D. Zhu. 2022. “Influences of surface treatment on the mechanical performances of carbon and basalt textiles-reinforced concretes under harsh environments.” Composites, Part B 246: 110195. https://doi.org/10.1016/j.compositesb.2022.110195.
Guo, W., J. Hu, Y. Ma, H. Huang, S. Yin, J. Wei, and Q. Yu. 2020. “The application of novel lightweight functional aggregates on the mitigation of acidification damage in the external anode mortar during cathodic protection for reinforced concrete.” Corros. Sci. 165: 108366. https://doi.org/10.1016/j.corsci.2019.108366.
Hartig, J., U. Häußler-Combe, and K. Schicktanz. 2008. “Influence of bond properties on the tensile behaviour of Textile Reinforced Concrete.” Cem. Concr. Compos. 30 (10): 898–906. https://doi.org/10.1016/j.cemconcomp.2008.08.004.
Ho, V. D., C.-T. Ng, C. J. Coghlan, A. Goodwin, C. Mc Guckin, T. Ozbakkaloglu, and D. Losic. 2020. “Electrochemically produced graphene with ultra large particles enhances mechanical properties of Portland cement mortar.” Constr. Build. Mater. 234: 117403. https://doi.org/10.1016/j.conbuildmat.2019.117403.
ICC (International Code Council). 2013. Acceptance criteria for masonry and concrete strengthening using fiber-reinforced cementitious matrix (FRCM) composite systems. AC434. ICC Evaluation Service. Washington, DC: ICC.
Jing, G., Z. Ye, X. Lu, and P. Hou. 2017. “Effect of graphene nanoplatelets on hydration behaviour of Portland cement by thermal analysis.” Adv. Cem. Res. 29 (2): 63–70. https://doi.org/10.1680/jadcr.16.00087.
Kamal, A., M. Kunieda, N. Ueda, and H. Nakamura. 2008. “Evaluation of crack opening performance of a repair material with strain hardening behavior.” Cem. Concr. Compos. 30 (10): 863–871. https://doi.org/10.1016/j.cemconcomp.2008.08.003.
Land, G., and D. Stephan. 2012. “Nanoparticles as accelerators for cement hydration.” In Proc., 3rd Int. Symp. on UHPC and Nanotechnology in Construction, 93–99. Kassel, Germany: Kassel University Press.
Laterlite. 2022. “Ruregold technical data sheet: C-Mesh 84/84.” Accessed July 16, 2023. https://ruregold.com/product/c-mesh-84-84/.
Li, V. C., Y. Wang, and S. Backer. 1990. “Effect of inclining angle, bundling and surface treatment on synthetic fibre pull-out from a cement matrix.” Composites 21 (2): 132–140. https://doi.org/10.1016/0010-4361(90)90005-H.
Lin, Y., and H. Du. 2020. “Graphene reinforced cement composites: A review.” Constr. Build. Mater. 265: 120312. https://doi.org/10.1016/j.conbuildmat.2020.120312.
Liu, S., P. Rawat, Z. Chen, S. Guo, C. Shi, and D. Zhu. 2020. “Pullout behaviors of single yarn and textile in cement matrix at elevated temperatures with varying loading speeds.” Composites, Part B 199: 108251. https://doi.org/10.1016/j.compositesb.2020.108251.
Liu, P., R. Feng, F. Wang, Y. Xu, and J.-H. Zhu. 2022. “Fatigue testing of corroded RC continuous beams strengthened with polarized C-FRCM plate under ICCP-SS dual-function retrofitting system.” Structures 43: 12–27. https://doi.org/10.1016/j.istruc.2022.06.035.
Mahmoudi, F., J. A. Abdalla, R. A. Hawileh, and Z. Zhang. 2022. “An overview of mechanical properties of engineered cementitious composite (ECC) with different percentages of GGBS.” Mater. Today:. Proc. 65: 2077–2080. https://doi.org/10.1016/j.matpr.2022.06.448.
Messori, M., A. Nobili, C. Signorini, and A. Sola. 2019. “Effect of high temperature exposure on epoxy-coated glass textile reinforced mortar (GTRM) composites.” Constr. Build. Mater. 212: 765–774. https://doi.org/10.1016/j.conbuildmat.2019.04.026.
Ozturk, M., and D. D. L. Chung. 2021. “Enhancing the electromagnetic interference shielding effectiveness of carbon-fiber reinforced cement paste by coating the carbon fiber with nickel.” J. Build. Eng. 41: 102757. https://doi.org/10.1016/j.jobe.2021.102757.
Peled, A., E. Zaguri, and G. Marom. 2008. “Bonding characteristics of multifilament polymer yarns and cement matrices.” Composites, Part A 39 (6): 930–939. https://doi.org/10.1016/j.compositesa.2008.03.012.
Pino, V., H. Akbari Hadad, F. De Caso y Basalo, A. Nanni, U. Ali Ebead, and A. El Refai. 2017a. “Performance of FRCM-strengthened RC beams subject to fatigue.” J. Bridge Eng. 22 (10): 04017079. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001107.
