Compressive Properties of Cross-Laminated Timber Panels Made of Hardwood Tree Species from the Appalachian Region
Publication: Journal of Architectural Engineering
Volume 29, Issue 1
Abstract
Cross-laminated timber (CLT) panels are an innovative wooden product that has gained popularity in recent years because it has a high strength-to-weight ratio, improves construction efficiency, and it is a natural and renewable material. Therefore, the recently released 2021 International Building Code (IBC) include guidelines for CLT panels for the construction of buildings of up to 18 stories. The construction applications of CLT panels as well as the research initiatives have largely centered on softwood tree species such as laminates, and the application of hardwood species has yet to be investigated. This paper documents the structural behavior of several hardwood species abundant in the Appalachian region and demonstrates the promising feasibility of using these species in the construction industry with CLT panels considering the architectural and structural behavior and economic aspects. The hardwood tree species selected are abundant in the Appalachian region and this paper highlights their potential as a construction material and provides an insight for future development. Three hardwood species including red maple, sweetgum, and sycamore are considered for this study, and three- and five-ply panels are fabricated to evaluate their behavior. The samples are tested in three directions for compression to understand the orthotropic behavior. Considering the softwood species including southern yellow pine and Douglas fir as a baseline for comparison, a total of 120 samples are tested and evaluated based on ASTM standards. The results show an average higher compressive strength from sweetgum panels followed by red maple, sycamore, Douglas fir, and southern yellow pine in the main directions used for structural walls. The findings imply a potential market for the underutilized hardwood species in Appalachia, which may lead to future economic development in the region.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The authors gratefully acknowledge funding from the University of Kentucky Office of Sustainability to conduct the study presented in this paper. The authors acknowledge the lumber from hardwood tree species donated by JT Lumber in Woodbine, KY. The authors acknowledge the donation from the Henkel company for providing the CLT glue manufacturer. The authors acknowledge Dr. Abeetha Peiris and Robert Day for the guidance and assistance in setup and use of laboratory equipment. The authors are grateful to Mr. Ed Demaree for his insights from the industry perspective.
References
Adhikari, S., H. Quesada, B. Bond, and T. Hammett. 2020a. “Potential of hardwood lumber in cross laminated timber in North America: A CLT manufacturer’s perspective.” Mass Timber Construct. J. 3 (1): 1–9.
Adhikari, S., H. Quesada, B. Bond, T. Hammett, and A. Driscoll. 2020b. “Current status of hardwood sawmills to produce structural grade hardwood lumber.” Mass Timber Construct. J. 4 (1): 10–18.
Allison, R., E. Deal, and L. Jahn. 1987. “Production and uses of yellow-poplar framing lumber.” For. Prod. J. 37 (10): 31–36.
ASTM. 2020. Standard test method for evaluating properties of wood-based fiber and particle panel materials, 19428–12959. ASTM D1037-12. West Conshohocken, PA: ASTM.
Beagley, K. S. M., J. R. Loferski, D. P. Hindman, and J. C. Bouldin. 2014. “Investigation of hardwood cross-laminated timber design.” In Proc., World Conf., for Timber Engineering. Quebec: World Conference on Timber Engineering (WCTE).
Branco, J. M., M. Kekeliak, and P. B. Lourenço. 2015. “In-plane stiffness of timber floors strengthened with CLT.” Eur. J. Wood Wood Prod. 73 (3): 313–323. https://doi.org/10.1007/s00107-015-0892-2.
Brandner, R. 2013. “Production and technology of cross laminated timber (CLT): A state-of-the-art report.” In Vol. 21 of Focus Solid Timber Solutions-European Conference on Cross Laminated Timber, 3–36. Bath, UK: University of Bath.
Bucur, V., and P. A. Martin. 2011. Delamination in wood, wood products and wood-based composites. Dordrecht, Netherlands: Springer.
Da Silva, A., and S. Kyriakides. 2007. “Compressive response and failure of balsa wood.” Int. J. Solids Struct. 44 (25–26): 8685–8717. https://doi.org/10.1016/j.ijsolstr.2007.07.003.
Deng, Q., S. Li, and Y. Chen. 2012. “Mechanical properties and failure mechanism of wood cell wall layers.” Comput. Mater. Sci 62: 221–226. https://doi.org/10.1016/j.commatsci.2012.05.050.
Dey, D. C. 2014. “Sustaining oak forests in Eastern North America: Regeneration and recruitment, the pillars of sustainability.” For. Sci. 60 (5): 926–942. https://doi.org/10.5849/forsci.13-114.
Donaldson, L. 2010. “Delamination of wood at the microscopic scale: Current knowledge and methods.” In Delamination in wood, wood products and wood-based composites, edited by V. Bucur, 123–144. Dordrecht, Netherlands: Springer.
Espinoza, O., and U. Buehlmann. 2018. “Cross-laminated timber in the USA: Opportunity for hardwoods?” Curr. For. Rep. 4 (1): 1–12. https://doi.org/10.1007/s40725-018-0071-x.
Ganey, R. S. 2015. “Seismic design and testing of rocking cross laminated timber walls.” Ph.D. thesis, Dept. of Civil and Enviromental Engineering, Univ. of Washington.
Hematabadi, H., M. Madhoushi, A. Khazaeyan, G. Ebrahimi, D. Hindman, and J. Loferski. 2020. “Bending and shear properties of cross-laminated timber panels made of poplar (Populus alba).” Constr. Build. Mater. 265: 120326. https://doi.org/10.1016/j.conbuildmat.2020.120326.
