An Automated Image-Based Approach to Derive Beach Grain Size Characteristics
Publication: Geo-Congress 2024
ABSTRACT
The grain size characteristics of sandy beach sediments can vary on spatiotemporal scales. To address this, several automatic grain sizing techniques that use digital images to develop the grain size distribution curves have been developed. However, the moisture content is often not accounted for in these methods, despite its known influence on image tone and highly variable nature at sandy beaches. In this paper, a simple method to account for moisture content variation at sand beaches when applying AGS is tested. This involves a series of image preprocessing steps and a correction factor, β, that is used to convert the results of grain size curves obtained from one method so they are equivalent to another method. Previous work suggests that there is a single value of β. However, for the sands tested, it was found that β decreased as the moisture content increased. The results of this study demonstrate that the moisture content influences the grain sizes and grain size distribution characteristics derived from automatic approaches, and can be accounted for using a simple correction factor that is a function of the moisture content.
Get full access to this article
View all available purchase options and get full access to this chapter.
REFERENCES
Abuodha, J. O. Z. 2003. “Grain size distribution and composition of modern dune and beach sediments, Malindi Bay coast, Kenya.” Journal of African Earth Sciences, 36 (1–2): 41–54. https://doi.org/10.1016/S0899-5362(03)00016-2.
ASTM. 2017a. Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis. ASTM D6913. ASTM International, West Conshohocken, PA, 04 (Reapproved 2009): 1–35. https://doi.org/10.1520/D6913-04R09.2.
ASTM. 2017b. Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System), ASTM D2487-17. ASTM International, West Conshohocken, PA, USA, D2487-17: 1–10. https://doi.org/10.1520/D2487-17.
Buscombe, D. 2020. “SediNet: a configurable deep learning model for mixed qualitative and quantitative optical granulometry.” Earth Surf. Process. Landforms, 45 (3): 638–651. https://doi.org/10.1002/esp.4760.
Dean, R. G., and R. A. Dalrymple. 2001. Coastal Processes with Engineering Applications. Cambridge University Press.
Dingler, J. R., and T. E. Reiss. 2002. “Changes to Monterey Bay beaches from the end of the 1982-83 El Niño through the 1997-98 El Niño.” Marine Geology, 181 (1–3): 249–263. https://doi.org/10.1016/S0025-3227(01)00270-5.
Duncan, J. M., S. G. Wright, and T. L. Brandon. 2014. Soil Strength and Slope Stability. Hoboken, N.J.: John Wiley and Sons.
Ferreira, T., and W. Rasband. 2012. ImageJ User Guide.
Gallagher, E. L., J. MacMahan, A. J. H. M. Reniers, J. Brown, and E. B. Thornton. 2011. “Grain size variability on a rip-channeled beach.” Marine Geology, 287 (1–4): 43–53. Elsevier B.V. https://doi.org/10.1016/j.margeo.2011.06.010.
Gallagher, E., H. Wadman, J. McNinch, A. Reniers, and M. Koktas. 2016. “A Conceptual Model for Spatial Grain Size Variability on the Surface of and within Beaches.” Journal of Marine Science and Engineering, 4 (2): 38. https://doi.org/10.3390/jmse4020038.
van Genuchten, M. T. 1980. “A Closed-form Equation for Predicting the Hydraulic Conductivity of Unsaturated Soils.” Soil Science Society of America Journal, 44 (5): 892–898. https://doi.org/10.2136/sssaj1980.03615995004400050002x.
Graham, D. J., S. P. Rice, and I. Reid. 2005. “A transferable method for the automated grain sizing of river gravels: Method for grain sizing river gravels.” Water Resour. Res., 41 (7). https://doi.org/10.1029/2004WR003868.
Hillel, D. 1998. Environmental Soil Physics. Cambridge, M.A: Academic Press.
Kellerhals, R., and D. I. Bray. 1971. “Sampling Procedures for Coarse Fluvial Sediments.” J. Hydr. Div., 97 (8): 1165–1180. https://doi.org/10.1061/JYCEAJ.0003044.
Lillesand, J., R. W. Kiefer, and J. Chipman. 2015. Remote Sensing and Image Interpretation. Hoboken, N.J.: John Wiley and Sons.
MacMahan, J. H., E. B. Thornton, T. P. Stanton, and A. J. H. M. Reniers. 2005. “RIPEX: Observations of a rip current system.” Marine Geology, 218 (1–4): 113–134. https://doi.org/10.1016/j.margeo.2005.03.019.