Pino, V., A. Nanni, D. Arboleda, C. Roberts-Wollmann, and T. Cousins. 2017b. “Repair of damaged prestressed concrete girders with FRP and FRCM composites.” J. Compos. Constr. 21 (3): 04016111. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000773.
Quadflieg, T., S. Leimbrink, T. Gries, and O. Stolyarov. 2018. “Effect of coating type on the mechanical performance of warp-knitted fabrics and cement-based composites.” J. Compos. Mater. 52 (19): 2563–2576. https://doi.org/10.1177/0021998317750003.
Ranade, R., J. Zhang, J. P. Lynch, and V. C. Li. 2014. “Influence of micro-cracking on the composite resistivity of engineered cementitious composites.” Cem. Concr. Res. 58: 1–12. https://doi.org/10.1016/j.cemconres.2014.01.002.
Raza, S. S., and L. A. Qureshi. 2021. “Effect of carbon fiber on mechanical properties of reactive powder concrete exposed to elevated temperatures.” J. Build. Eng. 42: 102503. https://doi.org/10.1016/j.jobe.2021.102503.
Signorini, C., and A. Nobili. 2021. “Targeting functionalised carbon nanotubes at the interphase of Textile Reinforced Mortar (TRM) composites.” Composites, Part A 144: 106330. https://doi.org/10.1016/j.compositesa.2021.106330.
Signorini, C., A. Nobili, A. Sola, and M. Messori. 2020. “Designing epoxy viscosity for optimal mechanical performance of coated Glass Textile Reinforced Mortar (GTRM) composites.” Constr. Build. Mater. 233: 117325. https://doi.org/10.1016/j.conbuildmat.2019.117325.
Signorini, C., A. Sola, A. Nobili, and C. Siligardi. 2019. “Lime-cement textile reinforced mortar (TRM) with modified interphase.” J. Appl. Biomater. Funct. Mater. 17 (1): 228080001982782. https://doi.org/10.1177/2280800019827823.
Silva, F. d. A., M. Butler, S. Hempel, R. D. Toledo Filho, and V. Mechtcherine. 2014. “Effects of elevated temperatures on the interface properties of carbon textile-reinforced concrete.” Cem. Concr. Compos. 48: 26–34. https://doi.org/10.1016/j.cemconcomp.2014.01.007.
Thomas, J. J., H. M. Jennings, and J. J. Chen. 2009. “Influence of nucleation seeding on the hydration mechanisms of tricalcium silicate and cement.” J. Phys. Chem. C 113 (11): 4327–4334. https://doi.org/10.1021/jp809811w.
Trainor, K. J., B. W. Foust, and E. N. Landis. 2013. “Measurement of energy dissipation mechanisms in fracture of fiber-reinforced ultrahigh-strength cement-based composites.” J. Eng. Mech. 139 (7): 771–779. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000545.
Wu, S., T. Qureshi, and G. Wang. 2021. “Application of graphene in fiber-reinforced cementitious composites: A review.” Energies 14 (15): 4614. https://doi.org/10.3390/en14154614.
Xu, S., M. Krüger, H.-W. Reinhardt, and J. Ožbolt. 2004. “Bond characteristics of carbon, alkali resistant glass, and aramid textiles in mortar.” J. Mater. Civ. Eng. 16 (4): 356–364. https://doi.org/10.1061/(ASCE)0899-1561(2004)16:4(356).
Yang, H., H. Cui, W. Tang, Z. Li, N. Han, and F. Xing. 2017. “A critical review on research progress of graphene/cement based composites.” Composites, Part A 102: 273–296. https://doi.org/10.1016/j.compositesa.2017.07.019.
Zamir, M., R. Sripada, and A. Peled. 2019. “Hybrid fillers in carbon-fabric-reinforced cement-based composites.” Cem. Concr. Compos. 98: 113–124. https://doi.org/10.1016/j.cemconcomp.2019.02.005.
Zhang, M., and M. Deng. 2022. “Fabric-to-cementitious matrix bond behavior in carbon fabric reinforced cementitious matrix (FRCM) composites with added short fibers.” Compos. Struct. 300: 116173. https://doi.org/10.1016/j.compstruct.2022.116173.
Zhao, J., M. Liebscher, A. Michel, K. Schneider, R. Foest, M. Fröhlich, A. Quade, and V. Mechtcherine. 2020. “Plasma-generated silicon oxide coatings of carbon fibres for improved bonding to mineral-based impregnation materials and concrete matrices.” Cem. Concr. Compos. 114: 103667. https://doi.org/10.1016/j.cemconcomp.2020.103667.
Zhu, M., J.-H. Zhu, T. Ueda, K. Matsumoto, and M. Su. 2021. “Bond behavior of carbon fabric reinforced cementitious matrix (FRCM) composites considering matrix impregnation.” Compos. Struct. 262: 113350. https://doi.org/10.1016/j.compstruct.2020.113350.
Information & Authors
Information
Published In
Journal of Composites for Construction
Volume 28 • Issue 4 • August 2024
Copyright
© 2024 American Society of Civil Engineers.
History
Received: Jul 16, 2023
Accepted: Feb 21, 2024
Published online: Apr 23, 2024
Published in print: Aug 1, 2024
Discussion open until: Sep 23, 2024
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.