Izzi, M., D. Casagrande, S. Bezzi, D. Pasca, M. Follesa, and R. Tomasi. 2018. “Seismic behaviour of cross-laminated timber structures: A state-of-the-art review.” Eng. Struct. 170: 42–52. https://doi.org/10.1016/j.engstruct.2018.05.060.
Johnson, J., D. Caldwell, and A. Johnson. 2020. “Hardwood market report.” Volume XCVIII, Number 8. Accessed February 21, 2020. www.hmr.com.
Kremer, P. D., and M. A. Symmons. 2015. “Mass timber construction as an alternative to concrete and steel in the Australia building industry: A PESTEL evaluation of the potential.” Int. Wood Prod. J. 6 (3): 138–147. https://doi.org/10.1179/2042645315Y.0000000010.
Luppold, W., J. Baumgras, and G. Barrett. 2001. “Utilization of the eastern hardwood resource by the hardwood sawmilling industry.” North. J. Appl. For. 18 (2): 37–41. https://doi.org/10.1093/njaf/18.2.37.
Mohamadzadeh, M., and D. Hindman. 2018. “Comparison of mode II fracture toughness test methods for wood and wood-based composites.” J. Test. Eval. 46 (5): 20160555. https://doi.org/10.1520/JTE20160555.
Moses, D. M., and H. G. L. Prion. 2004. “Stress and failure analysis of wood composites: A new model.” Composites, Part B 35 (3): 251–261. https://doi.org/10.1016/j.compositesb.2003.10.002.
Mugabo, I., A. R. Barbosa, and M. Riggio. 2019. “Dynamic characterization and vibration analysis of a four-story mass timber building.” Front. Built Environ. 5: 86. https://doi.org/10.3389/fbuil.2019.00086.
NHLA (National Hardwood Lumber Association). 2019. “Rules for the Measurement and Inspection of Hardwood Lumber and Cypress.” 1 January. 2019-rulebook_web.pdf. nhla.com.
Niman, C., and B. Ammerman. 2021. “It may be a good time to sell your mature hardwood timber.” Econ. Policy Update (21): 6. Dept. of Agricultural Economics, University of Kentucky, June 29th, 2021.
Oliver, C. D., N. T. Nassar, B. R. Lippke, and J. B. McCarter. 2014. “Carbon, fossil fuel, and biodiversity mitigation with wood and forests.” J. Sustainable For. 33 (3): 248–275. https://doi.org/10.1080/10549811.2013.839386.
Ostapska, K., and K. A. Malo. 2021. “Crack path tracking using DIC and XFEM modelling of mixed-mode fracture in wood.” Theor. Appl. Fract. Mech. 112: 102896. https://doi.org/10.1016/j.tafmec.2021.102896.
ONU. 2014. World population prospects. The 2012 revision. Methodology of the United Nations Population Estimates and Projections. New York: United Nations Department of Economic and Social Affairs.
Ringe, J. 1988. “The feasibility and competitive nature of yellow poplar structural lumber using value-added analysis.” For. Prod. J. 9 (38): 22–26.
Rizzi, E., M. Capovilla, M. Piazza, and I. Giongo. 2019. “In-plane behavior of timber diaphragms retrofitted with CLT panels.” In Structural analysis of historical constructions, edited by R. Aguilar, D. Torrealva, S. Moreira, M. A. Pando, and L. F. Ramos, 1613–1622. Cham, Switzerland: Springer.
Ross, R. J. 2010. Wood handbook: Wood as an engineering material. General Technical Report FPL-GTR-190. Madison, WI: USDA Forest Service, Forest Products Laboratory.
Sain, M. M., J. Balatinecz, and S. Law. 2000. “Creep fatigue in engineered wood fiber and plastic compositions.” J. Appl. Polym. Sci. 77 (2): 260–268. https://doi.org/10.1002/(SICI)1097-4628(20000711)77:2%3C260::AID-APP3%3E3.0.CO;2-H.
Shahnewaz, I., T. Tannert, M. Shahria Alam, and M. Popovski. 2017. “In-plane stiffness of cross-laminated timber panels with openings.” Struct. Eng. Int. 27 (2): 217–223. https://doi.org/10.2749/101686617X14881932436131.
Stringer, J., B. Thomas, B. Ammerman, C. Niman, D. Agyeman, S. Nevels, and T. Ochuodho. 2021. “Kentucky Forest Sector Economic Contribution Report 2019-2020.” Accessed October 12, 2021. http://forestry.ca.uky.edu/files/ky_contribution_report2019-2020_final_small.pdf.
Thomas, W. R., T. O. Ochuodho, C. F. Niman, M. T. Springer, D. A. Agyeman, and L. R. Lhotka. 2021. “Stakeholder perceptions of white oak supply in Kentucky: A SWOT-AHP analysis.” Small-Scale For. 20 (2): 279–304. https://doi.org/10.1007/s11842-020-09468-z.
Tjeerdsma, B. F., M. Boonstra, A. Pizzi, P. Tekely, and H. Militz. 1998. “Characterisation of thermally modified wood: Molecular reasons for wood performance improvement.” Holz als Roh- und Werkstoff 56 (3): 149. https://doi.org/10.1007/s001070050287.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Feb 5, 2022
Accepted: Oct 17, 2022
Published online: Dec 5, 2022
Published in print: Mar 1, 2023
Discussion open until: May 5, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.