Impact of Partial Hydrate Dissociation on the Mechanical Properties of Methane Hydrate Bearing Coarse-Grained Sediments
Publication: Geo-Congress 2024
ABSTRACT
Conventional methods for recovering methane gas from natural hydrate-bearing sand (HBS) involve dissociating the hydrate, impacting the mechanical properties of the HBS. Existing numerical models used for predicting ground behavior over long-term production are calibrated based on laboratory tests conducted after hydrate formation and not dissociation as limited research studies have been conducted to comprehensively understand the changes in HBS shear strength during dissociation. In this research, experiments were conducted on laboratory-synthesized HBS specimens that had undergone hydrate dissociation to varying degrees by thermal stimulation as well as depressurization revealing notable reductions in both stiffness and peak strength. These observed alterations in mechanical properties commenced within the confines of the bulk hydrate stability region, suggesting the influence of sediment grain size and pore diameter. Further studies aim to explore the other contributing factors to these observations.
Get full access to this article
View all available purchase options and get full access to this chapter.
REFERENCES
Boswell, R., and Collett, T. (2006). The gas hydrates resource pyramid, Fire in the Ice, US Department of Energy, Office of Fossil Energy, National Energy Technology Laboratory, Vol. 6, Issue 3, pp. 5–7.
Choi, J. H., Lin, J. S., Dai, S., Lei, L., and Seol, Y. (2020). Triaxial compression of hydrate-bearing sediments undergoing hydrate dissociation by depressurization. Geomechanics for Energy and the Environment, 23, 100187.
Collett, T. S. (1992). Well log evaluation of natural gas hydrates. United States of America (USA) https://doi.org/10.2172/6824342.
Hovland, M., and Gudmestad, O. T. (2001). Potential Influence of Gas Hydrates on Seabed Installations. In Natural Gas Hydrates: Occurences, Distribution and Detection (eds C.K. Paull and W.P. Dillon).
Hyodo, M., Li, Y., Yoneda, J., Nakata, Y., Yoshimoto, N., and Nishimura, A. (2014). Effects of dissociation on the shear strength and deformation behavior of methane hydrate-bearing sediments. Journal of Marine and Petroleum Geology, Vol. 51, Elsevier, Amsterdam, Netherlands, pp. 52–62. https://doi.org/10.1016/j.marpetgeo.2013.11.015.
Hyodo, M., Li, Y., Yoneda, J., Nakata, Y., Yoshimoto, N., Nishimura, A., and Song, Y. (2013). Mechanical behavior of gas-saturated methane hydrate-bearing sediments. Journal of Geophysical Research: Solid Earth, Vol. 118, Issue 10, pp. 5185–5194.
Jung, J. W., Santamarina, J. C., and Soga, K. (2012). Stress‐strain response of hydrate‐bearing sands: Numerical study using discrete element method simulations. Journal of geophysical research: solid earth, 117(B4).
Kneafsey, T. J., Tomutsa, L., Moridis, G. J., Seol, Y., Freifeld, B. M., Taylor, C. E., and Gupta, A. (2007). Methane hydrate formation and dissociation in a partially saturated core-scale sand sample. Journal of Petroleum Science And Engineering, Vol. 56, Issues 1–3, pp. 108–126.
Lei, L., and Seol, Y. (2020). Pore‐scale investigation of methane hydrate‐bearing sediments under triaxial condition. Geophysical Research Letters, 47(5), e2019GL086448.
Minagawa, H., Ohmura, R., Kamata, Y., Nagao, J., Ebinuma, T., Narita, H., and Masuda, Y. (2009). Water permeability of porous media containing methane hydrate as controlled by the methane-hydrate growth process. AAPG Memoir. Vol. 89, pp 734–739.
Nixon, M. F., and Grozic, J. L. H. (2007). Submarine slope failure due to gas hydrate dissociation: A preliminary quantification. Canadian Geotechnical Journal, Vol. 44, Issue 3, pp. 314–325.
Pandey, M. R., Priest, J. A., and Hayley, J. L. (2022). Comparison of small-strain stiffness of laboratory synthesized hydrate bearing sands for different formation methods In Proceedings of the 75th Canadian Geotechnical Conference, Calgary, Canada.
Paull, C. K., Ussler, I., and Holbrook, W. S. (2011). Tracking the decomposition of submarine permafrost and gas hydrate under the shelf and slope of the Beaufort Sea. In Proceedings of the 7th International Conference on Gas Hydrates (ICGH 2011), Edinburgh, Scotland.
Peng, D., and Robinson, D. (1976). New Two-Constant Equation of State. Industrial & Engineering Chemistry Fundamentals. Vol. 15. https://doi.org/10.1021/i160057a011.
