Effect of Spatial Variability of Soil Properties on Bearing Capacity of Strip Footing under Fuzzy Uncertainty
Publication: ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering
Volume 8, Issue 1
Abstract
The present study investigates the effect of spatial variability of soil parameters on the probability of failure of strip footings against bearing pressure resting on a homogeneous and two-layered soil system. The uncertain parameters (soil properties) are considered as fuzzy variables described by a triangular membership function. To incorporate spatial variability in reliability analysis, both isotropic and anisotropic scales of fluctuation are considered in the numerical simulation. Several design charts (in terms of failure probability) are presented for soil deposits having different friction angles under both isotropic and anisotropic field conditions. Variation of the probability of failure with different coefficients of variation (COVs) of soil internal friction angle is also examined. Scales of fluctuation or spatial correlation lengths are also varied within a wide range to identify the effect on the probability of failure. For a homogeneous soil stratum, results reveal that the difference in the failure probability can increase up to 53% for the variation of COV of soil friction angle and scale of fluctuation. It was also found that the effect of spatial correlation length is significant up to a certain distance which is a function of width of the footing, but beyond that, the effect is negligible.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some data (such as data points of Figs. 4–8, 10–14, and 16 and 17) generated and used during the study are available from the corresponding author by reasonable request.
References
Babu, G. L. S., and A. Srivastava. 2007. “Reliability analysis of allowable pressure on shallow foundation using response surface method.” Comput. Geotech. 34 (3): 187–194. https://doi.org/10.1016/j.compgeo.2006.11.002.
Babu, G. L. S., A. Srivastava, and D. S. N. Murthy. 2006. “Reliability analysis of the bearing capacity of a shallow foundation resting on cohesive soil.” Can. Geotech. J. 43 (2): 217–223. https://doi.org/10.1139/t05-099.
Chan, C. L., and B. K. Low. 2012. “Practical second-order reliability analysis applied to foundation engineering.” Int. J. Numer. Anal. Meth. Geomech. 36 (11): 1387–1409. https://doi.org/10.1002/nag.1057.
Chen, W. F., and D. J. Han. 2007. Plasticity for structural engineers. New York: Springer.
Cherubini, C. 2000. “Reliability evaluation of shallow foundation bearing capacity on c′, ϕ′ soils.” Can. Geotech. J. 37 (1): 264–269. https://doi.org/10.1139/t99-096.
Cho, S. E. 2007. “Effects of spatial variability of soil properties on slope stability.” Eng. Geol. 92 (3−4): 97–109. https://doi.org/10.1016/j.enggeo.2007.03.006.
Dodagoudar, G. R., and G. Venkatachalam. 2000. “Reliability analysis of slopes using fuzzy sets theory.” Comput. Geotech. 27 (2): 101–115. https://doi.org/10.1016/S0266-352X(00)00009-4.
Dong, W. M., and F. S. Wong. 1987. “Fuzzy weighted averages and implementation of the extension principle.” Fuzzy Sets Syst. 21 (2): 183–199. https://doi.org/10.1016/0165-0114(87)90163-1.
El-Ramly, H., N. R. Morgenstern, and D. M. Cruden. 2002. “Probabilistic slope stability analysis for practice.” Can. Geotech. J. 39 (3): 665–683. https://doi.org/10.1139/t02-034.
Fenton, G. A., D, . V. Griffiths, and O. O. Ojomo. 2011. “Consequence factors in the ultimate limit state design of shallow foundations.” Can. Geotech. J. 48 (2): 265–279. https://doi.org/10.1139/T10-053.
Fenton, G. A., D, . V. Griffiths, and X. Zhang. 2008. “Load and resistance factor design of shallow foundations against bearing failure.” Can. Geotech. J. 45 (11): 1556–1571. https://doi.org/10.1139/T08-061.
Fenton, G. A., and D. V. Griffiths. 2003. “Bearing-capacity prediction of spatially random c- soils.” Can. Geotech. J. 40 (1): 54–65. https://doi.org/10.1139/t02-086.
Fenton, G. A., and D. V. Griffiths. 2008. Risk assessment in geotechnical engineering. New York: Wiley.
Giasi, C. I., P. Masi, and C. Cherubini. 2003. “Probabilistic and fuzzy reliability analysis of a sample slope near Aliano.” Eng. Geol. 67 (3−4): 391–402. https://doi.org/10.1016/S0013-7952(02)00222-3.
Griffiths, D. V. 1982. “Computation of bearing capacity factors using finite elements.” Géotechnique 32 (3): 195–202. https://doi.org/10.1680/geot.1982.32.3.195.
Griffiths, D. V., and G. A. Fenton. 2001. “Bearing capacity of spatially random soil: The undrained clay Prandtl problem revisited.” Géotechnique 51 (4): 351–359. https://doi.org/10.1680/geot.2001.51.4.351.
