Postural Assessment Criteria for Manual Material Handling
Publication: Construction Research Congress 2024
ABSTRACT
The construction industry is one of the industries with the highest rates of musculoskeletal disorders (MSDs). Masons are particularly susceptible to overexertion and back injuries due to the physical demands of their jobs and, thus, are more susceptible to MSDs. While previous research established that expert masons use different strategies to perform their work while experiencing reduced joint loads and increased productivity, it was unclear which movement strategies they used. This study analyzed the movements of novice, apprentice, and expert masons to characterize the postural characteristics of expert and in-expert techniques. Novice, apprentice, and expert masons’ kinematics are analyzed for a standard concrete masonry unit wall-building activity and investigated the key markers of these techniques, such as trunk flexion and twisting. Masonry movement techniques refer to the kinematics and postures that the expert journeymen adopt while working. The results of this study describe the movement strategies experts use in comparison to inexpert groups (novices and apprentices).
Get full access to this article
View all available purchase options and get full access to this chapter.
REFERENCES
Alwasel, A., Abdel-Rahman, E. M., Haas, C. T., and Lee, S. (2017a). Experience, Productivity, and Musculoskeletal Injury among Masonry Workers. Journal of Construction Engineering and Management, 143(6), 05017003. doi:https://doi.org/10.1061/(Asce)Co.1943-7862.0001308.
Alwasel, A., Sabet, A., Nahangi, M., Haas, C. T., and Abdel-Rahman, E. (2017b). Identifying poses of safe and productive masons using machine learning. Automation in Construction, 84, 345–355. doi:https://doi.org/10.1016/j.autcon.2017.09.022.
Anton, D., Bray, M., Hess, J. A., Weeks, D. L., Kincl, L. D., and Vaughan, A. (2020). Prevalence of work-related musculoskeletal pain in masonry apprentices. Ergonomics, 63(9), 1194–1202. doi:10.1080/00140139.2020.1772380.
Authier, M., Gagnon, M., and Lortie, M. (1995). Handling Techniques: The Influence of Weight and Height for Experts and Novices. Int J Occup Saf Ergon, 1(3), 262–275. doi:10.1080/10803548.1995.11076324.
Authier, M., Lortie, M., and Gagnon, M. (1996). Manual handling techniques: Comparing novices and experts. International Journal of Industrial Ergonomics, 17(5), 419–429. doi:Doi 10.1016/0169-8141(95)00005-4.
Chen, J. Y., Qiu, J., and Ahn, C. B. (2017). Construction worker’s awkward posture recognition through supervised motion tensor decomposition. Automation in Construction, 77, 67–81. doi:https://doi.org/10.1016/j.autcon.2017.01.020.
Choi, S. D. (2012). A study of trade-specific occupational ergonomics considerations in the US construction industry. Work, 42(2), 215–222.
Clemes, S. A., Haslam, C. O., and Haslam, R. A. (2010). What constitutes effective manual handling training? A systematic review. Occupational Medicine, 60(2), 101–107.
CPWR. (2018, Feb 18). The Construction Chart Book: The U.S. Construction Industry and Its Workers. 6th. Retrieved from https://www.cpwr.com/sites/default/files/publications/5th%20Edition%20Chart%20Book%20Final.pdf.
Diraneyya, M. M., Ryu, J., Abdel-Rahman, E., and Haas, C. T. (2021). Inertial Motion Capture-Based Whole-Body Inverse Dynamics. Sensors (Basel), 21(21), 7353. doi:10.3390/s21217353.
Gagnon, M. (2005). Ergonomic identification and biomechanical evaluation of workers’ strategies and their validation in a training situation: summary of research. Clin Biomech (Bristol, Avon), 20(6), 569–580. doi:10.1016/j.clinbiomech.2005.03.007.
Hess, J., Weinstein, M., and Welch, L. (2010). Ergonomic best practices in masonry: regional differences, benefits, barriers, and recommendations for dissemination. J Occup Environ Hyg, 7(8), 446–455. doi:https://doi.org/10.1080/15459624.2010.484795.