McFall, B., D. Young, K. Fall, D. Krafft, S. Whitmeyer, A. Melendez, and D. Buscombe. 2020. Technical Feasibility of Creating a Beach Grain Size Database with Citizen Scientists. https://doi.org/10.21079/11681/36456.
Paprocki, J., N. Stark, and H. Wadman. forthcoming. “A Framework for Assessing the Bearing Capacity of Sandy Coastal Soils from Remotely Sensed Moisture Contents.” Journal of Geotechnical and Geoenvironmental Engineering. https://doi.org/10.1061/JGGEFK/GTENG-11339.
Prodger, S., P. Russell, and M. Davidson. 2017. “Grain-size distributions on high-energy sandy beaches and their relation to wave dissipation.” Sedimentology, 64 (5): 1289–1302. https://doi.org/10.1111/sed.12353.
Prodger, S., P. Russell, M. Davidson, J. Miles, and T. Scott. 2016. “Understanding and predicting the temporal variability of sediment grain size characteristics on high-energy beaches.” Marine Geology, 376: 109–117. Elsevier B.V. https://doi.org/10.1016/j.margeo.2016.04.003.
Reniers, A. J. H. M., E. L. Gallagher, J. H. MacMahan, J. A. Brown, A. A. Van Rooijen, J. S. M. Van Thiel De Vries, and B. C. Van Prooijen. 2013. “Observations and modeling of steep-beach grain-size variability.” Journal of Geophysical Research: Oceans, 118 (2): 577–591. https://doi.org/10.1029/2012JC008073.
Soulsby, R. 1997. Dynamics of Marine Sands: A Manual for Practical Applications. London: Thomas Telford Publishing.
Stark, N., P. Mewis, B. Reeve, M. Florence, J. Piller, and J. Simon. 2022. “Vertical pore pressure variations and geotechnical sediment properties at a sandy beach.” Coastal Engineering, 172 (June 2021): 104058. Elsevier B.V. https://doi.org/10.1016/j.coastaleng.2021.104058.
Stauble, D. K. 1992. Long-term profile and sediment morphodynamics : Field Research Facility case history. Vicksburg, Miss.: Availaable from National Technical Information Service,.
Strom, K. B., R. D. Kuhns, and H. J. Lucas. 2010. “Comparison of Automated Image-Based Grain Sizing to Standard Pebble-Count Methods.” Journal of Hydraulic Engineering, 136 (8): 461–473. https://doi.org/10.1061/(asce)hy.1943-7900.0000198.
Thornton, E. B., J. MacMahan, and A. H. Sallenger. 2007. “Rip currents, mega-cusps, and eroding dunes.” Marine Geology, 240 (1–4): 151–167. https://doi.org/10.1016/j.margeo.2007.02.018.
Tuttle, S. D. 1960. “Evolution of the New Hampshire shore line.” Geological Society of America Bulletin, 71 (8): 1211–1222. Geological Society of America.
USACE. 2023. “SandSnap.” SandSnap. https://sandsnap-erdcchl.hub.arcgis.com/.
Wang, J.-P., N. Hu, B. Françoise, and P. Lambert. 2017. “Unsaturated Sandy Soils From Basic Soil Gradation Parameters.” Water Resources Research, 53: 6069–6088. https://doi.org/10.1002/2017WR020411.Received.
Ward, L., N. Corcoran, Z. McAvoy, and R. Morrison. 2021a. Seasonal Changes in Sediment Grain Size of New Hampshire Atlantic Beaches.
Ward, L., K. McPherran, Z. McAvoy, and M. Vallee-Anziani. 2016. New Hampshire Beaches: Sediment Characterization.
Ward, L., R. Morrison, A. Eberhardt, W. Costello, Z. McAvoy, and C. Mandeville. 2021b. Erosion and Accretion Trends of New Hampshire Beaches from December 2016 to March 2020: Results of the Volunteer Beach Profile Monitoring Program.
Information & Authors
Information
Published In
History
Published online: Feb 22, 2024
ASCE Technical Topics:
- Automation and robotics
- Beaches
- Coastal engineering
- Coasts, oceans, ports, and waterways engineering
- Computer vision and image processing
- Curvature
- Engineering fundamentals
- Geomechanics
- Geometry
- Geotechnical engineering
- Grain (material)
- Hydrologic engineering
- Hydrologic properties
- Hydrology
- Material mechanics
- Material properties
- Materials engineering
- Mathematics
- Methodology (by type)
- Shores
- Soil mechanics
- Soil properties
- Soil water
- Systems engineering
- Water and water resources
- Water content
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.