Griffiths, D. V., G. A. Fenton, and N. Manoharan. 2002. “Bearing capacity of rough rigid strip footing on cohesive soil: Probabilistic study.” J. Geotech. Geoenviron. Eng. 128 (9): 743–755. https://doi.org/10.1061/(ASCE)1090-0241(2002)128:9(743).
Griffiths, D. V., G. A. Fenton, and N. Manoharan. 2006. “Undrained bearing capacity of two-strip footings on spatially random soil.” Int. J. Geomech. 6 (6): 421–427. https://doi.org/10.1061/(ASCE)1532-3641(2006)6:6(421).
Haldar, A., and S. Mahadevan. 2000. Probability, reliability and statistical methods in engineering design. New York: Wiley.
Halder, K., and D. Chakraborty. 2019. “Probabilistic bearing capacity of strip footing on reinforced soil slope.” Comput. Geotech. 116 (Dec): 103213. https://doi.org/10.1016/j.compgeo.2019.103213.
Halder, K., and D. Chakraborty. 2020. “Influence of soil spatial variability on the response of strip footing on geocell-reinforced slope.” Comput. Geotech. 122 (Jun): 103533. https://doi.org/10.1016/j.compgeo.2020.103533.
Ji, J., H. J. Liao, and B. K. Low. 2012. “Modeling 2-D spatial variation in slope reliability analysis using interpolated autocorrelations.” Comput. Geotech. 40 (Mar): 135–146. https://doi.org/10.1016/j.compgeo.2011.11.002.
Kasama, K., and A. J. Whittle. 2016. “Effect of spatial variability on the slope stability using random field numerical limit analyses.” Georisk: Assess. Manage. Risk Eng. Syst. Geohazards 10 (1): 42–54. https://doi.org/10.1080/17499518.2015.1077973.
Li, D. Q., X. H. Qi, Z. J. Cao, X. S. G. Tang, W. Zhou, K. K. Phoon, and C. B. Zhou. 2015a. “Reliability analysis of strip footing considering spatially variable undrained shear strength that linearly increases with depth.” Soils Found. 55 (4): 866–880. https://doi.org/10.1016/j.sandf.2015.06.017.
Li, J., Y. Tian, and M. J. Cassidy. 2015b. “Failure mechanism and bearing capacity of footings buried at various depths in spatially random soil.” J. Geotech. Geoenviron. Eng. 141 (2): 04014099. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001219.
Luo, N., and R. J. Bathurst. 2018. “Probabilistic analysis of reinforced slopes using RFEM and considering spatial variability of frictional soil properties due to compaction.” Georisk: Assess. Manage. Risk Eng. Syst. Geohazards 12 (2): 87–108. https://doi.org/10.1080/17499518.2017.1362443.
Luo, Z., S. Atamturktur, C. H. Juang, H. Huang, and P. S. Lin. 2011. “Probability of serviceability failure in a braced excavation in a spatially random field: Fuzzy finite element approach.” Comput. Geotech. 38 (8): 1031–1040. https://doi.org/10.1016/j.compgeo.2011.07.009.
Luo, Z., Y. Li, S. Zhou, and H. Di. 2018. “Effects of vertical spatial variability on supported excavations in sands considering multiple geotechnical and structural failure modes.” Comput. Geotech. 95 (Mar): 16–29. https://doi.org/10.1016/j.compgeo.2017.11.017.
Manoharan, N., and S. P. Dasgupta. 1995. “Bearing capacity of surface footings by finite elements.” Comput. Struct. 54 (4): 563–586. https://doi.org/10.1016/0045-7949(94)00381-C.
Marandi, S. M., M. Anvar, and M. Bahrami. 2016. “Uncertainty analysis of safety factor of embankment built on stone column improved soft soil using fuzzy logic -cut technique.” Comput. Geotech. 75 (May): 135–144. https://doi.org/10.1016/j.compgeo.2016.01.014.
Metya, S., and G. Bhattacharya. 2016. “Reliability analysis of earth slopes considering spatial variability.” Geotech. Geol. Eng.-An Int. J. 34 (1): 103–123. https://doi.org/10.1007/s10706-015-9932-2.
Meyerhof, G. G., and A. M. Hanna. 1978. “Ultimate bearing capacity of foundations on layered soils under inclined load.” Can. Geotech. J. 15 (4): 565–572. https://doi.org/10.1139/t78-060.
Park, H. J., J. G. Um, I. Woo, and J. W. Kim. 2012. “Application of fuzzy set theory to evaluate the probability of failure in rock slopes.” Eng. Geol. 125 (Jan): 92–101. https://doi.org/10.1016/j.enggeo.2011.11.008.
Phoon, K. K., and F. H. Kulhawy. 1999. “Characterazation of geotechnical variability.” Can. Geotech. J. 36 (4): 612–624. https://doi.org/10.1139/t99-038.