Hess, J. A., Kincl, L., Weeks, D. L., Vaughan, A., and Anton, D. (2020). Safety Voice for Ergonomics (SAVE): Evaluation of a masonry apprenticeship training program. Appl Ergon, 86, 103083. doi:10.1016/j.apergo.2020.103083.
Hogan, D. A., Greiner, B. A., and O’Sullivan, L. (2014). The effect of manual handling training on achieving training transfer, employee’s behaviour change and subsequent reduction of work-related musculoskeletal disorders: a systematic review. Ergonomics, 57(1), 93–107. doi:10.1080/00140139.2013.862307.
Kincl, L. D., Anton, D., Hess, J. A., and Weeks, D. L. (2016). Safety voice for ergonomics (SAVE) project: protocol for a workplace cluster-randomized controlled trial to reduce musculoskeletal disorders in masonry apprentices. BMC public health, 16(1), 362. doi:10.1186/s12889-016-2989-x.
Limbu, B. H., Jarodzka, H., Klemke, R., and Specht, M. (2018). Using sensors and augmented reality to train apprentices using recorded expert performance: A systematic literature review. Educational Research Review, 25, 1–22.
NIOSH. (2014). Observation-based posture assessment: review of current practice and recommendations for improvement. Cin-cinnati, OH: U.S. Department of Health and Human Services, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, DHHS (NIOSH): By Lowe BD, Weir PL, Andrews DM.
Noitom Ltd. (2017). “Perception Neuron”. Retrieved from https://neuronmocap.com/.
Robert-Lachaine, X., Mecheri, H., Larue, C., and Plamondon, A. (2017). Validation of inertial measurement units with an optoelectronic system for whole-body motion analysis. Med Biol Eng Comput, 55(4), 609–619. doi:https://doi.org/10.1007/s11517-016-1537-2.
Robert-Lachaine, X., Mecheri, H., Muller, A., Larue, C., and Plamondon, A. (2020). Validation of a low-cost inertial motion capture system for whole-body motion analysis. J Biomech, 99, 109520. doi:10.1016/j.jbiomech.2019.109520.
Ryu, J., Alwasel, A., Haas, C. T., and Abdel-Rahman, E. (2020a). Analysis of Relationships between Body Load and Training, Work Methods, and Work Rate: Overcoming the Novice Mason’s Risk Hump. Journal of Construction Engineering and Management, 146(8), 04020097.
Ryu, J., Banting, B., Abdel-Rahman, E., and Haas, C. T. (2023). Ergonomic Characteristics of Expert Masons. Journal of Construction Engineering and Management, 149(1), 04022150.
Ryu, J., Diraneyya, M. M., Haas, C. T., and Abdel-Rahman, E. (2020b). Analysis of the Limits of Automated Rule-Based Ergonomic Assessment in Bricklaying. Journal of Construction Engineering and Management, 147(2), 04020163. doi:https://doi.org/10.1061/(ASCE)CO.1943-7862.0001978.
Ryu, J., McFarland, T., Banting, B., Haas, C. T., and Abdel-Rahman, E. (2020c). Health and productivity impact of semi-automated work systems in construction. Automation in Construction, 120, 103396. doi:https://doi.org/10.1016/j.autcon.2020.103396.
Ryu, J., McFarland, T., Haas, C. T., and Abdel-Rahman, E. (2020d). Automatic Clustering of Proper Working Posture. Paper presented at the 27th International Workshop on Intelligent Computing in Engineering, Berlin, Germany.
Ryu, J., McFarland, T., Haas, C. T., and Abdel-Rahman, E. (2022). Automatic clustering of proper working postures for phases of movement. Automation in Construction, 138, 104223.
Ryu, J., Seo, J., Jebelli, H., and Lee, S. (2019a). Automated Action Recognition Using an Accelerometer-Embedded Wristband-Type Activity Tracker. Journal of Construction Engineering and Management, 145(1). doi:https://doi.org/10.1061/(Asce)Co.1943-7862.0001579.