Priest, J. A., and Hayley, J. L. (2019). Strength of laboratory synthesized hydrate-bearing sands and their relationship to natural hydrate-bearing sediments. Journal of Geophysical Research: Solid Earth, Vol. 124, Issue 12, pp. 12556–12575.
Priest, J. A., Hayley, J. L., Smith, W. E., Schultheiss, P., and Roberts, J. (2018). PCATS triaxial testing: Geomechanical properties of sediments from pressure cores recovered from the Bay of Bengal during expedition NGHP-02. Marine and Petroleum Geology Journal, Vol. 108, pp. 424–438.
Priest, J. A., Rees, E. V. L., and Clayton, C. R. I. (2009). Influence of gas hydrate morphology on the seismic velocities of sands. Journal of Geophysical Research Atmospheres, Vol. 114, Issue B11, pp. B11205/1–13.
Priest, J. A., Best, A. I., and Clayton, C. R. I. (2005). A laboratory investigation into the seismic velocities of methane gas hydrate-bearing sand. Journal of Geophysical Research: Solid Earth, Vol. 110, Issue B4, pp. B04102/1–13.
Sloan, E. D., Jr., Koh, C. A., and Koh, C. A. (2007). Clathrate Hydrates of Natural Gases (3rd ed.). CRC Press. https://doi.org/10.1201/9781420008494.
Song, Y., Zhu, Y., Liu, W., Zhao, J., Li, Y., Chen, Y., and Ji, C. (2014). Experimental research on the mechanical properties of methane hydrate-bearing sediments during hydrate dissociation. Marine and petroleum geology, 51, 70–78.
Sultan, N., Foucher, J. P., Cochonat, P., Tonnerre, T., Bourillet, J. F., Ondreas, H., Cauquil, E., and Grauls, D. (2004). Dynamics of gas hydrate: Case of the Congo continental slope, Marine Geology, Volume 206, Issues 1–4.
Sultaniya, A. K., Priest, J. A., and Clayton, C. R. I. (2015). Measurements of the changing wave velocities of sand during the formation and dissociation of disseminated methane hydrate, Journal of Geophysical Research: Solid Earth, Vol. 120, Issue 2, pp. 778–789.
Sultaniya, A. K., Priest, J. A., and Clayton, C. R. I. (2017). Impact of formation and Dissociation Conditions on Stiffness of a Hydrate Bearing Sand, Canadian Geotechnical Journal, Vol. 55, pp. 988–998.
United Nations Environment Programme. (2023). Global Climate Litigation Report: 2023 Status Review. https://wedocs.unep.org/20.500.11822/43008.
Waite, W. F., et al. (2009). Physical properties of hydrate-bearing sediments. Reviews of Geophysics, Vol. 47, Issue 4 [RG4003].
Wesbrook, G. K., et al. (2009). Escape of methane gas from the seabed along the West Spitsbergen continental margin, Journal of Geophysical Research Letters, Vol. 36, Issue 15, pp. L15608/1–5.
Wright, J. F., Chuvilin, E. M., Dillimore, S. R. Yakushev, V. S., and Nixon, F. M. (1998). Methane hydrate formation and dissociation in fine sands at temperatures near 0 °C, In Proceedings of the 7th International Conference on Permafrost Yellowknife (Canada) Collection Nordicana No. 55.
Yamamoto, K., Boswell, R., Collett, T. S., Dallimore, S. R., and Lu, H. (2022). Review of Past Gas Production Attempts from Subsurface Gas Hydrate Deposits and Necessity of Long-Term Production Testing, Energy & Fuels, Vol. 36, Issue 10, pp. 5047–5062. https://doi.org/10.1021/acs.energyfuels.1c04119.
Yoneda, J., Oshima, M., Kida, M., Kato, A., Konno, Y., Jin, Y., Jang, J., Waite, W. F., Kumar, P., and Tenma, N. (2019c). Permeability variation and anisotropy of gas hydrate-bearing pressure-core sediments recovered from the Krishna–Godavari basin, offshore India. Journal of Marine and Petroleum Geology, Vol. 108, pp. 524–536.
Zhang, X. H., Luo, D. S., Lu, X. B., Liu, L. L., and Liu, C. L. (2018). Mechanical properties of gas hydrate-bearing sediments during hydrate dissociation. Acta Mechanica Sinica 34 266–274.
Information & Authors
Information
Published In
History
Published online: Feb 22, 2024
ASCE Technical Topics:
- Analysis (by type)
- Chemicals
- Chemistry
- Engineering fundamentals
- Environmental engineering
- Geomechanics
- Geotechnical engineering
- Hydration
- Laboratory tests
- Laminating
- Material mechanics
- Material properties
- Materials engineering
- Materials processing
- Mechanical properties
- Methane
- Models (by type)
- Numerical analysis
- Numerical models
- Organic compounds
- River engineering
- Sediment
- Soil mechanics
- Soil properties
- Tests (by type)
- Water and water resources
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.