The Behavior of Horizontal Anchor Foundations Embedded in Sand under Uplift and Lateral Loads
Publication: International Journal of Geomechanics
Volume 24, Issue 6
Abstract
The existing research on anchor foundations has predominantly focused on their axial load-carrying capacity, disregarding their resistance to the combined uplift and lateral forces during operation. To address this gap, the present study employs a three-dimensional finite-difference analysis to examine the behavior of horizontal anchor foundations buried in sand under the influence of uplift and lateral loads. The novelty of this work lies in the application of combined loading on the shaft head and the subsequent evaluation of both vertical and horizontal displacements of the foundation. The results reveal that the displacements are notably more significant in the horizontal direction. Furthermore, the paper presents a detailed analysis of the foundation’s failure mechanisms under various combinations of vertical and horizontal forces. It is observed that pure vertical forces induce an uplift shear failure, whereas pure horizontal forces lead to a rotational failure. Based on the results, a failure envelope in the V:H loading plane is proposed for the horizontal anchor foundation subjected to oblique loads.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Data generated or analyzed during this study are available from the corresponding author upon reasonable request.
Acknowledgments
This study is a part of the research project titled “Analysis of Performance of Inclined Plate Anchors Embedded in Geosynthetic Reinforced Soil for Transmission Tower Foundations” funded by the Central Power Research Institute, Bangalore (File number: CPRI0007) at the Department of Civil Engineering, Indian Institute of Science, Bangalore. The authors gratefully acknowledge the financial support provided by CPRI, Bangalore, for this study.
References
Evans, T. M., and N. Zhang. 2019. “Three-dimensional simulations of plate anchor pullout in granular materials.” Int. J. Geomech. 19 (4): 04019004. https://doi.org/10.1061/(asce)gm.1943-5622.0001367.
Itasca. 2008. Fast Lagrangian analysis of continua (FLAC 3D, V5.0). Minneapolis: Itasca Consulting Group.
Khuntia, S., and J. Prasad Sahoo. 2018. “Vertical uplift capacity of strip plate anchors embedded horizontally adjacent to cohesive-frictional soil slopes.” Int. J. Geomech. 18 (3): 06018001. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001088.
Kulhawy, F. H., C. H. Trautman, J. F. Beech, T. D. O’Rourke, and W. McGuire. 1983. Transmission line structure foundations for uplift-compression loading. Palo Alto, CA: Electrical Power Research Institute (EPRI).
Kumar, J., and O. Rahaman. 2019. “Vertical uplift resistance of horizontal plate anchors for eccentric and inclined loads.” Can. Geotech. J. 56 (2): 290–299. https://doi.org/10.1139/cgj-2017-0515.
Loukidis, D., T. Chakraborty, and R. Salgado. 2008. “Bearing capacity of strip footings on purely frictional soil under eccentric and inclined loads.” Can. Geotech. J. 45 (6): 768–787. https://doi.org/10.1139/T08-015.
Merifield, R. S., A. V. Lyamin, and S. W. Sloan. 2006. “Three-dimensional lower-bound solutions for the stability of plate anchors in sand.” Géotechnique 56 (2): 123–132. https://doi.org/10.1680/geot.2006.56.2.123.
Meyerhof, G. G. 1973. “The uplift capacity of foundations under oblique loads.” Can. Geotech. J. 10 (1): 64–70. https://doi.org/10.1139/t73-005.
Meyerhof, G. G., and J. I. Adams. 1968. “The ultimate uplift capacity of foundations.” Can. Geotech. J. 5 (4): 225–244. https://doi.org/10.1139/t68-024.
Mukherjee, S., and G. Babu. 2023. “Probabilistic evaluation of uplift capacity of transmission tower foundation using reinforced anchor.” Int. J. Geomech. 23 (11): 04023203. https://doi.org/10.1061/IJGNAI.GMENG-791.
Mukherjee, S., A. K. Choudhary, and G. L. Sivakumar Babu. 2022. “Three-dimensional analysis of inclined anchors in reinforced sand.” Geosynth. Int. 1–15. https://doi.org/10.1680/jgein.22.00318.
Mukherjee, S., L. Kumar, A. K. Choudhary, and G. L. S. Babu. 2021. “Pullout resistance of inclined anchors embedded in geogrid reinforced sand.” Geotext. Geomembr. 49 (5): 1368–1379. https://doi.org/10.1016/j.geotexmem.2021.05.009.
Murray, E. J., and J. D. Geddes. 1987. “Uplift of anchor plates in sand.” J. Geotech. Eng. 113 (3): 202–215. https://doi.org/10.1061/(ASCE)0733-9410(1987)113:3(202).
Murray, E. J., and J. D. Geddes. 1989. “Resistance of passive inclined anchors in cohesionless medium.” Géotechnique 39 (3): 417–431. https://doi.org/10.1680/geot.1989.39.3.417.
Roy, A., C. D. O’loughlin, S. H. Chow, and M. F. Randolph. 2022. “Inclined loading of horizontal plate anchors in sand.” Géotechnique 72: 1051–1067. https://doi.org/10.1680/jgeot.20.P.119.
Taiebat, H. A., and J. P. Carter. 2002. “Bearing capacity of strip and circular foundations on undrained clay subjected to eccentric loads.” Géotechnique 52 (1): 61–64. https://doi.org/10.1680/geot.2002.52.1.61.
Yang, M., J. D. Murff, and C. P. Aubeny. 2010. “Undrained capacity of plate anchors under general loading.” J. Geotech. Geoenviron. Eng. 136 (10): 1383–1393. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000343.
Information & Authors
Information
Published In
Copyright
© 2024 American Society of Civil Engineers.
History
Received: Mar 30, 2023
Accepted: Dec 13, 2023
Published online: Mar 27, 2024
Published in print: Jun 1, 2024
Discussion open until: Aug 27, 2024
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.