Ryu, J., Seo, J., Liu, M. Y., Lee, S., and Haas, C. T. (2016). Action Recognition Using a Wristband-Type Activity Tracker: Case Study of Masonry Work. Construction Research Congress 2016: Old and New Construction Technologies Converge in Historic San Juan, 790–799. Retrieved from <Go to ISI>://WOS:000389279901029.
Ryu, J., Zhang, L., Diraneyya, M., Haas, C. T., Abdel-Rahman, E., and Banting, B. (2019b). Ergonomic Assessment of Standard vs. Heavy-Weight CMU Lifts. Paper presented at the 13th North American Masonry Conference (NAMC), Salt Lake City, UT, USA.
Teizer, J., Cheng, T., and Fang, Y. H. (2013). Location tracking and data visualization technology to advance construction ironworkers’ education and training in safety and productivity. Automation in Construction, 35, 53–68. doi:10.1016/j.autcon.2013.03.004.
Valero, E., Sivanathan, A., Bosche, F., and Abdel-Wahab, M. (2016). Musculoskeletal disorders in construction: A review and a novel system for activity tracking with body area network. Appl Ergon, 54, 120–130. doi:https://doi.org/10.1016/j.apergo.2015.11.020.
Valero, E., Sivanathan, A., Bosche, F., and Abdel-Wahab, M. (2017). Analysis of construction trade worker body motions using a wearable and wireless motion sensor network. Automation in Construction, 83, 48–55. doi:10.1016/j.autcon.2017.08.001.
Wang, X. W., Dong, X. W. S., Choi, S. D., and Dement, J. (2017). Work-related musculoskeletal disorders among construction workers in the United States from 1992 to 2014. Occupational and environmental medicine, 74(5), 374–380. doi:10.1136/oemed-2016-103943.
Wu, G., et al. (2002). ISB recommendation on definitions of joint coordinate system of various joints for the reporting of human joint motion--part I: ankle, hip, and spine. International Society of Biomechanics. J Biomech, 35(4), 543–548. doi:10.1016/s0021-9290(01)00222-6.
Wu, G., et al. (2005). ISB recommendation on definitions of joint coordinate systems of various joints for the reporting of human joint motion--Part II: shoulder, elbow, wrist and hand. J Biomech, 38(5), 981–992. doi:10.1016/j.jbiomech.2004.05.042.
Xsens. (2016). “Xsens”. Retrieved from http://www.xsens.com.
Zhang, L., Diraneyya, M., Ryu, J., Haas, C., and Abdel-Rahman, E. (2019a). Automated Monitoring of Physical Fatigue Using Jerk. Paper presented at the ISARC. Proceedings of the International Symposium on Automation and Robotics in Construction.
Zhang, L., Diraneyya, M. M., Ryu, J., Haas, C. T., and Abdel-Rahman, E. (2018). Assessment of Jerk As a Method of Physical Fatigue Detection. Paper presented at the ASME 2018 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference.
Zhang, L. C., Diraneyya, M. M., Ryu, J., Haas, C. T., and Abdel-Rahman, E. M. (2019b). Jerk as an indicator of physical exertion and fatigue. Automation in Construction, 104, 120–128. doi:https://doi.org/10.1016/j.autcon.2019.04.016.
Information & Authors
Information
Published In
Construction Research Congress 2024
Pages: 638 - 646
History
Published online: Mar 18, 2024
ASCE Technical Topics:
- Comparative studies
- Construction (by type)
- Construction engineering
- Construction industry
- Construction management
- Construction materials
- Continuum mechanics
- Design (by type)
- Dynamics (solid mechanics)
- Engineering fundamentals
- Engineering materials (by type)
- Engineering mechanics
- Joints
- Kinematics
- Kinetics
- Load factors
- Masonry
- Materials engineering
- Methodology (by type)
- Research methods (by type)
- Solid mechanics
- Structural design
- Structural engineering
- Structural members
- Structural systems
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.