Engineering Potential of Pond Ash Geomaterial: A Lightweight Filling Solution
Publication: International Journal of Geomechanics
Volume 24, Issue 8
Abstract
This article presents a comprehensive study on the development and characterization of a novel lightweight filling material, pond ash geomaterial (PAGM), composed of pond ash, expanded polystyrene (EPS) beads, cement, and water. The mechanical properties of the PAGM were systematically investigated through a series of laboratory tests, including density, unconfined compressive strength, stress–strain behavior, initial tangent modulus, energy absorption, and a newly introduced density/strength ratio. The effects of various mix ratios, such as EPS/PA (EPS beads to pond ash), C/PA (cement to pond ash), and W/PA (water to pond ash), were studied. The study showed that PAGM density depended on the EPS/PA ratio and ash gradation. Higher cement content (C/PA) enhanced unconfined compressive strength. Increased EPS/PA ratios reduced strength but enhanced ductility. The initial tangent modulus correlated with strength, while energy absorption related to the EPS/PA, C/PA, and W/PA ratios. The density/strength ratio emerged as a novel parameter to tailor PAGM properties, enabling the material to cater to specific engineering needs. The developed PAGM exhibited promising engineering properties and proved to be a strong and sustainable alternative to traditional lightweight construction materials. This study contributes valuable insights for the optimization and utilization of PAGM in various geotechnical applications.
Practical Applications
Pond ash geomaterial (PAGM) has a wide range of uses in geotechnical engineering, making it an essential solution for a variety of construction projects. The flexibility and on-site customization enable adjusted properties to meet their particular needs. PAGM can be used effectively in controlled backfilling, abutment construction, pipeline trenching, embankment widening, and slope stabilization. Its lightweight design reduces pressure on lateral and subsurface parts, ensuring stability. PAGM offers a sustainable approach to diverse and effective geotechnical solutions by recycling pond ash, an industrial waste product.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and codes generated or used during the study appear in the published article.
References
ASTM. 2007. Standard test method for particle-size analysis of soils. ASTM D422-63. West Conshohocken, PA: ASTM.
ASTM. 2021. Standard test methods for laboratory compaction characteristics of soil using standard effort. ASTM D698-12. West Conshohocken, PA: ASTM.
ASTM. 2023. Standard test methods for specific gravity of soil solids by the water displacement method. ASTM D854-23. West Conshohocken, PA: ASTM.
Beinbrech, G., and R. Hillmann. 1997. “EPS in road construction—Current situation in Germany.” Geotext. Geomembr. 15 (1–3): 39–57. https://doi.org/10.1016/S0266-1144(97)00006-X.
Chenari, R. J., B. Fatahi, A. Ghorbani, and M. N. Alamoti. 2018. “Evaluation of strength properties of cement stabilized sand mixed with EPS beads and fly ash.” Geomech. Eng. 14 (6): 533–544.
Giuliani, F., F. Autelitano, E. Garilli, and A. Montepara. 2020. “Expanded polystyrene (EPS) in road construction: Twenty years of Italian experiences.” Transp. Res. Procedia 45: 410–417. https://doi.org/10.1016/j.trpro.2020.03.033.
Greeley, T. S. 1997. A review of expanded polystyrene (EPS) properties, performance and new applications. Oak Ridge, TN: DOE Office of Scientific and Technical Information.
Harkness, J. S., B. Sulkin, and A. Vengosh. 2016. “Evidence for coal ash ponds leaking in the southeastern United States.” Environ. Sci. Technol. 50 (12): 6583–6592. https://doi.org/10.1021/acs.est.6b01727.
Horvath, J. 1997a. “Special issue on geofoam: Overview and summary.” Geotext. Geomembr. 15 (1–3): 1–3. https://doi.org/10.1016/S0266-1144(97)83444-9.
Horvath, J. 1997b. “The compressible inclusion function of EPS geofoam.” Geotext. Geomembr. 15 (1–3): 77–120. https://doi.org/10.1016/S0266-1144(97)00008-3.
Horvath, J. S. 1996. “Geofoam geosynthetic: Past, present, and future.” Electron. J. Geotech. Eng. 1: 25–27.
Jakka, R. S., G. V. Ramana, and M. Datta. 2010. “Shear behaviour of loose and compacted pond ash.” Geotech. Geol. Eng. 28 (6): 763–778. https://doi.org/10.1007/s10706-010-9337-1.
Khajeh, A., R. Jamshidi Chenari, and M. Payan. 2020. “A review of the studies on soil–EPS composites: Beads and blocks.” Geotech. Geol. Eng. 38 (4): 3363–3383. https://doi.org/10.1007/s10706-020-01252-2.
