Electromagnetic Induction-Based Regional Subsurface Characterization of Mountainous Environments: Examples from Puerto Rico
Publication: Geo-Congress 2024
ABSTRACT
The physical and mechanical characterization of the subsurface under hillslopes is critical for understanding the distribution of mass wasting by landslides and debris flows, which are two significant processes that drive topographic change in steep environments. Hillslope environments are notoriously spatially complex. However, subsurface characterization is rarely performed on regional scales due to challenges in characterizing highly localized variations. Common methods for subsurface characterization involve costly site-specific sampling and testing leading to point measurements or regional remote sensing techniques. Currently, a gap in scale compatibility exists between site-specific analysis where characterization of the subsurface is robust but spatially limited and regional hazard analyses where characterization is limited to regionally broad categories based on lithology, slope, and/or vegetation. This research explores electromagnetic induction (EM) as a scalable approach to characterize relative differences in physico-mechanical properties of the subsurface in steep terrain where mass wasting is common. For this study, EM data was collected in different geologic units across southwest Puerto Rico (PR), then converted to apparent resistivity values. The apparent resistivity of lithologic groups and limestone subunits were statistically compared leveraging the large datasets collected. Two study areas are selected to examine spatial trends and the effects of topographic factors. The results indicate that EM can detect differences between and within geologic units/subunits and help estimate subsurface heterogeneity where detailed mapping is unavailable.
Get full access to this article
View all available purchase options and get full access to this chapter.
REFERENCES
Allred, B. J., Daniels, J. J., and Ehsani, M. R. (2008). “Electromagnetic Induction Methods.” Handbook of Agricultural Geophysics, Daniels, J. J., Vendl, M., Ehsani, M. R., and Allred, J.J. CRC Press, (109–128).
Bawiec, W. J., ed. (1998). “Geology, Geochemistry, Geophysics, Mineral Occurrences and Mineral Resource Assessment for the Commonwealth of Puerto Rico.”.
Donner, W., and Rodriguez, H. (2008). “Population Composition, Migration and Inequality: The Influence of Demographic Changes on Disaster Risk and Vulnerability.” Social Forces, 87(2), 1089–1114.
Doolittle, J. A., and Brevik, E. C. (2014). “The Use of Electromagnetic Induction Techniques in Soil Studies” Geoderma, 223-225, 33–45.
Finco, C., Rejiba, F., Schamper, C., Cavalcante Fraga, L. H., and Wang, A. (2023). “Calibration of near-surface multi-frequency electromagnetic induction data.” Geophysical Prospecting, 71, 765–779.
Godio, A., and Bottino, G. (2001). “Electrical and Electromagnetic Investigation for Landslide Characterisation.” Physics and Chemistry of the Earth (C), 9, 705–710.
Hubbard, S. S., Schmutz, M., Balde, A., Falco, N., Peruzzo, L., Dafflon, B., Léger, E., and Wu, Y. (2021). “Estimation of Soil Classes and Their Relationship to Grapevine Vigor in a Bordeaux Vineyard: Advancing the Practical Joint Use of Electromagnetic Induction (EMI) and NDVI Datasets for Precision Viticulture.” Precision Agriculture, 22(4), 1353–1376.
Huang, H. (2005). “Depth of investigation for small broadband electromagnetic sensors.” Geophysics, 70(6).
McCann, D. M., and Forster, A. (1990). “Reconnaissance Geophysical Methods in Landslide Investigations.” Engineering Geology, 29(1), 59–78.
Mohammed, M., El Mahmoudi, A., and Almolhem, Y. (2022). “Applications of Electromagnetic Induction and Electrical Resistivity Tomography for Digital Monitoring and Assessment of the Soil: A Case Study of Al-Ahsa Oasis, Saudi Arabia.” Applied Sciences, 12(4).
Monroe, W. H. (1980). “Geology of the Middle Tertiary Formations of Puerto Rico.” U.S. Geological Survey.
Morales, A., et al. (2022). “Geotechnical Impacts of Hurricane Fiona in Puerto Rico”. Geotechnical Extreme Event Reconnaissance (GEER) Association,. Online Publication.
Morales-Velez, A. C., Suarez, L. E., Bernal, J., Hughes, K. S., Perez, J. C., and Rodriguez, L. A. (2020). “2020 Puerto Rico Earthquake”. Geotechnical Extreme Event Reconnaissance (GEER) Association,. Online Publication.
Triantafilis, J., and Lesch, S. M. (2005). “Mapping Clay Content Variation Using Electromagnetic Induction Techniques.” Computers and Electronics in Agriculture, 46(1–3), 203–237.
Schmitt, R. G., et al. (2020). “Field Observations Of Ground Failure Triggered By the 2020 Puerto Rico earthquake sequence.” U.S. Geological Survey.
Silva-Tulla, F., et al. (2018). “2017 Hurricane Maria.” Geotechnical Extreme Event Reconnaissance (GEER) Association,. Online Publication.
Smith, R. (2013). “Electromagnetic Induction Methods in Mining Geophysics from 2008 to 2012.” Surveys in Geophysics, 35(1), 123–56.
USGS. (2020). 3D Elevation Program 1/3 Arc-Second Resolution Digital Elevation Model (published 2020, 05, 05 and 2020, 05, 06), accessed February 2, 2023.
Won, I. J., Keiswetter, D. A., Fields, G. R. A., and Sutton, L. C. (1996). “GEM-2: A New Multifrequency Electromagnetic Sensor.” Journal of Environmental and Engineering Geophysics, 1(2), 129–137.
Information & Authors
Information
Published In
History
Published online: Feb 22, 2024
ASCE Technical Topics:
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.