Flexural Strengthening of Concrete Structures Using Externally Bonded and Unbonded Prestressed CFRP Laminates: A Literature Review
Publication: Journal of Composites for Construction
Volume 27, Issue 4
Abstract
Carbon fiber-reinforced polymer (CFRP) materials have been widely used in prestressed and non-prestressed systems for the flexural strengthening of concrete structures in many construction projects worldwide. Strengthening with non-prestressed CFRP materials, which is known as passive repair, could lead to an increase in the ultimate capacity of the concrete member. However, it has little effect on its serviceability performance (e.g., cracking, yielding, and deflection properties). Flexural strengthening with prestressed CFRPs provides an active repair technique that positively effects the strength and serviceability of structures. In addition, strengthening with prestressed fiber-reinforced composites efficiently uses the material’s high tensile strength. Although different fiber-reinforced polymer (FRP) materials and forms have been used in prestressing applications, this paper focused on the use of CFRP laminates (e.g., sheets, strips, or plates). These laminates have been widely used due to their excellent mechanical properties, ease of application in various geometrical shapes, good conforming surface area of contact with structures, and low installation costs. A comprehensive literature review was presented on strengthening using prestressed CFRP laminates in conventionally and internally prestressed concrete structures (PCSs). The externally bonded and unbonded prestressed CFRP laminate applications that used different anchorage systems were presented. The flexural behavior, failure modes, and serviceability performance of the strengthened concrete members were discussed. The effects of the prestressing level on ductility and energy absorption and a summary of the recommended optimum prestressing level discussions were presented in this paper. Furthermore, a review of the theoretical studies that were conducted for prestressed CFRP applications was provided. The knowledge gaps in the research area and future research recommendations were presented.
Get full access to this article
View all available purchase options and get full access to this article.
References
Abdulhameed, S. S., E. Wu, and B. Ji. 2013. “Mechanical prestressing system for strengthening reinforced concrete members with prestressed carbon-fiber-reinforced polymer sheets.” J. Perform. Constr. Facil. 29 (3): 04014081. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000478.
ACI (American Concrete Institute). 2017. Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures. ACI 440.2R-17. Farmington Hills, MI: ACI.
ACI (American Concrete Institute). 2008. Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures. ACI 440.2R-08. Farmington Hills, MI: ACI.
ACI (American Concrete Institute). 2002a. Building code requirements for structural concrete and commentary. ACI 318-02 and ACI 318R-02, ACI Committee 318. Farmington Hills, MI: ACI.
ACI (American Concrete Institute). 2002b. Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures. ACI 440.2R-02. Farmington Hills, MI: ACI.
Alhusain, M., and A. Al-Mayah. 2022. “Novel wedge anchorage for CFRP plates BT.” In Proc., 10th Int. Conf. on FRP Composites in Civil Engineering, edited by A. Ilki, M. Ispir, and P. Inci, 2197–2208. Cham, Switzerland: Springer.
Andre Picard, B., B. Massicotte, and J. Bastien. 1995. “Relative efficiency of external prestressing.” J. Struct. Eng. 121 (12): 1832–1841. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:12(1832).
Aram, M. R., C. Czaderski, and M. Motavalli. 2008. “Effects of gradually anchored prestressed CFRP strips bonded on prestressed concrete beams.” J. Compos. Constr. 12 (1): 25–34. https://doi.org/10.1061/(ASCE)1090-0268(2008)12:1(25).
CEB-FIP (Comité Euro-International Du Beton). 1993. Model code 1993. London: Thomas Telford.
Chen, S., X. Wang, and Y. Jia. 2009. “A comparative study of continuous steel–concrete composite beams prestressed with external tendons: Experimental investigation.” J. Constr. Steel Res. 65 (7): 1480–1489. https://doi.org/10.1016/J.JCSR.2009.03.005.
CSA (Canadian Standard Association). 2000. Canadian highway bridge design code (CHBDC). CAN/CSA-S6-00. Rexdale, ON, Canada: CSA.
Czaderski, C., and M. Motavalli. 2007. “40-Year-old full-scale concrete bridge girder strengthened with prestressed CFRP plates anchored using gradient method.” Composites, Part B 38 (7–8): 878–886. https://doi.org/10.1016/J.COMPOSITESB.2006.11.003.
Czaderski-Forchmann, C. 2012. Strengthening of reinforced concrete members by prestressed, externally bonded reinforcement with gradient anchorage. Zurich, Switzerland: ETH Zurich.