Khaleghi, M., and M. Heidarvand. 2023. “A novel study on hydro-mechanical characteristics of biopolymer-stabilized dune sand.” J. Cleaner Prod. 398: 136518. https://doi.org/10.1016/j.jclepro.2023.136518.
Khaleghi, M., M. Karimpour-Fard, A. A. Heshmati, and S. L. Machado. 2023. “Thermo-hydro-mechanical response of MSW in a modified large oedometer apparatus.” Int. J. Geomech. 23 (3). https://doi.org/10.1061/IJGNAI.GMENG-7997.
Khaleghi, M., and M. A. Rowshanzamir. 2019. “Biologic improvement of a sandy soil using single and mixed cultures: A comparison study.” Soil Tillage Res. 186: 112–119. https://doi.org/10.1016/j.still.2018.10.010.
Liang, C., Y. Wu, J. Liu, H. Wu, D. Chen, H. Liu, and Y. Song. 2021. “Effect of expanded polystyrene particle size on engineering properties of clayey soil.” Adv. Civ. Eng. 2021: 9951915. https://doi.org/10.1155/2021/9951915.
Lin, L.-K., L.-H. Chen, and R. H. L. Chen. 2010. “Evaluation of geofoam as a geotechnical construction material.” J. Mater. Civ. Eng. 22 (2): 160–170. https://doi.org/10.1061/(ASCE)0899-1561(2010)22:2(160).
Liu, H., A. Deng, and J. Chu. 2006. “Effect of different mixing ratios of polystyrene pre-puff beads and cement on the mechanical behaviour of lightweight fill.” Geotext. Geomembr. 24 (6): 331–338. https://doi.org/10.1016/j.geotexmem.2006.05.002.
Mahongnao, S., P. Sharma, and S. Nanda. 2023. “Conversion of waste materials into different by-products of economic value.” In Waste management and resource recycling in the developing world, edited by P. Singh, P. Verma, R. Singh, A. Ahamad, and A. C. S. Batalhão, 665–699. Amsterdam, Netherlands: Elsevier.
Mann, G., and T. D. Stark. 2007. “Slope stabilization using geofoam.” In Proc., Embankments, Dams, and Slopes: Lessons From the New Orleans Levee Failures and Other Current Issues, Geotechnical Special Publication 161, edited by F. Silva-Tulla and P. G. Nicholson, 1–9. Reston, VA: ASCE.
Marjive, V. R., and B. Ram Rathan Lal. 2016a. “Compressive strength behaviour of stone dust and EPS beads-based material.” In Proc., Geotechnical and Structural Engineering Congress 2016, edited by C. Y. Chandran and M. I. Hoit, 862–870. Reston, VA: ASCE.
Marjive, V. R., and B. Ram Rathan Lal. 2016b. “An experimental study on stone dust and EPS beads based material.” In Proc., Geo-Chicago 2016: Sustainable Materials and Resource Conservation, Geotechnical Special Publication 272, edited by K. R. Reddy, N. Yesiller, D. Zekkos, A. Farid, and A. De, 33–41. Reston, VA: ASCE.
Murphy, G. 1997. “The influence of geofoam creep on the performance of a compressible inclusion.” Geotext. Geomembr. 15 (1–3): 121–131. https://doi.org/10.1016/S0266-1144(97)00009-5.
Nabizadeh Mashizi, M., M. H. Bagheripour, M. M. Jafari, and E. Yaghoubi. 2023. “Mechanical and microstructural properties of a stabilized sand using geopolymer made of wastes and a natural pozzolan.” Sustainability 15 (4): 2966. https://doi.org/10.3390/su15042966.
Nawkhare, S., and B. Ram Rathan Lal. 2017. “Experimental studies on a reinforced bottom ash-based geomaterial.” In Proc., Geotechnical Frontiers 2017: Geotechnical Materials, Modeling, and Testing, Geotechnical Special Publication 280, edited by T. L. Brandon and R. J. Valentine. Reston, VA: ASCE.
Osinubi, K. J., and A. O. Eberemu. 2013. “Hydraulic conductivity of compacted lateritic soil treated with bagasse ash.” Int. J. Environ. Waste Manage. 11 (1): 38. https://doi.org/10.1504/IJEWM.2013.050522.
Padade, A., and J. Mandal. 2012. “Feasibility studies on expanded polystyrene (EPS) geofoams.” In Proc., Int. Conf. on Ground Improvement & Ground Control, 903–909. London, UK: International Society for Soil Mechanics and Geotechnical Engineering (ISSMGE).
Padade, A. H. 2014. Experimental and numerical studies on expanded polystyrene (EPS) geofoam-soil systems. Mumbai, India: IIT Bombay.
Padade, A. H., and J. N. Mandal. 2014. “Expanded polystyrene-based geomaterial with fly ash.” Int. J. Geomech. 14 (6): 1–7. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000390.