Pramanik, R., D. K. Baidya, and N. Dhang. 2019a. “Fuzzy reliability analysis for elastic settlement of surface footing.” In Proc., Geo-Congress 2019: Soil Erosion, Underground Engineering, and Risk Assessment, Geotechnical Special Publication 313, edited by C. L. Meehan, S. Kumar, M. A. Pando, and J. T. Coe, 183–192. Reston, VA: ASCE. https://doi.org/10.1061/9780784482155.019.
Pramanik, R., D. K. Baidya, and N. Dhang. 2019b. “Implementation of fuzzy reliability analysis for elastic settlement of strip footing on sand considering spatial variability.” Int. J. Geomech. 19 (12): 04019126. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001514.
Pramanik, R., D. K. Baidya, and N. Dhang. 2020a. “Reliability analysis for bearing capacity of surface strip footing using fuzzy finite element method.” Geomech. Geoeng. Int. J. 15 (1): 29–41. https://doi.org/10.1080/17486025.2019.1601268.
Pramanik, R., D. K. Baidya, and N. Dhang. 2020b. “Numerical investigation of the bearing capacity factors using the finite element method.” In Vol. 85 of Geotechnical characterization and modelling, 901–916. Singapore: Springer. https://doi.org/10.1007/978-981-15-6086-6_71.
Puła, W., and M. Chwała. 2015. “On spatially averaging along random slip lines in the reliability computations of shallow strip foundations.” Comput. Geotech. 68 (Jul): 128–136. https://doi.org/10.1016/j.compgeo.2015.04.001.
Smith, I. M., D. V. Griffiths, and L. Margetts. 2014. Programming the finite element method. 5th ed. New York: Wiley.
Vanmarcke, E. H. 1977. “Probabilistic modeling of soil profiles.” J. Geotech. Eng. Div. 103 (11): 1227–1246. https://doi.org/10.1061/AJGEB6.0000517.
Wang, T., G. Zhou, J. Wang, and D. Wang. 2020. “Impact of spatial variability of geotechnical properties on uncertain settlement of frozen soil foundation around an oil pipeline.” Geomech. Eng. Int. J. 20 (1): 19–28. https://doi.org/10.12989/gae.2020.20.1.019.
Wu, C. L., J. H. Li, and J. C. Liu. 2020. “Experimental study of a shallow foundation on spatially variable soils.” Georisk: Assess. Manage. Risk Eng. Syst. Geohazards 1–10. https://doi.org/10.1080/17499518.2020.1806333.
Yin, J. H., Y. J. Wang, and A. P. S. Selvadurai. 2001. “Influence of nonassociativity on the bearing capacity of a strip footing.” J. Geotech. Geoenviron. Eng. 127 (11): 985–989. https://doi.org/10.1061/(ASCE)1090-0241(2001)127:11(985).
Youssef Abdel Massih, D. S., and A. Soubra. 2008. “Reliability-based analysis strip footings using response surface methodology.” Int. J. Geomech. 8 (2): 134–143. https://doi.org/10.1061/(ASCE)1532-3641(2008)8:2(134).
Youssef Abdel Massih, D. S., A. Soubra, and B. K. Low. 2008. “Reliability-based analysis and design of strip footings against bearing capacity failure.” J. Geotech. Geoenviron. Eng. 134 (7): 917–928. https://doi.org/10.1061/(ASCE)1090-0241(2008)134:7(917).
Zadeh, L. A. 1965. “Fuzzy sets.” Inf. Control 8 (3): 338–353. https://doi.org/10.1016/S0019-9958(65)90241-X.
Zimmermann, H. J. 2001. Fuzzy set theory and its applications. 4th ed. Boston: Kluwer Academic.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Nov 28, 2020
Accepted: Sep 20, 2021
Published online: Nov 2, 2021
Published in print: Mar 1, 2022
Discussion open until: Apr 2, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Thiago Henrique Barbosa De Carvalho Tavares, Thiago Bomjardim Porto, Eduardo Mazoni Andrade Marçal Mendes, Bruno Pérez Ferreira, Clustering-Based Fuzzy Model for Predicting Anchor Bearing Capacity, International Journal of Geomechanics, 10.1061/IJGNAI.GMENG-6961, 23, 10, (2023).
- Juan C. Viviescas, Probabilistic Analyses of a Post-Grouted Anchor–Soil Bond Friction Performance Considering the Geological Origin and the SPT-N Tendency with Depth, International Journal of Geomechanics, 10.1061/(ASCE)GM.1943-5622.0002627, 23, 1, (2023).
- Rajarshi Pramanik, Dilip Kumar Baidya, Influence of spatial variability of soil elastic modulus on elastic settlement of rectangular footing under fuzzy uncertainty, Innovative Infrastructure Solutions, 10.1007/s41062-022-00819-7, 7, 3, (2022).
- Mehdi Veiskarami, Mohammad Ali Shokoohi, A Lower Bound Estimate of the Bearing Capacity of Foundations on Inherently Anisotropic Sands Implementing the Fabric Tensor, Geotechnical and Geological Engineering, 10.1007/s10706-022-02308-1, 41, 2, (831-845), (2022).