Diab, H., Z. Wu, and K. Iwashita. 2009. “Short and long-term bond performance of prestressed FRP sheet anchorages.” Eng. Struct. 31 (5): 1241–1249. https://doi.org/10.1016/J.ENGSTRUCT.2009.01.021.
El-Hacha, R., M. F. Green, and R. G. Wight. 2004. “Flexural behaviour of concrete beams strengthened with prestressed carbon fibre reinforced polymer sheets subjected to sustained loading and low temperature.” Can. J. Civ. Eng. 31 (2): 239–252. https://doi.org/10.1139/L03-091.
El-Hacha, R., R. G. Wight, and M. F. Green. 2001. “Prestressed fibre-reinforced polymer laminates for strengthening structures.” Prog. Struct. Eng. Mater. 3 (2): 111–121. https://doi.org/10.1002/PSE.76.
El-Hacha, R., R. G. Wight, and M. F. Green. 2003. “Innovative system for prestressing fiber-reinforced polymer sheets.” Struct. J. 100 (3): 305–313. https://doi.org/10.14359/12605.
Erki, M.-A. 1999. “Fiber-reinforced polymers for structural engineering in Canada.” Struct. Eng. Int. 9 (4): 278–281.
fib (International Federation for Structural Concrete). 2001. Externally bonded FRP reinforcement for RC structures. fib Bulletin 14. Lausanne, Switzerland: fib.
Gao, P., X. Gu, and A. S. Mosallam. 2016. “Flexural behavior of preloaded reinforced concrete beams strengthened by prestressed CFRP laminates.” Compos. Struct. 157: 33–50. https://doi.org/10.1016/j.compstruct.2016.08.013.
Garden, H. N., and L. C. Hollaway. 1998. “An experimental study of the failure modes of reinforced concrete beams strengthened with prestressed carbon composite plates.” Composites, Part B 29 (4): 411–424. https://doi.org/10.1016/S1359-8368(97)00043-7.
Haghani, R., M. Al-Emrani, and R. Kliger. 2015. “A new method for strengthening concrete structures using prestressed FRP laminates.” In Proc., implementing innovative ideas in structural engineering and projectmanagement, edited by S. Saha, Y. Zhang, S. Yazdani, and A. Singh, 1153–1158. Fargo, ND: ISEC Press.
Harmanci, Y. 2013. Prestressed CFRP for structural retrofitting: Experimental and analytical investigation. Zurich, Switzerland: ETH Zurich.
Harmanci, Y. E., J. Michels, C. Czaderski, and M. Motavalli. 2016. “Calculation technique for externally unbonded CFRP strips in structural concrete retrofitting.” J. Eng. Mech. 142 (6): 04016026. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001014.
Hollaway, L. C. 2010. “A review of the present and future utilisation of FRP composites in the civil infrastructure with reference to their important in-service properties.” Constr. Build. Mater. 24 (12): 2419–2445.
Hollaway, L. C., and M. Leeming. 1999. Strengthening of reinforced concrete structures: Using externally-bonded FRP composites in structural and civil engineering. Amsterdam, Netherlands: Elsevier.
Hong, S., and S. K. Park. 2012. “Effect of prestress levels on flexural and debonding behavior of reinforced concrete beams strengthened with prestressed carbon fiber reinforced polymer plates.” J. Compos. Mater. 47 (17): 2097–2111.https://doi.org/10.1177/0021998312454318.
Hong, S., and S. K. Park. 2016. “Effect of prestress and transverse grooves on reinforced concrete beams prestressed with near-surface-mounted carbon fiber-reinforced polymer plates.” Composites, Part B 91: 640–650. https://doi.org/10.1016/J.COMPOSITESB.2016.01.018.
Hong, S., and S. K. Park. 2017. “Concrete beams strengthened with prestressed unbonded carbon-fiber-reinforced polymer plates: An experimental study.” Polym. Compos. 38 (11): 2459–2471. https://doi.org/10.1002/PC.23833.
Hutchinson, A. R., and H. Rahimi. 1993. “Behaviour of reinforced concrete beams with externally bonded fibre reinforced plastics.” In Proc., 5th Int. Conf. on Structural Faults and Repairs, 221–228. Edinburgh, UK: Engineering Technics Press.
Jeevan, N., H. N. J. Reddy, and R. Prabhakara. 2018. “Flexural strengthening of RC beams with externally bonded (EB) techniques using prestressed and non-prestressed CFRP laminate.” Asian J. Civ. Eng. 19 (7): 893–912. https://doi.org/10.1007/S42107-018-0071-Y/FIGURES/17.