Pal, S., and A. Ghosh. 2010. “Influence of physical properties on engineering properties of Class F fly ash.” In Proc., Indian Geotechnical Conf. New Delhi, India: Indian Geotechnical Society.
Pande, A., and A. Padade. 2022. “EPS-based lightweight geomaterial—A review.” Lect. Notes Civ. Eng. 172: 611–623.
Pande, A., and A. Padade. 2023a. “Engineering properties and sustainable applications of pond ash geomaterial incorporating expanded polystyrene beads.” J. Mater. Res. Technol. 26: 9095–9111. https://doi.org/10.1016/j.jmrt.2023.09.041.
Pande, A. Y., and A. H. Padade. 2023b. “Engineering performance of lightweight geomaterial influenced by EPS density and mix ratio.” Emerging Mater. Res. 12: 358–371. https://doi.org/10.1680/jemmr.23.00041.
Pandian, N. 2004. “Fly ash characterization with reference to geotechnical applications.” J. Indian Inst. Sci. 84: 189–216.
Ram Rathan Lal, B., and V. N. Badwaik. 2016. “Experimental studies on bottom ash and expanded polystyrene beads–based geomaterial.” J. Hazard. Toxic Radioact. Waste 20 (2): 1–8. https://doi.org/10.1061/(ASCE)HZ.2153-5515.0000305.
Ram Rathan Lal, B., V. Hinge, S. Nawkhare, and K. Sanker. 2019. “Experimental studies on bottom Ash and blast furnace slag based geomaterial under compressive loading.” In Proc., 8th Int. Conf. on Case Histories in Geotechnical Engineering. Reston, VA: ASCE.
Ram Rathan Lal, B., and S. S. Nawkhare. 2016. “Experimental study on plastic strips and EPS beads reinforced bottom ash based material.” Int. J. Geosynth. Ground Eng. 2 (3): 25. https://doi.org/10.1007/s40891-016-0066-2.
Raymon, S. 1961. “Pulverized fuel ash as embankment material.” Proc. Inst. Civ. Eng. 19 (4): 515–536. https://doi.org/10.1680/iicep.1961.11308.
Somayaji. 1985. Civil engineering materials. 2nd ed. London, UK: Pearson Publications.
Stark, T., D. Arellano, J. Horvath, and D. Leshchinsky. 2004. Geofoam application in design and construction of highway embankments. National Cooperative Highway Research Program (NCHRP) Web Document 65. Washington, DC: Transportation Research Board.
Tsuchida, T., A. Porbaha, and N. Yamane. 2001. “Development of a geomaterial from dredged bay mud.” J. Mater. Civ. Eng. 13 (2): 152–160. https://doi.org/10.1061/(ASCE)0899-1561(2001)13:2(152).
Venkata Vydehi, K., A. A. B. Moghal, and B. M. Basha. 2022. “Reliability-based design optimization of biopolymer-amended soil as an alternative landfill liner material.” J. Hazard. Toxic Radioact. Waste 26 (3): 04022011. https://doi.org/10.1061/(ASCE)HZ.2153-5515.0000697.
Wang, J., B. Hu, and J. H. Soon. 2019. “Physical and mechanical properties of a bulk lightweight concrete with expanded polystyrene (EPS) beads and soft marine clay.” Materials 12 (10): 1662. https://doi.org/10.3390/ma12101662.
Xu, Y., L. Jiang, J. Xu, and Y. Li. 2012. “Mechanical properties of expanded polystyrene lightweight aggregate concrete and brick.” Constr. Build. Mater. 27 (1): 32–38. https://doi.org/10.1016/j.conbuildmat.2011.08.030.
Yamada, S., Y. Nagasaka, N. Nishida, and A. Shiroi. 1989. “Light soil mixture with small pieces of expanded polystyrol and sand.” Soil Mech. Found. Eng. 37 (2): 25–30.
Yoonz, G.-L., S.-S. Jeon, and B.-T. Kim. 2004. “Mechanical characteristics of light-weighted soils using dredged materials.” Mar. Georesour. Geotechnol. 22 (4): 215–229. https://doi.org/10.1080/10641190490467747.
Zhou, Y., M. Li, Q. He, and K. Wen. 2018. “Deformation and damping characteristics of lightweight clay–EPS soil under cyclic loading.” Adv. Civ. Eng. 2018: 8093719. https://doi.org/10.1155/2018/8093719.
Information & Authors
Information
Published In
International Journal of Geomechanics
Volume 24 • Issue 8 • August 2024
Copyright
© 2024 American Society of Civil Engineers.
History
Received: Sep 8, 2022
Accepted: Jan 4, 2024
Published online: Jun 13, 2024
Published in print: Aug 1, 2024
Discussion open until: Nov 13, 2024
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.