Kaiser, H. P. 1989. “Strengthening of reinforced concrete with epoxy-bonded carbon-fiber plastics.” Ph.D. thesis, Swiss Federal Institute of Technology, ETH.
Kim, Y. J., M. F. Green, and R. G. Wight. 2010. “Effect of prestress levels in prestressed CFRP laminates for strengthening prestressed concrete beams: A numerical parametric study.” PCI J. 55 (2): 96–108. https://doi.org/10.15554/PCIJ.03012010.96.108.
Kim, Y. J., and P. J. Heffernan. 2008. “Fatigue behavior of externally strengthened concrete beams with fiber-reinforced polymers: State of the art.” J. Compos. Constr. 12 (3): 246–256. https://doi.org/10.1061/(ASCE)1090-0268(2008)12:3(246).
Kim, Y. J., J. M. Longworth, R. G. Wight, and M. F. Green. 2008a. “Flexure of two-way slabs strengthened with prestressed or nonprestressed CFRP sheets.” J. Compos. Constr. 12 (4): 366–374. https://doi.org/10.1061/(ASCE)1090-0268(2008)12:4(366).
Kim, Y. J., C. Shi, and M. F. Green. 2008b. “Ductility and cracking behavior of prestressed concrete beams strengthened with prestressed CFRP sheets.” J. Compos. Constr. 12 (3): 274–283. https://doi.org/10.1061/(ASCE)1090-0268(2008)12:3(274).
Kim, Y. J., R. G. Wight, and M. F. Green. 2008c. “Flexural strengthening of RC beams with prestressed CFRP sheets: Development of nonmetallic anchor systems.” J. Compos. Constr. 12 (1): 35–43. https://doi.org/10.1061/(ASCE)1090-0268(2008)12:1(35).
Kotynia, R., K. Lasek, and M. Staskiewicz. 2013. “Flexural behavior of preloaded RC slabs strengthened with prestressed CFRP laminates.” J. Compos. Constr. 18 (3): A4013004. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000421.
Lin, T., and N. H. Burns. 1981. Design of prestressed concrete structures. New York: Wiley.
Matta, F., A. Nanni, A. Abdelrazaq, D. Gremel, and R. Koch. 2009. “Externally post-tensioned carbon FRP bar system for deflection control.” Constr. Build. Mater. 23 (4): 1628–1639. https://doi.org/10.1016/J.CONBUILDMAT.2007.08.002.
Meier, U. 1987. “Bridge repair with high performance composite materials.” Mater. Tech. 4: 125–128.
Meier, U., M. Deuring, H. Meier, and G. Shwegler. 1992. “Strengthening of structures with CFRP laminates: Research and applications in Switzerland.” In Proc., 1st Int. Conf on Advanced Composite Materials in Bridges and Structures, 243–251. Montreal, QC: Canadian Society for Civil Engineering (CSCE).
Meier, U. 1995. “Strengthening of structures using carbon fibre/epoxy composites.” Constr. Build. Mater. 9 (6): 341–351. https://doi.org/10.1016/0950-0618(95)00071-2.
Meier, U., and I. Stöcklin. 2006. “A novel carbon fiber reinforced polymer (CFRP) system for post-strengthening.” In Proc., Int. Conf. on Concrete Repair, Rehabilitation and Retrofitting, edited by M. G. Alexander, H. D. Beushausen, F. Dehn, and P. Moyo, 477–479. London: Taylor and Francis Group.
Michels, J., C. Czaderski, R. El-Hacha, R. Brönnimann, and M. Motavalli. 2012. “Temporary bond strength of partly cured epoxy adhesive for anchoring prestressed CFRP strips on concrete.” Compos. Struct. 94 (9): 2667–2676. https://doi.org/10.1016/J.COMPSTRUCT.2012.03.037.
Michels, J., J. Sena-Cruz, C. Czaderski, and M. Motavalli. 2013. “Structural strengthening with prestressed CFRP strips with gradient anchorage.” J. Compos. Constr. 17 (5): 651–661. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000372.
Michels, J., M. Staśkiewicz, C. Czaderski, R. Kotynia, Y. E. Harmanci, and M. Motavalli. 2016. “Prestressed CFRP strips for concrete bridge girder retrofitting: Application and static loading test.” J. Bridge Eng. 21 (5): 04016003. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000835.
Motavalli, M., and C. Czaderski. 2007. “FRP composites for retrofitting of existing civil structures in Europe: State-of-the-art review.” In Proc., Int. Conf. Compos. Polycon, 17–19. Tampa, FL: American Composites Manufacturers Association.
Naaman, A. E. 1990. “New methodology for the analysis of beams prestressed with external or unbonded tendons.” Spec. Publ. 120: 339–354. https://doi.org/10.14359/2765.
Nader Tehrani, B., D. Mostofinejad, and S. M. Hosseini. 2019. “Experimental and analytical study on flexural strengthening of RC beams via prestressed EBROG CFRP plates.” Eng. Struct. 197: 109395. https://doi.org/10.1016/J.ENGSTRUCT.2019.109395.
Nordin, H. n.d. Strengthening structures with externally prestressed tendons: Literature review. Luleå, Sweden: Dept. of Civil, Environmental and Natural Resources Engineering, Structural and Construction Engineering, Luleå Univ. of Technology.
Nordin, H., and B. Täljsten. 2006. “Concrete beams strengthened with prestressed near surface mounted CFRP.” J. Compos. Constr. 10 (1): 60–68. https://doi.org/10.1061/(ASCE)1090-0268(2006)10:1(60).
Pam, H. J., A. K. H. Kwan, and M. S. Islam. 2001. “Flexural strength and ductility of reinforced normal- and high-strength concrete beams.” Proc. Inst. Civ. Eng. Struct. Build. 146 (4): 381–389. https://doi.org/10.1680/STBU.2001.146.4.381/ASSET/IMAGES/SMALL/STBU146-381-F10.GIF.
Pellegrino, C., and C. Modena. 2009. “Flexural strengthening of real-scale RC and PRC beams with end-anchored pretensioned FRP laminates.” Struct. J. 106 (3): 319–328. https://doi.org/10.14359/56496.
Piatek, B., T. Siwowski, J. Michalowski, and S. Blazewicz. 2020. “Flexural strengthening of RC beams with prestressed CFRP strips: Development of novel anchor and tensioning system.” J. Compos. Constr. 24 (3): 04020015. https://doi.org/10.1061/(asce)cc.1943-5614.0001020.
Quantrill, R. J., and L. C. Hollaway. 1998. “The flexural rehabilitation of reinforced concrete beams by the use of prestressed advanced composite plates.” Compos. Sci. Technol. 58 (8): 1259–1275. https://doi.org/10.1016/S0266-3538(98)00002-5.
Rezazadeh, M., J. Barros, and I. Costa. 2015. “Analytical approach for the flexural analysis of RC beams strengthened with prestressed CFRP.” Composites, Part B 73: 16–34. https://doi.org/10.1016/J.COMPOSITESB.2014.12.016.
Rezazadeh, M., I. Costa, and J. Barros. 2014. “Influence of prestress level on NSM CFRP laminates for the flexural strengthening of RC beams.” Compos. Struct. 116 (1): 489–500. https://doi.org/10.1016/J.COMPSTRUCT.2014.05.043.
Rizkalla, S., and P. Labossiere. 1999. “Structural engineering with FRP-in Canada.” Concr. Int. 21 (10): 25–28.
Rostasy, F. S. 1993. “Strengthening of R/C and P/C structures with bonded steel and FRP plates.” In Proc., 5th Int. Conf. on Structures Faults and Repair. Edinburgh, UK: Univ. of Edinburgh.
Saadatmanesh, H., and M. R. Ehsani. 1991. “RC beams strengthened with GFRP plates. I: Experimental study.” J. Struct. Eng. 117 (11): 3417–3433.
Said, H., and Z. Wu. 2008. “Evaluating and proposing models of predicting IC debonding failure.” J. Compos. Constr. 12 (3): 284–299. https://doi.org/10.1061/(ASCE)1090-0268(2008)12:3(284).
Sena-Cruz, J., J. Michels, Y. E. Harmanci, and L. Correia. 2015. “Flexural strengthening of RC slabs with prestressed CFRP strips using different anchorage systems.” Polymers 7 (10): 2100–2118. https://doi.org/10.3390/POLYM7101502.
SIA (Schweizer Ingenieur-und Architektenverein). 2004. Klebebewehrung (bonded reinforcement). SIA 166. Zurich, Switzerland: SIA.
Stoecklin, I., and U. Meier. 2003. “Strengthening of concrete structures with prestressed and gradually anchored CFRP strips.” In Fibre-Reinforced Polymer Reinforcement for Concrete Structures, 1321–1330. Singapore: World Scientific.
Suter, R., and D. Jungo. 2001. “Vorgespannte CFK-Lamellen zur Verstärkung von Bauwerken.” Beton- Stahlbetonbau 96 (5): 350–358. https://doi.org/10.1002/BEST.200100370.
Taerwe, L., and S. Matthys. 1999. “FRP for concrete construction: Activities in Europe.” Concr. Int. 21 (10): 33–36.
Teng, J. G., S. T. Smith, J. Yao, and J. F. Chen. 2003. “Intermediate crack-induced debonding in RC beams and slabs.” Constr. Build. Mater. 17 (6–7): 447–462. https://doi.org/10.1016/S0950-0618(03)00043-6.
Triantafillou, T. C., N. Deskovic, and M. Deuring. 1992. “Strengthening of concrete structures with prestressed fiber reinforced plastic sheets.” Struct. J. 89 (3): 235–244.
Triantafillou, T. C., and N. Plevris. 1992. “Strengthening of RC beams with epoxy-bonded fibre-composite materials.” Mater. Struct. 25 (4): 201–211. https://doi.org/10.1007/BF02473064.
Wang, J., Y. Jia, G. Zhang, J. Han, and J. Liu. 2018. “Experimental study on prestressed concrete hollow slabs in service strengthened with prestressed CFRP plates.” Int. J. Struct. Integrity 9 (5): 587–602. https://doi.org/10.1108/IJSI-08-2017-0049/FULL/XML.
Wang, W.-W., J.-G. Dai, K. A. Harries, and Q.-H. Bao. 2012. “Prestress losses and flexural behavior of reinforced concrete beams strengthened with posttensioned CFRP sheets.” J. Compos. Constr. 16 (2): 207–216. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000255.
Wight, R. G., M. F. Green, and M. A. Erki. 1995. “Post-strengthening concrete beams with prestressed FRP sheets.” In RILEM Proc. London: Chapman & Hall.
Wight, R. G., M. F. Green, and M.-A. Erki. 2001. “Prestressed FRP sheets for poststrengthening reinforced concrete beams.” J. Compos. Constr. 5 (4): 214–220. https://doi.org/10.1061/(ASCE)1090-0268(2001)5:4(214).
Woo, S. K., J. W. Nam, J. H. J. Kim, S. H. Han, and K. J. Byun. 2008. “Suggestion of flexural capacity evaluation and prediction of prestressed CFRP strengthened design.” Eng. Struct. 30 (12): 3751–3763. https://doi.org/10.1016/J.ENGSTRUCT.2008.06.013.
Xue, W., Y. Tan, and L. Zeng. 2010. “Flexural response predictions of reinforced concrete beams strengthened with prestressed CFRP plates.” Compos. Struct. 92 (3): 612–622. https://doi.org/10.1016/J.COMPSTRUCT.2009.09.036.
Yang, D. S., S. K. Park, and K. W. Neale. 2009. “Flexural behaviour of reinforced concrete beams strengthened with prestressed carbon composites.” Compos. Struct. 88 (4): 497–508. https://doi.org/10.1016/J.COMPSTRUCT.2008.05.016.
Yang, J., R. Haghani, and M. Al-Emrani. 2017. “Flexural strengthening of reinforced concrete beams using externally bonded FRP laminates prestressed with a new method.” In Proc., 4th Int. Conf. on Smart Monitoring, Assessment and Rehabilitation of Civil Structures. Paris: Rilem.
You, Y. C., K. S. Choi, and J. Kim. 2012. “An experimental investigation on flexural behavior of RC beams strengthened with prestressed CFRP strips using a durable anchorage system.” Composites, Part B 43 (8): 3026–3036. https://doi.org/10.1016/J.COMPOSITESB.2012.05.030.
Yu, P., P. F. Silva, and A. Nanni. 2008. “Description of a mechanical device for prestressing of carbon fiber-reinforced polymer sheets - Part I.” Struct. J. 105 (1): 3–10. https://doi.org/10.14359/19063.
Information & Authors
Information
Published In
Journal of Composites for Construction
Volume 27 • Issue 4 • August 2023
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Jun 14, 2022
Accepted: Mar 21, 2023
Published online: May 17, 2023
Published in print: Aug 1, 2023
Discussion open until: Oct 17, 2023
ASCE Technical Topics:
- Carbon fibers
- Composite materials
- Engineering materials (by type)
- Fiber reinforced composites
- Fiber reinforced polymer
- Fibers
- Flexural strength
- Laminated materials
- Material mechanics
- Material properties
- Materials engineering
- Materials processing
- Polymer
- Prestressing
- Strength of materials
- Structural behavior
- Structural engineering
- Structural strength
- Synthetic materials
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.